diff options
Diffstat (limited to 'source/n/network-scripts/scripts')
-rw-r--r-- | source/n/network-scripts/scripts/netconfig | 65 | ||||
-rw-r--r-- | source/n/network-scripts/scripts/rc.inet1 | 242 | ||||
-rw-r--r-- | source/n/network-scripts/scripts/rc.inet1.conf | 28 | ||||
-rw-r--r-- | source/n/network-scripts/scripts/rc.inet2 | 5 |
4 files changed, 224 insertions, 116 deletions
diff --git a/source/n/network-scripts/scripts/netconfig b/source/n/network-scripts/scripts/netconfig index 3bd483de..51e88bd4 100644 --- a/source/n/network-scripts/scripts/netconfig +++ b/source/n/network-scripts/scripts/netconfig @@ -40,24 +40,28 @@ fi # Config information for eth0: IPADDR[0]="$RCIPCOPY" NETMASK[0]="$RCMASKCOPY" +IPALIASES[0]="" USE_DHCP[0]="$USE_DHCP" DHCP_HOSTNAME[0]="$DHCP_HOSTNAME" # Config information for eth1: IPADDR[1]="" NETMASK[1]="" +IPALIASES[1]="" USE_DHCP[1]="" DHCP_HOSTNAME[1]="" # Config information for eth2: IPADDR[2]="" NETMASK[2]="" +IPALIASES[2]="" USE_DHCP[2]="" DHCP_HOSTNAME[2]="" # Config information for eth3: IPADDR[3]="" NETMASK[3]="" +IPALIASES[3]="" USE_DHCP[3]="" DHCP_HOSTNAME[3]="" @@ -71,16 +75,36 @@ DEBUG_ETH_UP="no" # Example of how to configure a bridge: # Note the added "BRNICS" variable which contains a space-separated list -# of the physical network interfaces you want to add to the bridge. +# of the physical or virtual network interfaces you want to add to the bridge. #IFNAME[0]="br0" #BRNICS[0]="eth0" #IPADDR[0]="192.168.0.1" #NETMASK[0]="255.255.255.0" +#IPALIASES[0]="" #USE_DHCP[0]="" #DHCP_HOSTNAME[0]="" +# Virtual interfaces to create - these are created before any address +# configuration or bridge setup is done, so you may use these interfaces +# as IFNAME or BRNICS values. These can be tun or tap interfaces: +# adjust VIRTIFNAME and VIRTIFTYPE accordingly. +# Starting with VIRTIFNAME[0] is mandatory, and each next one must be +# incremented by one, so VIRTIFNAME[1], VIRTIFNAME[2], and so on. +# +# Virtual tap interface example +#VIRTIFNAME[0]="tap0" +#VIRTIFTYPE[0]="tap" +#VIRTIFUSER[0]="root" +#VIRTIFGROUP[0]="root" +# +# Virtual tun interface example +#VIRTIFNAME[1]="tun0" +#VIRTIFTYPE[1]="tun" +#VIRTIFUSER[1]="someuser" +#VIRTIFGROUP[1]="somegroup" + ## Example config information for wlan0. Uncomment the lines you need and fill -## in your info. (You may not need all of these for your wireless network) +## in your data. (You may not need all of these for your wireless network) #IFNAME[4]="wlan0" #IPADDR[4]="" #NETMASK[4]="" @@ -90,38 +114,55 @@ DEBUG_ETH_UP="no" #DHCP_KEEPNTP[4]="yes" #DHCP_KEEPGW[4]="yes" #DHCP_IPADDR[4]="" -#WLAN_ESSID[4]=BARRIER05 +#WLAN_ESSID[4]=DARKSTAR #WLAN_MODE[4]=Managed -##WLAN_RATE[4]="54M auto" -##WLAN_CHANNEL[4]="auto" -##WLAN_KEY[4]="D5AD1F04ACF048EC2D0B1C80C7" -##WLAN_IWPRIV[4]="set AuthMode=WPAPSK | set EncrypType=TKIP | set WPAPSK=96389dc66eaf7e6efd5b5523ae43c7925ff4df2f8b7099495192d44a774fda16" +#WLAN_RATE[4]="54M auto" +#WLAN_CHANNEL[4]="auto" +#WLAN_KEY[4]="D5A31F54ACF0487C2D0B1C10D2" +#WLAN_IWPRIV[4]="set