summaryrefslogtreecommitdiff
path: root/source/n/wpa_supplicant/config/dot.config
diff options
context:
space:
mode:
Diffstat (limited to 'source/n/wpa_supplicant/config/dot.config')
-rw-r--r--source/n/wpa_supplicant/config/dot.config615
1 files changed, 32 insertions, 583 deletions
diff --git a/source/n/wpa_supplicant/config/dot.config b/source/n/wpa_supplicant/config/dot.config
index bcc9f056..1c7f67df 100644
--- a/source/n/wpa_supplicant/config/dot.config
+++ b/source/n/wpa_supplicant/config/dot.config
@@ -1,595 +1,44 @@
-# Example wpa_supplicant build time configuration
-#
-# This file lists the configuration options that are used when building the
-# wpa_supplicant binary. All lines starting with # are ignored. Configuration
-# option lines must be commented out complete, if they are not to be included,
-# i.e., just setting VARIABLE=n is not disabling that variable.
-#
-# This file is included in Makefile, so variables like CFLAGS and LIBS can also
-# be modified from here. In most cases, these lines should use += in order not
-# to override previous values of the variables.
-
-
-# Uncomment following two lines and fix the paths if you have installed OpenSSL
-# or GnuTLS in non-default location
-#CFLAGS += -I/usr/local/openssl/include
-#LIBS += -L/usr/local/openssl/lib
-
-# Some Red Hat versions seem to include kerberos header files from OpenSSL, but
-# the kerberos files are not in the default include path. Following line can be
-# used to fix build issues on such systems (krb5.h not found).
-#CFLAGS += -I/usr/include/kerberos
-
-# Driver interface for generic Linux wireless extensions
-# Note: WEXT is deprecated in the current Linux kernel version and no new
-# functionality is added to it. nl80211-based interface is the new
-# replacement for WEXT and its use allows wpa_supplicant to properly control
-# the driver to improve existing functionality like roaming and to support new
-# functionality.
-CONFIG_DRIVER_WEXT=y
-
-# Driver interface for Linux drivers using the nl80211 kernel interface
+CONFIG_AP=y
+CONFIG_BACKEND=file
+CONFIG_BGSCAN_SIMPLE=y
+CONFIG_CTRL_IFACE=y
+CONFIG_CTRL_IFACE_DBUS=y
+CONFIG_CTRL_IFACE_DBUS_INTRO=y
+CONFIG_CTRL_IFACE_DBUS_NEW=y
+CONFIG_DEBUG_FILE=y
+CONFIG_DEBUG_SYSLOG=y
CONFIG_DRIVER_NL80211=y
-
-# QCA vendor extensions to nl80211
-#CONFIG_DRIVER_NL80211_QCA=y
-
-# driver_nl80211.c requires libnl. If you are compiling it yourself
-# you may need to point hostapd to your version of libnl.
-#
-#CFLAGS += -I$<path to libnl include files>
-#LIBS += -L$<path to libnl library files>
-
-# Use libnl v2.0 (or 3.0) libraries.
-#CONFIG_LIBNL20=y
-
-# Use libnl 3.2 libraries (if this is selected, CONFIG_LIBNL20 is ignored)
-CONFIG_LIBNL32=y
-
-
-# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
-#CONFIG_DRIVER_BSD=y
-#CFLAGS += -I/usr/local/include
-#LIBS += -L/usr/local/lib
-#LIBS_p += -L/usr/local/lib
-#LIBS_c += -L/usr/local/lib
-
-# Driver interface for Windows NDIS
-#CONFIG_DRIVER_NDIS=y
-#CFLAGS += -I/usr/include/w32api/ddk
-#LIBS += -L/usr/local/lib
-# For native build using mingw
-#CONFIG_NATIVE_WINDOWS=y
-# Additional directories for cross-compilation on Linux host for mingw target
-#CFLAGS += -I/opt/mingw/mingw32/include/ddk
-#LIBS += -L/opt/mingw/mingw32/lib
-#CC=mingw32-gcc
-# By default, driver_ndis uses WinPcap for low-level operations. This can be
-# replaced with the following option which replaces WinPcap calls with NDISUIO.
