summaryrefslogtreecommitdiff
path: root/testing/source/pkgtools/scripts/installpkg
diff options
context:
space:
mode:
Diffstat (limited to 'testing/source/pkgtools/scripts/installpkg')
-rw-r--r--testing/source/pkgtools/scripts/installpkg713
1 files changed, 713 insertions, 0 deletions
diff --git a/testing/source/pkgtools/scripts/installpkg b/testing/source/pkgtools/scripts/installpkg
new file mode 100644
index 00000000..0d82f89c
--- /dev/null
+++ b/testing/source/pkgtools/scripts/installpkg
@@ -0,0 +1,713 @@
+#!/bin/sh
+# Copyright 1994, 1998, 2000 Patrick Volkerding, Concord, CA, USA
+# Copyright 2001, 2003 Slackware Linux, Inc., Concord, CA, USA
+# Copyright 2007, 2009, 2011, 2017, 2018 Patrick Volkerding, Sebeka, MN, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
+# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+# Mon Jun 4 21:17:58 UTC 2018
+# Migrate the package database and directories from /var/log to
+# /var/lib/pkgtools. /var/log was never a good place for this data, as it is
+# considered by many to be a directory that could be wiped to free up some
+# space. Originally the package database was in /var/adm, but the FSSTND
+# (later FHS) group decided that directory should be a symlink to /var/log,
+# and I went along with that since it was years ago and I was a n00b and didn't
+# know any better. /var/lib/pkgtools will be a better and safer location.
+#
+# Thu May 24 20:23:55 UTC 2018
+# Added --terselength option to set the line length in --terse mode.
+# Allow adding NOLOCK in an install script to allow it to run without locking.
+#
+# Sat May 19 22:42:03 UTC 2018
+# Implement locking to prevent screen output or install script collisions if
+# multiple copies of installpkg are running simultaneously.
+# Use ${MCOOKIE} instead of $$ (might as well, since we already generated it).
+#
+# Tue Apr 17 17:26:44 UTC 2018
+# Quit with the funny business in /install. Note however that /install still
+# isn't a safe directory to use in a package for anything other than package
+# metadata. Other files placed there are going to be left on the system in
+# /installpkg-$(mcookie). That could be worked around, but we'll wait until
+# someone reports there is a need. The main reason to do this is that /install
+# was a collision point if more than one copy of installpkg was running at
+# once. With this change, the pkgtools are (more or less) thread-safe.
+#
+# Tue Feb 13 01:19:46 UTC 2018
+# Use recent tar, and support restoring POSIX ACLs and extended attributes.
+#
+# Tue Dec 12 21:49:48 UTC 2017
+# If possible, use multiple decompression threads.
+#
+# Thu Dec 7 04:09:17 UTC 2017
+# Change meaning of .tlz to tar.lz (lzip)
+#
+# Sun Sep 6 21:58:36 BST 2009
+# Replaced usage of "cat" with STDIN redirection or file name parameters
+# to speed up execution on ARM.
+# Replaced pkgbase & package_name code with 'sed' script by Jim Hawkins.
+#
+# Sat Apr 25 21:18:53 UTC 2009
+# Converted to use new pkgbase() function to remove pathname and
+# valid package extensions.
+#
+# Sat Apr 4 22:58:06 CDT 2009
+# Support additional compression formats if the supporting utilities exist:
+# .tbz - bzip2
+# .tlz - lzma
+# .txz - xz (also LZMA)
+# And of course, .tgz (gzip) is not going anywhere. :-) <volkerdi>
+# Add command switches to determine the uncompressed package size even if
+# that will slow things down, and to add the package's md5sum to the
+# metadata stored in /var/log/packages/.
+#
+# Fri Dec 21 17:21:35 CST 2007
+# Added a patch from Johnny Morano to work around package removal issues
+# caused by packages that do not comply with FHS combined with a grep
+# regex error in installpkg. Any package with a single-letter top-
+# level directory could not be removed.
+#
+# Shortened some of the top-line dialog output to avoid overflowing the
+# textbox (needed as some of the packages, especially in X, have very
+# long base package names now). <pjv>
+#
+# Sun Nov 26 12:38:25 CST 1995
+# Added patch from Glenn Moloney <glenn@physics.unimelb.edu.au> to allow
+# packages to be installed to directories other than /.