AuthMode=WPAPSK | set EncrypType=TKIP | set WPAPSK=96389dc66eaf7e6efd5b5523ae43c7925ff4df2f8b7099495192d44a774fda16" #WLAN_WPA[4]="wpa_supplicant" -#WLAN_WPADRIVER[4]="ndiswrapper" +#WLAN_WPADRIVER[4]="wext" +#WLAN_WPAWAIT[4]=30 ## Some examples of additional network parameters that you can use. ## Config information for wlan0: #IFNAME[4]="wlan0" # Use a different interface name instead of # the default 'eth4' +#IFNAME[4]="eth0:1" # Set up an IP alias. #HWADDR[4]="00:01:23:45:67:89" # Overrule the card's hardware MAC address #MTU[4]="" # The default MTU is 1500, but you might need # 1360 when you use NAT'ed IPSec traffic. +#DHCP_TIMEOUT[4]=15 # The default timeout for the DHCP client to + # wait for server resonse is 15 seconds, but + # you might want a shorter or longer wait. #DHCP_KEEPRESOLV[4]="yes" # If you don't want /etc/resolv.conf overwritten #DHCP_KEEPNTP[4]="yes" # If you don't want ntp.conf overwritten #DHCP_KEEPGW[4]="yes" # If you don't want the DHCP server to change # your default gateway #DHCP_IPADDR[4]="" # Request a specific IP address from the DHCP # server -#WLAN_ESSID[4]=DARKSTAR # Here, you can override _any_ parameter - # defined in rc.wireless.conf, by prepending - # 'WLAN_' to the parameter's name. Useful for - # those with multiple wireless interfaces. +#DHCP_DEBUG[4]="yes" # Make dhcpcd show verbose diagnostics +#DHCP_NOIPV4LL[4]="yes" # Do not assign an ipv4ll address when a DHCP + # server is not found (ipv4ll link-local + # adresses in the IP range 169.254.0.0/16 are + # also known as "zeroconf" addresses) +#WLAN_ESSID[4]=DARKSTAR # An example of how you can override _any_ + # parameter defined in rc.wireless.conf, by + # prepending 'WLAN_' to the parameter's name. + # Useful with multiple wireless interfaces. #WLAN_IWPRIV[4]="set AuthMode=WPAPSK | set EncrypType=TKIP | set WPAPSK=thekey" # Some drivers require a private ioctl to be # set through the iwpriv command. If more than # one is required, you can place them in the # IWPRIV parameter (separated with the pipe (|) # character, see the example). +#WLAN_WPA[4]="wpa_supplicant" # Run wpa_supplicant for WPA support +#WLAN_WPADRIVER[4]="ndiswrapper"# Tell wpa_supplicant to specifically use the + # ndiswrapper driver (if you leave this empty + # the 'wext' driver is used by default) +#WLAN_WPAWAIT[4]=30 # In case it takes long for the WPA association + # to finish, you can increase the wait time + # (defaults to 10 seconds) ENDFILE # ############################################################################ diff --git a/source/n/network-scripts/scripts/rc.inet1 b/source/n/network-scripts/scripts/rc.inet1 index f2d85a6d..2f566ef8 100644 --- a/source/n/network-scripts/scripts/rc.inet1 +++ b/source/n/network-scripts/scripts/rc.inet1 @@ -16,12 +16,19 @@ ########### # If possible, log events in /var/log/messages: -if [ -f /var/run/syslogd.pid -a -x /usr/bin/logger ]; then +if [ -f /var/run/syslogd.pid ] && [ -x /usr/bin/logger ]; then LOGGER=/usr/bin/logger else # output to