-# However, this requires that WZC is disabled (net stop wzcsvc) before starting
-# wpa_supplicant.
-# CONFIG_USE_NDISUIO=y
-
-# Driver interface for wired Ethernet drivers
+CONFIG_DRIVER_WEXT=y
CONFIG_DRIVER_WIRED=y
-
-# Driver interface for MACsec capable Qualcomm Atheros drivers
-#CONFIG_DRIVER_MACSEC_QCA=y
-
-# Driver interface for Linux MACsec drivers
-#CONFIG_DRIVER_MACSEC_LINUX=y
-
-# Driver interface for the Broadcom RoboSwitch family
-#CONFIG_DRIVER_ROBOSWITCH=y
-
-# Driver interface for no driver (e.g., WPS ER only)
-#CONFIG_DRIVER_NONE=y
-
-# Solaris libraries
-#LIBS += -lsocket -ldlpi -lnsl
-#LIBS_c += -lsocket
-
-# Enable IEEE 802.1X Supplicant (automatically included if any EAP method or
-# MACsec is included)
-CONFIG_IEEE8021X_EAPOL=y
-
-# EAP-MD5
-CONFIG_EAP_MD5=y
-
-# EAP-MSCHAPv2
-CONFIG_EAP_MSCHAPV2=y
-
-# EAP-TLS
-CONFIG_EAP_TLS=y
-
-# EAL-PEAP
-CONFIG_EAP_PEAP=y
-
-# EAP-TTLS
-CONFIG_EAP_TTLS=y
-
-# EAP-FAST
-# Note: If OpenSSL is used as the TLS library, OpenSSL 1.0 or newer is needed
-# for EAP-FAST support. Older OpenSSL releases would need to be patched, e.g.,
-# with openssl-0.9.8x-tls-extensions.patch, to add the needed functions.
+CONFIG_EAP_AKA=y
CONFIG_EAP_FAST=y
-
-# EAP-GTC
+CONFIG_EAP_GPSK=y
+CONFIG_EAP_GPSK_SHA256=y
CONFIG_EAP_GTC=y
-
-# EAP-OTP
+CONFIG_EAP_IKEV2=y
+CONFIG_EAP_LEAP=y
+CONFIG_EAP_MD5=y
+CONFIG_EAP_MSCHAPV2=y
CONFIG_EAP_OTP=y
-
-# EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used)
-#CONFIG_EAP_SIM=y
-
-# EAP-PSK (experimental; this is _not_ needed for WPA-PSK)
-#CONFIG_EAP_PSK=y
-
-# EAP-pwd (secure authentication using only a password)
-#CONFIG_EAP_PWD=y
-
-# EAP-PAX
CONFIG_EAP_PAX=y
-
-# LEAP
-CONFIG_EAP_LEAP=y
-
-# EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used)
-#CONFIG_EAP_AKA=y
-
-# EAP-AKA' (enable CONFIG_PCSC, if EAP-AKA' is used).
-# This requires CONFIG_EAP_AKA to be enabled, too.
-#CONFIG_EAP_AKA_PRIME=y
-
-# Enable USIM simulator (Milenage) for EAP-AKA
-#CONFIG_USIM_SIMULATOR=y
-
-# EAP-SAKE
+CONFIG_EAP_PEAP=y
CONFIG_EAP_SAKE=y
-
-# EAP-GPSK
-CONFIG_EAP_GPSK=y
-# Include support for optional SHA256 cipher suite in EAP-GPSK
-CONFIG_EAP_GPSK_SHA256=y
-
-# EAP-TNC and related Trusted Network Connect support (experimental)
+CONFIG_EAP_TLS=y
CONFIG_EAP_TNC=y
-
-# Wi-Fi Protected Setup (WPS)
-CONFIG_WPS=y
-# Enable WPS external registrar functionality
-#CONFIG_WPS_ER=y
-# Disable credentials for an open network by default when acting as a WPS
-# registrar.