+#
+# Wed Mar 18 15:15:51 CST 1998
+# Changed $TMP directory to /var/log/setup/tmp, and chmod'ed it 700 to close
+# some security holes.
+
+# Return a package name that has been stripped of the dirname portion
+# and any of the valid extensions (only):
+pkgbase() {
+ # basename + strip extensions .tbz, .tgz, .tlz and .txz
+ echo "$1" | sed 's?.*/??;s/\.t[bglx]z$//'
+}
+
+# If installpkg encounters a problem, it will return a non-zero error code.
+# If it finds more than one problem (i.e. with a list of packages) you'll only
+# hear about the most recent one. :)
+# 1 = tar returned error code
+# 2 = corrupt compression envelope
+# 3 = does not end in .tgz
+# 4 = no such file
+# 5 = external compression utility missing
+# 99 = user abort from menu mode
+EXITSTATUS=0
+
+# Do not store md5sums by default:
+MD5SUM=0
+
+# So that we know what to expect...
+umask 022
+
+# If we have mcookie and a tar that is recent enough to support --transform,
+# then we can stop needlessly erasing files in the /install directory while
+# also making installpkg thread-safe. Don't check for recent tar - we'll
+# already break from --attrs and --xattrs anyway if the wrong tar is used.
+if which mcookie 1> /dev/null 2> /dev/null ; then
+ MCOOKIE=$(mcookie)
+ INSTDIR=installpkg-${MCOOKIE}
+else
+ # Well, we will make due with this:
+ MCOOKIE=$$
+ INSTDIR=installpkg-${MCOOKIE}
+fi
+
+# Create a lockfile directory if it doesn't exist. We can use it to prevent
+# screen corruption (from multiple dialogs) and install script collisions
+# (from multiple scripts trying to work on the same files) in the case of
+# parallel instances of installpkg.
+INSTLOCKDIR=${INSTLOCKDIR:-/run/lock/pkgtools}
+if [ ! -d $INSTLOCKDIR ]; then
+ mkdir -p $INSTLOCKDIR
+fi
+
+usage() {
+ cat << EOF
+Usage: installpkg [options] <package_filename>
+
+Installpkg is used to install a .t{gz,bz,lz,xz} package like this:
+ installpkg slackware-package-1.0.0-i486-1.tgz (or .tbz, .tlz, .txz)
+
+options: --warn (warn if files will be overwritten, but do not install)
+ --root /mnt (install someplace else, like /mnt)
+ --infobox (use dialog to draw an info box)
+ --terse (display a one-line short description for install)
+ --terselength <length> (line length in terse mode - default is
+ the number of columns available)
+ --menu (confirm package installation with a menu, unless
+ the priority is [required] or ADD)
+ --ask (used with menu mode: always ask if a package should be
+ installed regardless of what the package's priority is)
+ --priority ADD|REC|OPT|SKP (provide a priority for the entire
+ package list to use instead of the priority in the
+ tagfile)
+ --tagfile /somedir/tagfile (specify a different file to use
+ for package priorities. The default is "tagfile" in
+ the package's directory)
+ --threads <number> For xz/plzip compressed packages, set the max
+ number of threads to be used for decompression. Only has
+ an effect if a multithreaded compressor was used, and then
+ only on large packages. For plzip, the default is equal to
+ the number of CPU threads available on the machine. For xz,
+ the default is equal to 2.
+ --md5sum (record the package's md5sum in the metadata file)
+
+EOF
+}
+
+# Eliminate whitespace function:
+crunch() {
+ while read FOO ; do
+ echo $FOO
+ done
+}
+
+# Strip version, architecture and build from the end of the name
+package_name() {
+ pkgbase $1 | sed 's?-[^-]*-[^-]*-[^-]*$??'