stdout/stderr: LOGGER=/bin/cat fi +# Handy wrapper for verbose logging +debug_log() { + if [ "$DEBUG_ETH_UP" = "yes" ]; then + echo "/etc/rc.d/rc.inet1: $*" | $LOGGER + fi +} + ############################ # DETERMINE INTERFACE LIST # ############################ @@ -39,9 +46,7 @@ do IFNAME[$i]=${IFNAME[$i]:=eth${i}} i=$(($i+1)) done -if [ "$DEBUG_ETH_UP" = "yes" ]; then - echo "/etc/rc.d/rc.inet1: List of interfaces: '${IFNAME[@]}'" | $LOGGER -fi +debug_log "List of interfaces: '${IFNAME[*]}'" ###################### # LOOPBACK FUNCTIONS # @@ -50,21 +55,22 @@ fi # Function to bring up the loopback interface. If loopback is # already up, do nothing. lo_up() { - if grep lo: /proc/net/dev 1> /dev/null ; then - if ! /sbin/ifconfig | grep "^lo" 1> /dev/null ; then - echo "/etc/rc.d/rc.inet1: /sbin/ifconfig lo 127.0.0.1" | $LOGGER - /sbin/ifconfig lo 127.0.0.1 - echo "/etc/rc.d/rc.inet1: /sbin/route add -net 127.0.0.0 netmask 255.0.0.0 lo" | $LOGGER - /sbin/route add -net 127.0.0.0 netmask 255.0.0.0 lo + if [ -e /sys/class/net/lo ]; then + if ! /sbin/ip link show dev lo | grep -wq -e "state UP" -e "state UNKNOWN" ; then + echo "/etc/rc.d/rc.inet1: /sbin/ip address add 127.0.0.1/8 dev lo" | $LOGGER + /sbin/ip address add 127.0.0.1/8 dev lo + /sbin/ip link set dev lo up + echo "/etc/rc.d/rc.inet1: /sbin/ip route add 127.0.0.0/8 dev lo" | $LOGGER + /sbin/ip route add 127.0.0.0/8 dev lo fi fi } # Function to take down the loopback interface: lo_down() { - if grep lo: /proc/net/dev 1> /dev/null ; then - echo "/etc/rc.d/rc.inet1: /sbin/ifconfig lo down" | $LOGGER - /sbin/ifconfig lo down + if [ -e /sys/class/net/lo ]; then + echo "/etc/rc.d/rc.inet1: /sbin/ip link set dev lo down" | $LOGGER + /sbin/ip link set dev lo down fi } @@ -72,27 +78,48 @@ lo_down() { # INTERFACE FUNCTIONS # ####################### +# Function to create virtual interfaces +virtif_create() { + # argument is 'i' - the position of this interface in the VIRTIFNAME array. + # this loop goes from i=0 to i=number_of_configured_virtual_interfaces_minus_one + # which means it doesn't do anything if there are none. + for i in $(seq 0 $((${#VIRTIFNAME[@]} - 1))); do + /sbin/ip tuntap add dev ${VIRTIFNAME[$i]} mode ${VIRTIFTYPE[$i]} user ${VIRTIFUSER[$i]} group ${VIRTIFGROUP[$i]} + done +} + +# Function to destory virtual interfaces +virtif_destroy() { + # argument is 'i' - the position of this interface in the VIRTIFNAME array. + for i in $(seq 0 $((${#VIRTIFNAME[@]} - 1))); do + /sbin/ip tuntap del dev ${VIRTIFNAME[$i]} mode ${VIRTIFTYPE[$i]} + done +} + # Function to assemble a bridge interface. br_open() { # argument is 'i' - the position of this interface in the IFNAME array. - /sbin/brctl addbr ${IFNAME[$1]} - for BRIF in $(echo ${BRNICS[$1]}); do - /sbin/ifconfig $BRIF down - /sbin/ifconfig $BRIF 0.0.0.0 promisc up - /sbin/brctl addif ${IFNAME[$1]} $BRIF + /sbin/ip link add name ${IFNAME[$1]} type bridge + for BRIF in ${BRNICS[$1]}; do + /sbin/ip link set dev $BRIF down + /sbin/ip address add 0.0.0.0 dev $BRIF + /sbin/ip