-#CONFIG_WPS_REG_DISABLE_OPEN=y
-# Enable WPS support with NFC config method
-#CONFIG_WPS_NFC=y
-
-# EAP-IKEv2
-CONFIG_EAP_IKEV2=y
-
-# EAP-EKE
-#CONFIG_EAP_EKE=y
-
-# MACsec
-#CONFIG_MACSEC=y
-
-# PKCS#12 (PFX) support (used to read private key and certificate file from
-# a file that usually has extension .p12 or .pfx)
+CONFIG_EAP_TTLS=y
+CONFIG_IBSS_RSN=y
+CONFIG_IEEE80211N=y
+CONFIG_IEEE80211R=y
+CONFIG_IEEE80211W=y
+CONFIG_IEEE8021X_EAPOL=y
+CONFIG_LIBNL32=y
+CONFIG_P2P=y
+CONFIG_PEERKEY=y
CONFIG_PKCS12=y
-
-# Smartcard support (i.e., private key on a smartcard), e.g., with openssl
-# engine.
-CONFIG_SMARTCARD=y
-
-# PC/SC interface for smartcards (USIM, GSM SIM)
-# Enable this if EAP-SIM or EAP-AKA is included
-#CONFIG_PCSC=y
-
-# Support HT overrides (disable HT/HT40, mask MCS rates, etc.)
-#CONFIG_HT_OVERRIDES=y
-
-# Support VHT overrides (disable VHT, mask MCS rates, etc.)
-#CONFIG_VHT_OVERRIDES=y
-
-# Development testing
-#CONFIG_EAPOL_TEST=y
-
-# Select control interface backend for external programs, e.g, wpa_cli:
-# unix = UNIX domain sockets (default for Linux/*BSD)
-# udp = UDP sockets using localhost (127.0.0.1)
-# udp6 = UDP IPv6 sockets using localhost (::1)
-# named_pipe = Windows Named Pipe (default for Windows)
-# udp-remote = UDP sockets with remote access (only for tests systems/purpose)
-# udp6-remote = UDP IPv6 sockets with remote access (only for tests purpose)
-# y = use default (backwards compatibility)
-# If this option is commented out, control interface is not included in the
-# build.
-CONFIG_CTRL_IFACE=y
-
-# Include support for GNU Readline and History Libraries in wpa_cli.
-# When building a wpa_cli binary for distribution, please note that these
-# libraries are licensed under GPL and as such, BSD license may not apply for
-# the resulting binary.
CONFIG_READLINE=y
-
-# Include internal line edit mode in wpa_cli. This can be used as a replacement
-# for GNU Readline to provide limited command line editing and history support.
-#CONFIG_WPA_CLI_EDIT=y
-
-# Remove debugging code that is printing out debug message to stdout.
-# This can be used to reduce the size of the wpa_supplicant considerably
-# if debugging code is not needed. The size reduction can be around 35%
-# (e.g., 90 kB).
-#CONFIG_NO_STDOUT_DEBUG=y
-
-# Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save
-# 35-50 kB in code size.
-#CONFIG_NO_WPA=y
-
-# Remove IEEE 802.11i/WPA-Personal ASCII passphrase support
-# This option can be used to reduce code size by removing support for
-# converting ASCII passphrases into PSK. If this functionality is removed, the
-# PSK can only be configured as the 64-octet hexstring (e.g., from
-# wpa_passphrase). This saves about 0.5 kB in code size.
-#CONFIG_NO_WPA_PASSPHRASE=y
-
-# Disable scan result processing (ap_mode=1) to save code size by about 1 kB.
-# This can be used if ap_scan=1 mode is never enabled.