+}
+
+# Set maximum number of threads to use. By default, this will be the number
+# of CPU threads:
+THREADS="$(nproc)"
+
+# Set default line length for terse mode:
+if tty -s && which tput 1> /dev/null 2> /dev/null ; then
+ TERSELENGTH=$(tput cols)
+else
+ TERSELENGTH=80
+fi
+
+# Default install mode is standard text mode:
+MODE=install
+# If $TERSE is set to 0 in the environment, then use terse mode:
+if [ "$TERSE" = "0" ]; then
+ MODE=terse
+fi
+
+# Parse options:
+while [ 0 ]; do
+ if [ "$1" = "-warn" -o "$1" = "--warn" ]; then
+ MODE=warn
+ shift 1
+ elif [ "$1" = "-md5sum" -o "$1" = "--md5sum" ]; then
+ MD5SUM=1
+ shift 1
+ elif [ "$1" = "-infobox" -o "$1" = "--infobox" ]; then
+ MODE=infobox
+ shift 1
+ elif [ "$1" = "-terse" -o "$1" = "--terse" ]; then
+ MODE=terse
+ shift 1
+ elif [ "$1" = "-terselength" -o "$1" = "--terselength" ]; then
+ TERSELENGTH=$2
+ shift 2
+ elif [ "$1" = "-menu" -o "$1" = "--menu" ]; then
+ MODE=menu
+ shift 1
+ elif [ "$1" = "-ask" -o "$1" = "--ask" ]; then
+ ALWAYSASK="yes"
+ shift 1
+ elif [ "$1" = "-tagfile" -o "$1" = "--tagfile" ]; then
+ if [ -r "$2" ]; then
+ USERTAGFILE="$2"
+ elif [ -r "$(pwd)/$2" ]; then
+ USERTAGFILE="$(pwd)/$2"
+ else
+ usage
+ exit
+ fi
+ shift 2
+ elif [ "$1" = "-threads" -o "$1" = "--threads" ]; then
+ THREADS="$2"
+ shift 2
+ # xz has not yet implemented multi-threaded decompression.
+ # Who knows if or how well it will work...
+ XZ_THREADS_FORCED=yes
+ elif [ "$1" = "-priority" -o "$1" = "--priority" ]; then
+ if [ "$2" = "" ]; then
+ usage
+ exit
+ fi
+ USERPRIORITY="$2"
+ shift 2
+ elif [ "$1" = "-root" -o "$1" = "--root" ]; then
+ if [ "$2" = "" ]; then
+ usage
+ exit
+ fi
+ ROOT="$2"
+ shift 2
+ else
+ break
+ fi
+done
+
+# Set the prefix for the package database directories (packages, scripts).
+ADM_DIR="$ROOT/var/lib/pkgtools"
+
+# Set the prefix for the removed packages/scripts log files:
+LOG_DIR="$ROOT/var/log/pkgtools"
+
+# If the directories don't exist, "initialize" the package database:
+for PKGDBDIR in packages scripts setup ; do
+ if [ ! -d $ADM_DIR/$PKGDBDIR ]; then
+ mkdir -p $ADM_DIR/$PKGDBDIR
+ chmod 755 $ADM_DIR/$PKGDBDIR
+ fi
+done
+for PKGLOGDIR in removed_packages removed_scripts ; do
+ if [ ! -d $LOG_DIR/$PKGLOGDIR ]; then
+ rm -rf $LOG_DIR/$PKGLOGDIR # make sure it's not a symlink or something stupid
+ mkdir -p $LOG_DIR/$PKGLOGDIR
+ chmod 755 $LOG_DIR/$PKGLOGDIR
+ fi
+done
+# Likewise, make sure that the symlinks in /var/log exist. We no longer
+# trust anything to remain in /var/log. Let the admin wipe it if that's
+# what they like.
+for symlink in packages scripts setup ; do
+ if [ ! -L $LOG_DIR/../$symlink -a ! -d $LOG_DIR/../$symlink ]; then
+ ( cd $LOG_DIR/.. ; ln -sf ../lib/pkgtools/$symlink . )
+ fi
+done
+
+# Make sure there's a proper temp directory:
+TMP=$ADM_DIR/setup/tmp
+# If the $TMP directory doesn't exist, create it:
+if [ ! -d $TMP ]; then
+ mkdir -p $TMP
+ chmod 700 $TMP # no need to leave it open
+fi
+
+# usage(), exit if called with no arguments:
+if [ $# = 0 ]; then
+ usage;
+ exit
+fi
+
+# If -warn mode was requested, produce the output and then exit:
+if [ "$MODE" = "warn" ]; then
+ while [ -f "$1" ]; do
+ mkdir -p $TMP/scan${MCOOKIE}
+ # Determine extension:
+ packageext="$( echo $1 | rev | cut -f 1 -d . | rev)"
+ # Determine decompressor utility:
+ case $packageext in
+ 'tgz' )
+ packagecompression=gzip
+ ;;
+ 'tbz' )
+ if which lbzip2 1> /dev/null 2> /dev/null ; then
+ packagecompression=lbzip2
+ else
+ packagecompression=bzip2
+ fi
+ ;;
+ 'tlz' )
+ if which plzip 1> /dev/null 2> /dev/null ; then
+ packagecompression="plzip --threads=${THREADS}"
+ elif which lzip 1> /dev/null 2> /dev/null ; then
+ packagecompression=lzip
+ else
+ echo "ERROR: lzip compression utility not found in \$PATH."