link set dev $BRIF master ${IFNAME[$1]} + /sbin/ip link set dev $BRIF up done + /sbin/ip link set dev ${IFNAME[$1]} up } # Function to disassemble a bridge interface. br_close() { + /sbin/ip link set dev ${IFNAME[$1]} down # argument is 'i' - the position of this interface in the IFNAME array. - #for BRIF in $(echo ${BRNICS[$1]}); do + #for BRIF in ${BRNICS[$1]}; do for BRIF in $(ls --indicator-style=none /sys/class/net/${IFNAME[$1]}/brif/) do - /sbin/brctl delif ${IFNAME[$1]} $BRIF + /sbin/ip link set dev $BRIF nomaster done - /sbin/ifconfig ${IFNAME[$1]} down - /sbin/brctl delbr ${IFNAME[$1]} + /sbin/ip link set dev ${IFNAME[$1]} down + /sbin/ip link del ${IFNAME[$1]} } # Function to bring up a network interface. If the interface is @@ -105,26 +132,41 @@ if_up() { [ "${IFNAME[$i]}" = "${1}" ] && break i=$(($i+1)) done + # If "i" is greater or equal to "MAXNICS" at this point, it means we didn't + # find an entry in IFNAME array corresponding to "$1", which likely means + # there are more interfaces configured than MAXNICS. Let's err on the + # side of caution and do nothing instead of possibly doing the wrong thing. + if [ $i -ge $MAXNICS ]; then + echo "/etc/rc.d/rc.inet1: skipping ${1}, you might need to increase MAXNICS" | $LOGGER + return + fi # If the interface is a bridge, then create it first: [ -n "${BRNICS[$i]}" ] && br_open $i # If the interface isn't in the kernel yet (but there's an alias for it in # modules.conf), then it should be loaded first: - if ! grep `echo ${1}: | cut -f 1 -d :`: /proc/net/dev 1> /dev/null ; then # no interface yet + if [ -z "${IPADDR[$i]}" ] && [ "${USE_DHCP[$i]}" != "yes" ]; then # skip unconfigured interfaces + debug_log "skipping ${1} early, interface is not configured in /etc/rc.d/rc.inet1.conf" + return 0 + fi + if [ ! -e /sys/class/net/${1%%:*} ]; then # no interface yet if /sbin/modprobe -c | grep -v "^#" | grep -w "alias ${1}" | grep -vw "alias ${1} off" > /dev/null ; then echo "/etc/rc.d/rc.inet1: /sbin/modprobe ${1}" | $LOGGER /sbin/modprobe ${1} fi fi - if grep `echo ${1}: | cut -f 1 -d :`: /proc/net/dev 1> /dev/null ; then # interface exists - if ! /sbin/ifconfig | grep -w "${1}" 1>/dev/null || \ - ! /sbin/ifconfig ${1} | grep -w inet 1> /dev/null ; then # interface not up or not configured - if [ ! "${HWADDR[$i]}" = "" ]; then # Set hardware address _before_ the interface goes up: - echo "/etc/rc.d/rc.inet1: /sbin/ifconfig ${1} hw ether ${HWADDR[$i]}" | $LOGGER - /sbin/ifconfig ${1} hw ether ${HWADDR[$i]} + if [ -e /sys/class/net/${1%%:*} ]; then # interface exists + if ! /sbin/ip address show dev ${1} 2>/dev/null | grep -wq inet || \ + ! /sbin/ip link show dev ${1} | grep -wq "state UP" ; then # interface not up or not configured + if [ -n "${HWADDR[$i]}" ]; then # Set hardware address _before_ the interface goes up: + echo "/etc/rc.d/rc.inet1: /sbin/ip link set dev ${1} address ${HWADDR[$i]}" | $LOGGER + /sbin/ip link set dev ${1} address ${HWADDR[$i]} + fi + if [ -n "${MTU[$i]}" ]; then # Set MTU to something else