-#CONFIG_NO_SCAN_PROCESSING=y
-
-# Select configuration backend:
-# file = text file (e.g., wpa_supplicant.conf; note: the configuration file
-# path is given on command line, not here; this option is just used to
-# select the backend that allows configuration files to be used)
-# winreg = Windows registry (see win_example.reg for an example)
-CONFIG_BACKEND=file
-
-# Remove configuration write functionality (i.e., to allow the configuration
-# file to be updated based on runtime configuration changes). The runtime
-# configuration can still be changed, the changes are just not going to be
-# persistent over restarts. This option can be used to reduce code size by
-# about 3.5 kB.
-#CONFIG_NO_CONFIG_WRITE=y
-
-# Remove support for configuration blobs to reduce code size by about 1.5 kB.
-#CONFIG_NO_CONFIG_BLOBS=y
-
-# Select program entry point implementation:
-# main = UNIX/POSIX like main() function (default)
-# main_winsvc = Windows service (read parameters from registry)
-# main_none = Very basic example (development use only)
-#CONFIG_MAIN=main
-
-# Select wrapper for operating system and C library specific functions
-# unix = UNIX/POSIX like systems (default)
-# win32 = Windows systems
-# none = Empty template
-#CONFIG_OS=unix
-
-# Select event loop implementation
-# eloop = select() loop (default)
-# eloop_win = Windows events and WaitForMultipleObject() loop
-#CONFIG_ELOOP=eloop
-
-# Should we use poll instead of select? Select is used by default.
-#CONFIG_ELOOP_POLL=y
-
-# Should we use epoll instead of select? Select is used by default.
-#CONFIG_ELOOP_EPOLL=y
-
-# Should we use kqueue instead of select? Select is used by default.
-#CONFIG_ELOOP_KQUEUE=y
-
-# Select layer 2 packet implementation
-# linux = Linux packet socket (default)
-# pcap = libpcap/libdnet/WinPcap
-# freebsd = FreeBSD libpcap
-# winpcap = WinPcap with receive thread
-# ndis = Windows NDISUIO (note: requires CONFIG_USE_NDISUIO=y)
-# none = Empty template
-#CONFIG_L2_PACKET=linux
-
-# Disable Linux packet socket workaround applicable for station interface
-# in a bridge for EAPOL frames. This should be uncommented only if the kernel
-# is known to not have the regression issue in packet socket behavior with
-# bridge interfaces (commit 'bridge: respect RFC2863 operational state')').
-#CONFIG_NO_LINUX_PACKET_SOCKET_WAR=y
-
-# IEEE 802.11w (management frame protection), also known as PMF
-# Driver support is also needed for IEEE 802.11w.
-CONFIG_IEEE80211W=y
-
-# Select TLS implementation
-# openssl = OpenSSL (default)
-# gnutls = GnuTLS
-# internal = Internal TLSv1 implementation (experimental)
-# linux = Linux kernel AF_ALG and internal TLSv1 implementation (experimental)
-# none = Empty template
-#CONFIG_TLS=openssl
-
-# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.1)
-# can be enabled to get a stronger construction of messages when block ciphers
-# are used. It should be noted that some existing TLS v1.0 -based
-# implementation may not be compatible with TLS v1.1 message (ClientHello is
-# sent prior to negotiating which version will be used)
-#CONFIG_TLSV11=y
-
-# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.2)
-# can be enabled to enable use of stronger crypto algorithms. It should be
-# noted that some existing TLS v1.0 -based implementation may not be compatible
-# with TLS v1.2 message (ClientHello is sent prior to negotiating which version
-# will be used)
-#CONFIG_TLSV12=y
-
-# Select which ciphers to use by default with OpenSSL if the user does not
-# specify them.
+CONFIG_SMARTCARD=y
CONFIG_TLS_DEFAULT_CIPHERS="PROFILE=SYSTEM:3DES"
-
-# If CONFIG_TLS=internal is used, additional library and include paths are
-# needed for LibTomMath. Alternatively, an integrated, minimal version of
-# LibTomMath can be used. See beginning of libtommath.c for details on benefits
-# and drawbacks of this option.