+ exit 3
+ fi
+ ;;
+ 'txz' )
+ if [ ! "$XZ_THREADS_FORCED" = "yes" ]; then
+ packagecompression="xz --threads=${THREADS}"
+ else
+ packagecompression="xz --threads=2"
+ fi
+ ;;
+ esac
+ ( cd $TMP/scan${MCOOKIE} ; $packagecompression -dc | tar xf - install ) < $1 2> /dev/null
+ if [ -r $TMP/scan${MCOOKIE}/install/doinst.sh ]; then
+ if grep ' rm -rf ' $TMP/scan${MCOOKIE}/install/doinst.sh 1>/dev/null 2>/dev/null ; then
+ grep ' rm -rf ' $TMP/scan${MCOOKIE}/install/doinst.sh > $TMP/scan${MCOOKIE}/install/delete
+ for f in `cat $TMP/scan${MCOOKIE}/install/delete | cut -f 3,7 -d ' ' | tr ' ' '/'`; do
+ f="/$f"
+ if [ -f "$f" -o -L "$f" ]; then
+ echo "$f"
+ fi
+ done
+ fi
+ if [ -d $TMP/scan${MCOOKIE} ]; then
+ ( cd $TMP/scan${MCOOKIE} ; rm -rf install ) 2> /dev/null
+ ( cd $TMP ; rmdir scan${MCOOKIE} ) 2> /dev/null
+ fi
+ fi
+ for f in `( $packagecompression -dc | tar tf - ) < $1 | grep -v 'drwx'`; do
+ f="/$f"
+ if [ -f "$f" -o -L "$f" ]; then
+ echo "$f"
+ fi
+ done
+ shift 1
+ done
+ exit
+fi
+
+# Main loop:
+for package in $* ; do
+
+ # Simple package integrity check:
+ if [ ! -f $package ]; then
+ EXITSTATUS=4
+ if [ "$MODE" = "install" ]; then
+ echo "Cannot install $package: file not found"
+ fi
+ continue;
+ fi
+
+ # "shortname" isn't really THAT short...
+ # it's just the full name without ".t{gz,bz,lz,xz}"
+ shortname="$(pkgbase $package)"
+ packagedir="$(dirname $package)"
+ # This is the base package name, used for grepping tagfiles and descriptions:
+ packagebase="$(package_name $shortname)"
+
+ # Reject package if it does not end in '.t{gz,bz,lz,xz}':
+ if [ "$shortname" = "$(basename $package)" ]; then
+ EXITSTATUS=3
+ if [ "$MODE" = "install" ]; then
+ echo "Cannot install $package: file does not end in .tgz, .tbz, .tlz, or .txz"
+ fi
+ continue;
+ fi
+
+ # Determine extension:
+ packageext="$(echo $package | rev | cut -f 1 -d . | rev)"
+
+ # Determine compressor utility:
+ case $packageext in
+ 'tgz' )
+ packagecompression=gzip
+ ;;
+ 'tbz' )
+ if which lbzip2 1> /dev/null 2> /dev/null ; then
+ packagecompression=lbzip2
+ else
+ packagecompression=bzip2
+ fi
+ ;;
+ 'tlz' )
+ if which plzip 1> /dev/null 2> /dev/null ; then
+ packagecompression="plzip --threads=${THREADS}"
+ elif which lzip 1> /dev/null 2> /dev/null ; then
+ packagecompression=lzip
+ else
+ echo "ERROR: lzip compression utility not found in \$PATH."