than 1500 + echo "/etc/rc.d/rc.inet1: /sbin/ip link set dev ${1} mtu ${MTU[$i]}" | $LOGGER + /sbin/ip link set dev ${1} mtu ${MTU[$i]} fi - if [ ! "${MTU[$i]}" = "" ]; then # Set MTU to something else than 1500 - echo "/etc/rc.d/rc.inet1: /sbin/ifconfig ${1} mtu ${MTU[$i]}" | $LOGGER - /sbin/ifconfig ${1} mtu ${MTU[$i]} + if /sbin/ip link show dev ${1} | grep -wq "state DOWN" ; then + /sbin/ip link set dev ${1} up # Bring up interface fi if [ -x /etc/rc.d/rc.wireless ]; then . /etc/rc.d/rc.wireless ${1} start # Initialize any wireless parameters @@ -133,13 +175,13 @@ if_up() { # Clear DHCP_OPTIONS before adding new options to it: unset DHCP_OPTIONS # Set DHCP_OPTIONS for this interface: - [ ${DHCP_HOSTNAME[$i]} ] && DHCP_OPTIONS="-h ${DHCP_HOSTNAME[$i]}" + [ -n "${DHCP_HOSTNAME[$i]}" ] && DHCP_OPTIONS="-h ${DHCP_HOSTNAME[$i]}" [ "${DHCP_KEEPRESOLV[$i]}" = "yes" ] && DHCP_OPTIONS="$DHCP_OPTIONS -C resolv.conf" [ "${DHCP_KEEPNTP[$i]}" = "yes" ] && DHCP_OPTIONS="$DHCP_OPTIONS -C ntp.conf" [ "${DHCP_KEEPGW[$i]}" = "yes" ] && DHCP_OPTIONS="$DHCP_OPTIONS -G" [ "${DHCP_DEBUG[$i]}" = "yes" ] && DHCP_OPTIONS="$DHCP_OPTIONS -d" [ "${DHCP_NOIPV4LL[$i]}" = "yes" ] && DHCP_OPTIONS="$DHCP_OPTIONS -L" - [ ${DHCP_IPADDR[$i]} ] && DHCP_OPTIONS="$DHCP_OPTIONS -r ${DHCP_IPADDR[$i]}" + [ -n "${DHCP_IPADDR[$i]}" ] && DHCP_OPTIONS="$DHCP_OPTIONS -r ${DHCP_IPADDR[$i]}" echo "Polling for DHCP server on interface ${1}:" # If you set a timeout, you get one, even if the kernel doesn't think that # your device is connected, in case /sys isn't right (which it usually isn't @@ -147,43 +189,54 @@ if_up() { #### (start commented out) # This is deactivated for now since the kernel has been returning incorrect # results concerning whether the interface carrier is detected. - #if [ "${DHCP_TIMEOUT[$i]}" = "" ]; then - # ifconfig ${1} up && sleep 1 + #if [ -z "${DHCP_TIMEOUT[$i]}" ]; then + # /sbin/ip link set dev ${1} up && sleep 1 # CONNSTATUS="$(cat /sys/class/net/${1}/carrier 2> /dev/null)" - # ifconfig ${1} down + # /sbin/ip link set dev ${1} down # if [ "$CONNSTATUS" = "0" ]; then # # The kernel has just told us the cable isn't even plugged in, but we will # # give any DHCP server a short chance to reply anyway: - # echo "No carrier detected on ${1}. Reducing DHCP timeout to 10 seconds." - # DHCP_TIMEOUT[$i]=10 + # echo "No carrier detected on ${1}. Reducing DHCP timeout to 15 seconds." + # DHCP_TIMEOUT[$i]=15 # fi #fi #### (end commented out) - # 10 seconds should be a reasonable default DHCP timeout. 30 was too much. - echo "/etc/rc.d/rc.inet1: /sbin/dhcpcd -t ${DHCP_TIMEOUT[$i]:-10} ${DHCP_OPTIONS} ${1}" | $LOGGER - /sbin/dhcpcd -t ${DHCP_TIMEOUT[$i]:-10} ${DHCP_OPTIONS} ${1} + # 15 seconds should be a reasonable default DHCP timeout. 