-#CONFIG_INTERNAL_LIBTOMMATH=y
-#ifndef CONFIG_INTERNAL_LIBTOMMATH
-#LTM_PATH=/usr/src/libtommath-0.39
-#CFLAGS += -I$(LTM_PATH)
-#LIBS += -L$(LTM_PATH)
-#LIBS_p += -L$(LTM_PATH)
-#endif
-# At the cost of about 4 kB of additional binary size, the internal LibTomMath
-# can be configured to include faster routines for exptmod, sqr, and div to
-# speed up DH and RSA calculation considerably
-#CONFIG_INTERNAL_LIBTOMMATH_FAST=y
-
-# Include NDIS event processing through WMI into wpa_supplicant/wpasvc.
-# This is only for Windows builds and requires WMI-related header files and
-# WbemUuid.Lib from Platform SDK even when building with MinGW.
-#CONFIG_NDIS_EVENTS_INTEGRATED=y
-#PLATFORMSDKLIB="/opt/Program Files/Microsoft Platform SDK/Lib"
-
-# Add support for old DBus control interface
-# (fi.epitest.hostap.WPASupplicant)
-CONFIG_CTRL_IFACE_DBUS=y
-
-# Add support for new DBus control interface
-# (fi.w1.hostap.wpa_supplicant1)
-CONFIG_CTRL_IFACE_DBUS_NEW=y
-
-# Add introspection support for new DBus control interface
-CONFIG_CTRL_IFACE_DBUS_INTRO=y
-
-# Add support for loading EAP methods dynamically as shared libraries.
-# When this option is enabled, each EAP method can be either included
-# statically (CONFIG_EAP_<method>=y) or dynamically (CONFIG_EAP_<method>=dyn).
-# Dynamic EAP methods are build as shared objects (eap_*.so) and they need to
-# be loaded in the beginning of the wpa_supplicant configuration file
-# (see load_dynamic_eap parameter in the example file) before being used in
-# the network blocks.
-#
-# Note that some shared parts of EAP methods are included in the main program
-# and in order to be able to use dynamic EAP methods using these parts, the
-# main program must have been build with the EAP method enabled (=y or =dyn).
-# This means that EAP-TLS/PEAP/TTLS/FAST cannot be added as dynamic libraries
-# unless at least one of them was included in the main build to force inclusion
-# of the shared code. Similarly, at least one of EAP-SIM/AKA must be included
-# in the main build to be able to load these methods dynamically.
-#
-# Please also note that using dynamic libraries will increase the total binary
-# size. Thus, it may not be the best option for targets that have limited
-# amount of memory/flash.
-#CONFIG_DYNAMIC_EAP_METHODS=y
-
-# IEEE Std 802.11r-2008 (Fast BSS Transition) for station mode
-#CONFIG_IEEE80211R=y
-
-# Add support for writing debug log to a file (/tmp/wpa_supplicant-log-#.txt)
-CONFIG_DEBUG_FILE=y
-
-# Send debug messages to syslog instead of stdout
-CONFIG_DEBUG_SYSLOG=y
-# Set syslog facility for debug messages
-#CONFIG_DEBUG_SYSLOG_FACILITY=LOG_DAEMON
-
-# Add support for sending all debug messages (regardless of debug verbosity)
-# to the Linux kernel tracing facility. This helps debug the entire stack by
-# making it easy to record everything happening from the driver up into the
-# same file, e.g., using trace-cmd.
-#CONFIG_DEBUG_LINUX_TRACING=y
-
-# Add support for writing debug log to Android logcat instead of standard
-# output
-#CONFIG_ANDROID_LOG=y
-
-# Enable privilege separation (see README 'Privilege separation' for details)
-#CONFIG_PRIVSEP=y
-
-# Enable mitigation against certain attacks against TKIP by delaying Michael
-# MIC error reports by a random amount of time between 0 and 60 seconds
-#CONFIG_DELAYED_MIC_ERROR_REPORT=y
-
-# Enable tracing code for developer debugging
-# This tracks use of memory allocations and other registrations and reports
-# incorrect use with a backtrace of call (or allocation) location.