+ exit 3
+ fi
+ ;;
+ 'txz' )
+ if [ ! "$XZ_THREADS_FORCED" = "yes" ]; then
+ packagecompression="xz --threads=${THREADS}"
+ else
+ packagecompression="xz --threads=2"
+ fi
+ ;;
+ esac
+
+ # Test presence of external compression utility:
+ if ! $(echo $packagecompression | cut -f 1 -d ' ') --help 1> /dev/null 2> /dev/null ; then
+ EXITSTATUS=5
+ if [ "$MODE" = "install" ]; then
+ echo "Cannot install $package: external compression utility $packagecompression missing"
+ fi
+ continue;
+ fi
+
+ # Determine package's priority:
+ unset PRIORITY
+ if [ "$USERTAGFILE" = "" ]; then
+ TAGFILE="$packagedir/tagfile"
+ else
+ TAGFILE="$USERTAGFILE"
+ fi
+ if [ ! -r "$TAGFILE" ]; then
+ TAGFILE=/dev/null
+ fi
+ if grep "^$packagebase:" "$TAGFILE" | grep ADD > /dev/null 2> /dev/null ; then
+ PRIORITY="ADD"
+ elif grep "^$packagebase:" "$TAGFILE" | grep REC > /dev/null 2> /dev/null ; then
+ PRIORITY="REC"
+ elif grep "^$packagebase:" "$TAGFILE" | grep OPT > /dev/null 2> /dev/null ; then
+ PRIORITY="OPT"
+ elif grep "^$packagebase:" "$TAGFILE" | grep SKP > /dev/null 2> /dev/null ; then
+ PRIORITY="SKP"
+ fi
+ if [ "$PRIORITY" = "ADD" ]; then
+ PMSG="[ADD]"
+ elif [ "$PRIORITY" = "REC" ]; then
+ PMSG="[REC]"
+ elif [ "$PRIORITY" = "OPT" ]; then
+ PMSG="[OPT]"
+ elif [ "$PRIORITY" = "SKP" ]; then
+ PMSG="[SKP]"
+ else
+ PMSG=""
+ fi
+
+ # If a tagfile wants this package to be skipped, do that now before
+ # wasting any more CPU on it:
+ if [ "$PRIORITY" = "SKP" -a ! "$ALWAYSASK" = "yes" ]; then
+ continue # next package
+ fi
+
+ # Figure out some package information, like the compressed and uncompressed
+ # sizes, and where to find the package description:
+ COMPRESSED="$(/bin/du -sh "$(readlink -f $package)" | cut -f 1)"
+ DESCRIPTION=""
+ # First check for .txt file next to the package, since this is faster:
+ if grep "^$packagebase:" "$packagedir/$shortname.txt" 1> /dev/null 2> /dev/null ; then
+ DESCRIPTION="$packagedir/$shortname.txt"
+ elif grep "^$shortname:" "$packagedir/$shortname.txt" 1> /dev/null 2> /dev/null ; then
+ DESCRIPTION="$packagedir/$shortname.txt"
+ fi
+
+ # Test tarball integrity and get uncompressed package size:
+ if [ "$MODE" = "install" ]; then
+ echo "Verifying package $(basename $package)."
+ fi
+ # The stray cat reduces the frequency of the lack of reported size.
+ # If it still fails, we hit it with a bigger hammer down below.
+ cat $package | $packagecompression -dc | LC_ALL=C dd 2> $TMP/tmpsize${MCOOKIE} | cat | tar tf - 2> /dev/null 1> $TMP/tmplist${MCOOKIE}
+ TARERROR=$?
+ if [ ! "$TARERROR" = "0" ]; then
+ EXITSTATUS=1 # tar file corrupt
+ if [ "$MODE" = "install" ]; then
+ echo "Unable to install $package: tar archive is corrupt (tar returned error code $TARERROR)"
+ fi
+ rm -f $TMP/tmplist${MCOOKIE} $TMP/tmpsize${MCOOKIE}
+ continue
+ fi
+ UNCOMPRESSED="$(cat $TMP/tmpsize${MCOOKIE} | tail -n 1 | cut -f 1 -d ' ' | numfmt --to=iec)"
+ # Weird bug "fix". Sometimes we get no uncompressed size (this started when we
+ # moved away from tar-1.13, but I don't see what that could have to do with
+ # it). So, if we have no uncompressed size here, demand it in this loop.