30 was too much. + echo "/etc/rc.d/rc.inet1: /sbin/dhcpcd -L -t ${DHCP_TIMEOUT[$i]:-15} ${DHCP_OPTIONS} ${1}" | $LOGGER + /sbin/dhcpcd -L -t ${DHCP_TIMEOUT[$i]:-15} ${DHCP_OPTIONS} ${1} + # If the dhcpcd call succeeds, add extra IP addresses, if defined, to interface + if [ "$?" == "0" ] && [ -n "${IPALIASES[$i]}" ]; then + num=0 + for ipalias in ${IPALIASES[$i]}; do + /sbin/ip address add ${ipalias}/32 dev ${1} label ${1}:${num} ; + num=$(($num + 1)) + done + fi else # bring up interface using a static IP address - if [ ! "${IPADDR[$i]}" = "" ]; then # skip unconfigured interfaces - # Determine broadcast address from the IP address and netmask: - BROADCAST[$i]=`/bin/ipmask ${NETMASK[$i]} ${IPADDR[$i]}|cut -f1 -d' '` + if [ -n "${IPADDR[$i]}" ]; then # skip unconfigured interfaces # Set up the network card: - echo "/etc/rc.d/rc.inet1: /sbin/ifconfig ${1} ${IPADDR[$i]} broadcast ${BROADCAST[$i]} netmask ${NETMASK[$i]}" | $LOGGER - /sbin/ifconfig ${1} ${IPADDR[$i]} broadcast ${BROADCAST[$i]} netmask ${NETMASK[$i]} - else - if [ "$DEBUG_ETH_UP" = "yes" ]; then - echo "/etc/rc.d/rc.inet1: ${1} interface is not configured in /etc/rc.d/rc.inet1.conf" | $LOGGER + echo "/etc/rc.d/rc.inet1: /sbin/ip address add ${IPADDR[$i]}/${NETMASK[$i]} dev ${1}" | $LOGGER + /sbin/ip address add ${IPADDR[$i]}/${NETMASK[$i]} dev ${1} + if /sbin/ip link show dev ${1} | grep -wq "state DOWN" ; then + /sbin/ip link set dev ${1} up # Bring up interface fi + # Add extra IP addresses, if defined, to interface + if [ -n "${IPALIASES[$i]}" ]; then + num=0 + for ipalias in ${IPALIASES[$i]}; do + /sbin/ip address add ${ipalias}/32 dev ${1} label ${1}:${num} ; + num=$(($num + 1)) + done + fi + else + debug_log "${1} interface is not configured in /etc/rc.d/rc.inet1.conf" fi fi else - if [ "$DEBUG_ETH_UP" = "yes" ]; then - echo "/etc/rc.d/rc.inet1: ${1} is already up, skipping" | $LOGGER - fi + debug_log "${1} is already up, skipping" fi else - if [ "$DEBUG_ETH_UP" = "yes" ]; then - echo "/etc/rc.d/rc.inet1: ${1} interface does not exist (yet)" | $LOGGER - fi + debug_log "${1} interface does not exist (yet)" fi } @@ -195,14 +248,18 @@ if_down() { [ "${IFNAME[$i]}" = "${1}" ] && break i=$(($i+1)) done - if grep `echo ${1}: | cut -f 1 -d :`: /proc/net/dev 1> /dev/null ; then + if [ $i -ge $MAXNICS ]; then + echo "/etc/rc.d/rc.inet1: skipping ${1}, you might need to increase MAXNICS" | $LOGGER + return + fi + if [ -e /sys/class/net/${1%%:*} ]; then if [ "${USE_DHCP[$i]}" = "yes" ]; then echo "/etc/rc.d/rc.inet1: /sbin/dhcpcd -k -d ${1}" | $LOGGER - /sbin/dhcpcd -k -d ${1} 2> /dev/null || /sbin/ifconfig ${1} down + /sbin/dhcpcd -k -d ${1} 2> /dev/null || /sbin/ip link set dev ${1} down sleep 1 else - echo "/etc/rc.d/rc.inet1: /sbin/ifconfig ${1} down" | $LOGGER - /sbin/ifconfig ${1} down + echo "/etc/rc.d/rc.inet1: /sbin/ip link set dev ${1} down" | $LOGGER + /sbin/ip link set dev ${1} down fi if [ -x /etc/rc.d/rc.wireless ]; then . /etc/rc.d/rc.wireless ${1} stop # Kill wireless daemons if any. @@ -220,26 +277,27 @@ if_down() { # Function to bring up the gateway if there is not yet a default route: gateway_up() { - if ! /sbin/route -n | grep "^0.0.0.0" 1> /dev/null ; then - if [ ! "$GATEWAY" = "" ]; then - echo "/etc/rc.d/rc.inet1: /sbin/route add default gw ${GATEWAY} metric 