-#CONFIG_WPA_TRACE=y
-# For BSD, uncomment these.
-#LIBS += -lexecinfo
-#LIBS_p += -lexecinfo
-#LIBS_c += -lexecinfo
-
-# Use libbfd to get more details for developer debugging
-# This enables use of libbfd to get more detailed symbols for the backtraces
-# generated by CONFIG_WPA_TRACE=y.
-#CONFIG_WPA_TRACE_BFD=y
-# For BSD, uncomment these.
-#LIBS += -lbfd -liberty -lz
-#LIBS_p += -lbfd -liberty -lz
-#LIBS_c += -lbfd -liberty -lz
-
-# wpa_supplicant depends on strong random number generation being available
-# from the operating system. os_get_random() function is used to fetch random
-# data when needed, e.g., for key generation. On Linux and BSD systems, this
-# works by reading /dev/urandom. It should be noted that the OS entropy pool
-# needs to be properly initialized before wpa_supplicant is started. This is
-# important especially on embedded devices that do not have a hardware random
-# number generator and may by default start up with minimal entropy available
-# for random number generation.
-#
-# As a safety net, wpa_supplicant is by default trying to internally collect
-# additional entropy for generating random data to mix in with the data fetched
-# from the OS. This by itself is not considered to be very strong, but it may
-# help in cases where the system pool is not initialized properly. However, it
-# is very strongly recommended that the system pool is initialized with enough
-# entropy either by using hardware assisted random number generator or by
-# storing state over device reboots.
-#
-# wpa_supplicant can be configured to maintain its own entropy store over
-# restarts to enhance random number generation. This is not perfect, but it is
-# much more secure than using the same sequence of random numbers after every
-# reboot. This can be enabled with -e<entropy file> command line option. The
-# specified file needs to be readable and writable by wpa_supplicant.
-#
-# If the os_get_random() is known to provide strong random data (e.g., on
-# Linux/BSD, the board in question is known to have reliable source of random
-# data from /dev/urandom), the internal wpa_supplicant random pool can be
-# disabled. This will save some in binary size and CPU use. However, this
-# should only be considered for builds that are known to be used on devices
-# that meet the requirements described above.
-#CONFIG_NO_RANDOM_POOL=y
-
-# IEEE 802.11n (High Throughput) support (mainly for AP mode)
-CONFIG_IEEE80211N=y
-
-# IEEE 802.11ac (Very High Throughput) support (mainly for AP mode)
-# (depends on CONFIG_IEEE80211N)
-CONFIG_IEEE80211AC=y
-
-# Wireless Network Management (IEEE Std 802.11v-2011)
-# Note: This is experimental and not complete implementation.
-#CONFIG_WNM=y
-
-# Interworking (IEEE 802.11u)
-# This can be used to enable functionality to improve interworking with
-# external networks (GAS/ANQP to learn more about the networks and network
-# selection based on available credentials).
-#CONFIG_INTERWORKING=y
-
-# Hotspot 2.0
-#CONFIG_HS20=y
-
-# Enable interface matching in wpa_supplicant
-#CONFIG_MATCH_IFACE=y
-
-# Disable roaming in wpa_supplicant
-#CONFIG_NO_ROAMING=y
-
-# AP mode operations with wpa_supplicant
-# This can be used for controlling AP mode operations with wpa_supplicant. It
-# should be noted that this is mainly aimed at simple cases like
-# WPA2-Personal while more complex configurations like WPA2-Enterprise with an
-# external RADIUS server can be supported with hostapd.
-CONFIG_AP=y
-
-# P2P (Wi-Fi Direct)
-# This can be used to enable P2P support in wpa_supplicant. See README-P2P for
-# more information on P2P operations.