+ # Hopefully the bug is not weird enough to make this an infinite loop. :/
+ while [ "$UNCOMPRESSED" = "" ]; do
+ cat $package | $packagecompression -dc | LC_ALL=C dd 1> /dev/null 2> $TMP/tmpsize${MCOOKIE}
+ UNCOMPRESSED="$(cat $TMP/tmpsize${MCOOKIE} | tail -n 1 | cut -f 1 -d ' ' | numfmt --to=iec)"
+ done
+ rm -f $TMP/tmpsize${MCOOKIE}
+
+ # If we still don't have a package description, look inside the package.
+ # This requires a costly untar.
+ if [ "$DESCRIPTION" = "" ]; then
+ mkdir -p $TMP/scan${MCOOKIE}
+ ( cd $TMP/scan${MCOOKIE} ; $packagecompression -dc | tar xf - install ) < $package 2> /dev/null
+ if grep "^$packagebase:" "$TMP/scan${MCOOKIE}/install/slack-desc" 1> /dev/null 2> /dev/null ; then
+ DESCRIPTION="$TMP/scan${MCOOKIE}/install/slack-desc"
+ elif grep "^$shortname:" "$TMP/scan${MCOOKIE}/install/slack-desc" 1> /dev/null 2> /dev/null ; then
+ DESCRIPTION="$TMP/scan${MCOOKIE}/install/slack-desc"
+ fi
+ fi
+
+ if [ "$DESCRIPTION" = "" ]; then
+ #echo "WARNING NO SLACK-DESC"
+ DESCRIPTION="/dev/null"
+ fi
+
+ # Gather package infomation into a temporary file:
+ grep "^$packagebase:" $DESCRIPTION | cut -f 2- -d : | cut -b2- 1> $TMP/tmpmsg${MCOOKIE} 2> /dev/null
+ if [ "$shortname" != "$packagebase" ]; then
+ grep "^$shortname:" $DESCRIPTION | cut -f 2- -d : | cut -b2- 1>> $TMP/tmpmsg${MCOOKIE} 2> /dev/null
+ fi
+ # Adjust the length here. This allows a slack-desc to be any size up to 13 lines instead of fixed at 11.
+ LENGTH=$(wc -l < $TMP/tmpmsg${MCOOKIE} )
+ while [ $LENGTH -lt 12 ]; do
+ echo >> $TMP/tmpmsg${MCOOKIE}
+ LENGTH=$(expr $LENGTH + 1)
+ done
+ echo "Size: Compressed: ${COMPRESSED}, uncompressed: ${UNCOMPRESSED}." >> $TMP/tmpmsg${MCOOKIE}
+ # For recent versions of dialog it is necessary to add \n to the end of each line
+ # or it will remove repeating spaces and mess up our careful formatting:
+ cat << EOF > $TMP/controlns${MCOOKIE}
+\n
+\n
+\n
+\n
+\n
+\n
+\n
+\n
+\n
+\n
+\n
+\n
+\n
+EOF
+ paste -d "" $TMP/tmpmsg${MCOOKIE} $TMP/controlns${MCOOKIE} > $TMP/pasted${MCOOKIE}
+ rm -f $TMP/controlns${MCOOKIE}
+ mv $TMP/pasted${MCOOKIE} $TMP/tmpmsg${MCOOKIE}
+ # Emit information to the console:
+ if [ "$MODE" = "install" ]; then
+ if [ "$PMSG" = "" ]; then
+ echo "Installing package $(basename $package):"
+ else
+ echo "Installing package $(basename $package) $PMSG:"
+ fi
+ echo "PACKAGE DESCRIPTION:"
+ grep "^$packagebase:" $DESCRIPTION | uniq | sed "s/^$packagebase:/#/g"
+ if [ "$shortname" != "$packagebase" ]; then
+ grep "^$shortname:" $DESCRIPTION | uniq | sed "s/^$shortname:/#/g"
+ fi
+ elif [ "$MODE" = "terse" ]; then # emit a single description line
+ ( flock 9 || exit 11
+ printf "%-$(expr $TERSELENGTH - 7)s %-6s\n" "$(echo $shortname: $(echo $(cat $DESCRIPTION | grep "^$packagebase:" | sed "s/^$packagebase: //g" | head -n 1 | tr -d '()' | sed "s/^$packagebase //g" ) $(echo " $(printf '.%.0s' {1..256})")) | cut -b1-$(expr $TERSELENGTH - 7))" "$(printf "[%4s]" $UNCOMPRESSED)" | cut -b 1-${TERSELENGTH}
+ ) 9> $INSTLOCKDIR/dialog.lock
+ elif [ "$MODE" = "infobox" ]; then # install infobox package