1" | $LOGGER - /sbin/route add default gw ${GATEWAY} metric 1 2>&1 | $LOGGER + if ! /sbin/ip route show | grep -wq default ; then + if [ -n "$GATEWAY" ]; then + echo "/etc/rc.d/rc.inet1: /sbin/ip route add default via ${GATEWAY}" | $LOGGER + /sbin/ip route add default via ${GATEWAY} | $LOGGER fi fi } # Function to take down an existing default gateway: gateway_down() { - if /sbin/route -n | grep "^0.0.0.0" 1> /dev/null ; then - echo "/etc/rc.d/rc.inet1: /sbin/route del default" | $LOGGER - /sbin/route del default + if /sbin/ip route show | grep -wq default ; then + echo "/etc/rc.d/rc.inet1: /sbin/ip route del default" | $LOGGER + /sbin/ip route del default fi } # Function to start the network: start() { lo_up - for i in ${IFNAME[@]} ; do + virtif_create + for i in "${IFNAME[@]}" ; do if_up $i done gateway_up @@ -248,9 +306,10 @@ start() { # Function to stop the network: stop() { gateway_down - for i in ${IFNAME[@]} ; do + for i in "${IFNAME[@]}" ; do if_down $i done + virtif_destroy lo_down } @@ -260,59 +319,38 @@ stop() { ############ case "$1" in -'start') # "start" brings up all configured interfaces: +start|up) # "start" (or "up") brings up all configured interfaces: start ;; -'stop') # "stop" takes down all configured interfaces: +stop|down) # "stop" (or "down") takes down all configured interfaces: stop ;; -'restart') # "restart" restarts the network: +restart) # "restart" restarts the network: stop start ;; -'lo_start') # Start the loopback interface: +lo_start|lo_up) # Start the loopback interface: lo_up ;; -*_start) # Example: "eth1_start" will start the specified interface 'eth1' - INTERFACE=`echo $1 | /bin/cut -d '_' -f 1` +lo_stop|lo_down) # Stop the loopback interface: + lo_down + ;; +*_start|*_up) # Example: "eth1_start" (or "eth1_up") will start the specified interface 'eth1' + INTERFACE=$(echo $1 | /bin/cut -d '_' -f 1) if_up $INTERFACE gateway_up ;; -'lo_stop') # Stop the loopback interface: - lo_down - ;; -*_stop) # Example: "eth0_stop" will stop the specified interface 'eth0' - INTERFACE=`echo $1 | /bin/cut -d '_' -f 1` +*_stop|*_down) # Example: "eth0_stop" (or "eth0_down") will stop the specified interface 'eth0' + INTERFACE=$(echo $1 | /bin/cut -d '_' -f 1) if_down $INTERFACE ;; *_restart) # Example: "wlan0_restart" will take 'wlan0' down and up again - INTERFACE=`echo $1 | /bin/cut -d '_' -f 1` + INTERFACE=$(echo $1 | /bin/cut -d '_' -f 1) if_down $INTERFACE sleep 1 if_up $INTERFACE gateway_up ;; -'up') # "up" does the same thing as "start" - start - ;; -'down') # "down" does the same thing as "stop" - stop - ;; -'lo_up') # Start the loopback interface: - lo_up - ;; -*_up) # "*_up" does the same thing as "*_start" - INTERFACE=`echo $1 | /bin/cut -d '_' -f 1` - if_up $INTERFACE - gateway_up - ;; -'lo_down') # Stop the loopback interface: - lo_down - ;; -*_down) # "*_down" does the same thing as "*_stop" - INTERFACE=`echo $1 | /bin/cut -d '_' -f 1` - if_down $INTERFACE - ;; *) # The default is to bring up all configured interfaces: start esac