-CONFIG_P2P=y
-
-# Enable TDLS support
-#CONFIG_TDLS=y
-
-# Wi-Fi Direct
-# This can be used to enable Wi-Fi Direct extensions for P2P using an external
-# program to control the additional information exchanges in the messages.
CONFIG_WIFI_DISPLAY=y
-
-# Autoscan
-# This can be used to enable automatic scan support in wpa_supplicant.
-# See wpa_supplicant.conf for more information on autoscan usage.
-#
-# Enabling directly a module will enable autoscan support.
-# For exponential module:
-#CONFIG_AUTOSCAN_EXPONENTIAL=y
-# For periodic module:
-#CONFIG_AUTOSCAN_PERIODIC=y
-
-# Password (and passphrase, etc.) backend for external storage
-# These optional mechanisms can be used to add support for storing passwords
-# and other secrets in external (to wpa_supplicant) location. This allows, for
-# example, operating system specific key storage to be used
-#
-# External password backend for testing purposes (developer use)
-#CONFIG_EXT_PASSWORD_TEST=y
-
-# Enable Fast Session Transfer (FST)
-#CONFIG_FST=y
-
-# Enable CLI commands for FST testing
-#CONFIG_FST_TEST=y
-
-# OS X builds. This is only for building eapol_test.
-#CONFIG_OSX=y
-
-# Automatic Channel Selection
-# This will allow wpa_supplicant to pick the channel automatically when channel
-# is set to "0".
-#
-# TODO: Extend parser to be able to parse "channel=acs_survey" as an alternative
-# to "channel=0". This would enable us to eventually add other ACS algorithms in
-# similar way.
-#
-# Automatic selection is currently only done through initialization, later on
-# we hope to do background checks to keep us moving to more ideal channels as
-# time goes by. ACS is currently only supported through the nl80211 driver and
-# your driver must have survey dump capability that is filled by the driver
-# during scanning.
-#
-# TODO: In analogy to hostapd be able to customize the ACS survey algorithm with
-# a newly to create wpa_supplicant.conf variable acs_num_scans.
-#
-# Supported ACS drivers:
-# * ath9k
-# * ath5k
-# * ath10k
-#
-# For more details refer to:
-# http://wireless.kernel.org/en/users/Documentation/acs
-#CONFIG_ACS=y
-
-# Support Multi Band Operation
-#CONFIG_MBO=y
-
-# Fast Initial Link Setup (FILS) (IEEE 802.11ai)
-# Note: This is an experimental and not yet complete implementation. This
-# should not be enabled for production use.
-#CONFIG_FILS=y
-# FILS shared key authentication with PFS
-#CONFIG_FILS_SK_PFS=y
-
-# Support RSN on IBSS networks
-# This is needed to be able to use mode=1 network profile with proto=RSN and
-# key_mgmt=WPA-PSK (i.e., full key management instead of WPA-None).
-CONFIG_IBSS_RSN=y
-
-# External PMKSA cache control
-# This can be used to enable control interface commands that allow the current
-# PMKSA cache entries to be fetched and new entries to be added.
-#CONFIG_PMKSA_CACHE_EXTERNAL=y
-
-# Mesh Networking (IEEE 802.11s)
-#CONFIG_MESH=y
-
-# Background scanning modules
-# These can be used to request wpa_supplicant to perform background scanning
-# operations for roaming within an ESS (same SSID). See the bgscan parameter in
-# the wpa_supplicant.conf file for more details.
-# Periodic background scans based on signal strength
-CONFIG_BGSCAN_SIMPLE=y
-# Learn channels used by the network and try to avoid bgscans on other
-# channels (experimental)
-#CONFIG_BGSCAN_LEARN=y
-
-# Opportunistic Wireless Encryption (OWE)
-# Experimental implementation of draft-harkins-owe-07.txt
-#CONFIG_OWE=y
+CONFIG_WPS=y
+#CONFIG_MACSEC=y
+#CONFIG_DRIVER_MACSEC_LINUX=y