+ ( flock 9 || exit 11
+ dialog --title "Installing package $shortname $PMSG" --infobox "$(cat $TMP/tmpmsg${MCOOKIE})" 0 0
+ ) 9> $INSTLOCKDIR/dialog.lock
+ elif [ "$MODE" = "menu" -a "$PRIORITY" = "ADD" -a ! "$ALWAYSASK" = "yes" ]; then # ADD overrides menu mode unless -ask was used
+ ( flock 9 || exit 11
+ dialog --title "Installing package $shortname $PMSG" --infobox "$(cat $TMP/tmpmsg${MCOOKIE})" 0 0
+ ) 9> $INSTLOCKDIR/dialog.lock
+ elif [ "$MODE" = "menu" -a "$USERPRIORITY" = "ADD" ]; then # install no matter what $PRIORITY
+ ( flock 9 || exit 11
+ dialog --title "Installing package $shortname $PMSG" --infobox "$(cat $TMP/tmpmsg${MCOOKIE})" 0 0
+ ) 9> $INSTLOCKDIR/dialog.lock
+ else # we must need a full menu:
+ ( flock 9 || exit 11
+ dialog --title "Package Name: $shortname $PMSG" --menu "$(cat $TMP/tmpmsg${MCOOKIE})" 0 0 3 \
+ "Yes" "Install package $shortname" \
+ "No" "Do not install package $shortname" \
+ "Quit" "Abort software installation completely" 2> $TMP/reply${MCOOKIE}
+ if [ ! $? = 0 ]; then
+ echo "No" > $TMP/reply${MCOOKIE}
+ fi
+ ) 9> $INSTLOCKDIR/dialog.lock
+ REPLY="$(cat $TMP/reply${MCOOKIE})"
+ rm -f $TMP/reply${MCOOKIE} $TMP/tmpmsg${MCOOKIE}
+ if [ "$REPLY" = "Quit" ]; then
+ exit 99 # EXIT STATUS 99 = ABORT!
+ elif [ "$REPLY" = "No" ]; then
+ continue # skip the package
+ fi
+ fi
+
+ # Make sure there are no symbolic links sitting in the way of
+ # incoming package files:
+ grep -v "/$" $TMP/tmplist${MCOOKIE} | while read file ; do
+ if [ -L "$ROOT/$file" ]; then
+ rm -f "$ROOT/$file"
+ fi
+ done
+ rm -f $TMP/tmplist${MCOOKIE}
+
+ # Write the package file database entry and install the package:
+ echo "PACKAGE NAME: $shortname" > $ADM_DIR/packages/$shortname
+ echo "COMPRESSED PACKAGE SIZE: $COMPRESSED" >> $ADM_DIR/packages/$shortname
+ echo "UNCOMPRESSED PACKAGE SIZE: $UNCOMPRESSED" >> $ADM_DIR/packages/$shortname
+ echo "PACKAGE LOCATION: $package" >> $ADM_DIR/packages/$shortname
+ # Record the md5sum if that's a selected option:
+ if [ $MD5SUM = 1 ]; then
+ echo "PACKAGE MD5SUM: $(md5sum $package | cut -f 1 -d ' ')" >> $ADM_DIR/packages/$shortname
+ fi
+ echo "PACKAGE DESCRIPTION:" >> $ADM_DIR/packages/$shortname
+ grep "^$packagebase:" $DESCRIPTION >> $ADM_DIR/packages/$shortname 2> /dev/null
+ if [ "$shortname" != "$packagebase" ]; then
+ grep "^$shortname:" $DESCRIPTION >> $ADM_DIR/packages/$shortname 2> /dev/null
+ fi
+ echo "FILE LIST:" >> $ADM_DIR/packages/$shortname
+ if [ "$INSTDIR" = "install" ]; then
+ ( cd $ROOT/ ; $packagecompression -dc | tar --acls --xattrs --xattrs-include='*' --keep-directory-symlink -xpvf - | LC_ALL=C sort ) < $package >> $TMP/$shortname 2> /dev/null
+ else
+ ( cd $ROOT/ ; $packagecompression -dc | tar --transform "s,^install$,$INSTDIR," --transform "s,^install/,$INSTDIR/," --acls --xattrs --xattrs-include='*' --keep-directory-symlink -xpvf - | LC_ALL=C sort ) < $package >> $TMP/$shortname 2> /dev/null
+ fi
+ if [ "$( grep '^\./' $TMP/$shortname | wc -l | tr -d ' ')" = "1" ]; then
+ # Good. We have a package that meets the Slackware spec.