diff --git a/source/n/network-scripts/scripts/rc.inet1.conf b/source/n/network-scripts/scripts/rc.inet1.conf index 85a8041b..58766d25 100644 --- a/source/n/network-scripts/scripts/rc.inet1.conf +++ b/source/n/network-scripts/scripts/rc.inet1.conf @@ -16,24 +16,28 @@ # Config information for eth0: IPADDR[0]="" NETMASK[0]="" +IPALIASES[0]="" USE_DHCP[0]="" DHCP_HOSTNAME[0]="" # Config information for eth1: IPADDR[1]="" NETMASK[1]="" +IPALIASES[1]="" USE_DHCP[1]="" DHCP_HOSTNAME[1]="" # Config information for eth2: IPADDR[2]="" NETMASK[2]="" +IPALIASES[2]="" USE_DHCP[2]="" DHCP_HOSTNAME[2]="" # Config information for eth3: IPADDR[3]="" NETMASK[3]="" +IPALIASES[3]="" USE_DHCP[3]="" DHCP_HOSTNAME[3]="" @@ -47,14 +51,34 @@ DEBUG_ETH_UP="no" # Example of how to configure a bridge: # Note the added "BRNICS" variable which contains a space-separated list -# of the physical network interfaces you want to add to the bridge. +# of the physical or virtual network interfaces you want to add to the bridge. #IFNAME[0]="br0" #BRNICS[0]="eth0" #IPADDR[0]="192.168.0.1" #NETMASK[0]="255.255.255.0" +#IPALIASES[0]="" #USE_DHCP[0]="" #DHCP_HOSTNAME[0]="" +# Virtual interfaces to create - these are created before any address +# configuration or bridge setup is done, so you may use these interfaces +# as IFNAME or BRNICS values. These can be tun or tap interfaces: +# adjust VIRTIFNAME and VIRTIFTYPE accordingly. +# Starting with VIRTIFNAME[0] is mandatory, and each next one must be +# incremented by one, so VIRTIFNAME[1], VIRTIFNAME[2], and so on. +# +# Virtual tap interface example +#VIRTIFNAME[0]="tap0" +#VIRTIFTYPE[0]="tap" +#VIRTIFUSER[0]="root" +#VIRTIFGROUP[0]="root" +# +# Virtual tun interface example +#VIRTIFNAME[1]="tun0" +#VIRTIFTYPE[1]="tun" +#VIRTIFUSER[1]="someuser" +#VIRTIFGROUP[1]="somegroup" + ## Example config information for wlan0. Uncomment the lines you need and fill ## in your data. (You may not need all of these for your wireless network) #IFNAME[4]="wlan0" @@ -85,7 +109,7 @@ DEBUG_ETH_UP="no" #MTU[4]="" # The default MTU is 1500, but you might need # 1360 when you use NAT'ed IPSec traffic. #DHCP_TIMEOUT[4]=15 # The default timeout for the DHCP client to - # wait for server resonse is 10 seconds, but + # wait for server resonse is 15 seconds, but # you might want a shorter or longer wait. #DHCP_KEEPRESOLV[4]="yes" # If you don't want /etc/resolv.conf overwritten #DHCP_KEEPNTP[4]="yes" # If you don't want ntp.conf overwritten diff --git a/source/n/network-scripts/scripts/rc.inet2 b/source/n/network-scripts/scripts/rc.inet2 index 4f51a330..300ede3e 100644 --- a/source/n/network-scripts/scripts/rc.inet2 +++ b/source/n/network-scripts/scripts/rc.inet2 @@ -101,6 +101,11 @@ if [ -x /etc/rc.d/rc.yp ]; then /etc/rc.d/rc.yp start fi +# Start OpenVPN: +if [ -x /etc/rc.d/rc.openvpn ]; then + /etc/rc.d/rc.openvpn start +fi + # Start the NFS server. Note that for this to work correctly, you'll # need nfsd support in the kernel (the startup script will try to load # the module for you). |