+ cat $TMP/$shortname >> $ADM_DIR/packages/$shortname
+ else
+ # Some dumb bunny built a package with something other than makepkg. Bad!
+ # Oh well. Bound to happen. Par for the course. Fix it and move on...
+ # We'll assume it's just a recent tar with an unfiltered filelist with all
+ # files prefixed with "./". No guarantees, but this will usually work.
+ cat $TMP/$shortname | sed '2,$s,^\./,,' >> $ADM_DIR/packages/$shortname
+ fi
+ rm -f $TMP/$shortname
+
+ # It's a good idea to make sure those newly installed libraries are properly
+ # activated for use, unless ROOT is pointing somewhere else in which case
+ # running ldconfig on the host system won't make any difference:
+ if [ "$ROOT" = "" ] && [ -x /sbin/ldconfig ]; then
+ ( flock 9 || exit 11
+ /sbin/ldconfig 2> /dev/null
+ ) 9> $INSTLOCKDIR/ldconfig.lock
+ fi
+
+ if [ -f $ROOT/$INSTDIR/doinst.sh ]; then
+ if [ "$MODE" = "install" ]; then
+ echo "Executing install script for $(basename $package)."
+ fi
+ # Don't use locking if the script contains "NOLOCK":
+ if grep -q NOLOCK $ROOT/$INSTDIR/doinst.sh ; then
+ # If bash is available, use sed to convert the install script to use pushd/popd
+ # rather than spawning subshells which is slow on ARM. This will also speed up
+ # install script processing on any platform.
+ if [ -x /bin/bash ]; then
+ cd $ROOT/ ; sed -e's?^( cd \([^;]*\);\(.*\) )$?pushd \1 \&\> /dev/null ; \2 ; popd \&\> /dev/null?g ' $INSTDIR/doinst.sh | /bin/bash
+ else
+ cd $ROOT/ ; sh $INSTDIR/doinst.sh
+ fi
+ else # use locking
+ # If bash is available, use sed to convert the install script to use pushd/popd
+ # rather than spawning subshells which is slow on ARM. This will also speed up
+ # install script processing on any platform.
+ if [ -x /bin/bash ]; then
+ ( flock 9 || exit 11
+ cd $ROOT/ ; sed -e's?^( cd \([^;]*\);\(.*\) )$?pushd \1 \&\> /dev/null ; \2 ; popd \&\> /dev/null?g ' $INSTDIR/doinst.sh | /bin/bash
+ ) 9> $INSTLOCKDIR/doinst.sh.lock
+ else
+ ( flock 9 || exit 11
+ cd $ROOT/ ; sh $INSTDIR/doinst.sh
+ ) 9> $INSTLOCKDIR/doinst.sh.lock
+ fi
+ fi
+ fi
+ # Clean up the mess...
+ if [ -d $ROOT/$INSTDIR ]; then
+ if [ -r $ROOT/$INSTDIR/doinst.sh ]; then
+ cp $ROOT/$INSTDIR/doinst.sh $ADM_DIR/scripts/$shortname
+ chmod 755 $ADM_DIR/scripts/$shortname
+ fi
+ # /install/doinst.sh and /install/slack-* are reserved locations for the package system.
+ # Heh, not any more with a recent tar :-)
+ ( cd $ROOT/$INSTDIR ; rm -f doinst.sh slack-* 1> /dev/null 2>&1 )
+ rmdir $ROOT/$INSTDIR 1> /dev/null 2>&1
+ fi
+ # If we used a scan directory, get rid of it:
+ if [ -d "$TMP/scan${MCOOKIE}" ]; then
+ rm -rf "$TMP/scan${MCOOKIE}"
+ fi
+ rm -f $TMP/tmpmsg${MCOOKIE} $TMP/reply${MCOOKIE}
+ if [ "$MODE" = "install" ]; then
+ echo "Package $(basename $package) installed."
+ fi
+done
+
+exit $EXITSTATUS