summaryrefslogtreecommitdiff
path: root/source/n/network-scripts/scripts/rc.inet1.conf
diff options
context:
space:
mode:
Diffstat (limited to 'source/n/network-scripts/scripts/rc.inet1.conf')
-rw-r--r--source/n/network-scripts/scripts/rc.inet1.conf28
1 files changed, 26 insertions, 2 deletions
diff --git a/source/n/network-scripts/scripts/rc.inet1.conf b/source/n/network-scripts/scripts/rc.inet1.conf
index 85a8041b..58766d25 100644
--- a/source/n/network-scripts/scripts/rc.inet1.conf
+++ b/source/n/network-scripts/scripts/rc.inet1.conf
@@ -16,24 +16,28 @@
# Config information for eth0:
IPADDR[0]=""
NETMASK[0]=""
+IPALIASES[0]=""
USE_DHCP[0]=""
DHCP_HOSTNAME[0]=""
# Config information for eth1:
IPADDR[1]=""
NETMASK[1]=""
+IPALIASES[1]=""
USE_DHCP[1]=""
DHCP_HOSTNAME[1]=""
# Config information for eth2:
IPADDR[2]=""
NETMASK[2]=""
+IPALIASES[2]=""
USE_DHCP[2]=""
DHCP_HOSTNAME[2]=""
# Config information for eth3:
IPADDR[3]=""
NETMASK[3]=""
+IPALIASES[3]=""
USE_DHCP[3]=""
DHCP_HOSTNAME[3]=""
@@ -47,14 +51,34 @@ DEBUG_ETH_UP="no"
# Example of how to configure a bridge:
# Note the added "BRNICS" variable which contains a space-separated list
-# of the physical network interfaces you want to add to the bridge.
+# of the physical or virtual network interfaces you want to add to the bridge.
#IFNAME[0]="br0"
#BRNICS[0]="eth0"
#IPADDR[0]="192.168.0.1"
#NETMASK[0]="255.255.255.0"
+#IPALIASES[0]=""
#USE_DHCP[0]=""
#DHCP_HOSTNAME[0]=""
+# Virtual interfaces to create - these are created before any address
+# configuration or bridge setup is done, so you may use these interfaces
+# as IFNAME or BRNICS values. These can be tun or tap interfaces:
+# adjust VIRTIFNAME and VIRTIFTYPE accordingly.
+# Starting with VIRTIFNAME[0] is mandatory, and each next one must be
+# incremented by one, so VIRTIFNAME[1], VIRTIFNAME[2], and so on.
+#
+# Virtual tap interface example
+#VIRTIFNAME[0]="tap0"
+#VIRTIFTYPE[0]="tap"
+#VIRTIFUSER[0]="root"
+#VIRTIFGROUP[0]="root"
+#
+# Virtual tun interface example
+#VIRTIFNAME[1]="tun0"
+#VIRTIFTYPE[1]="tun"
+#VIRTIFUSER[1]="someuser"
+#VIRTIFGROUP[1]="somegroup"
+
## Example config information for wlan0. Uncomment the lines you need and fill
## in your data. (You may not need all of these for your wireless network)
#IFNAME[4]="wlan0"
@@ -85,7 +109,7 @@ DEBUG_ETH_UP="no"
#MTU[4]="" # The default MTU is 1500, but you might need
# 1360 when you use NAT'ed IPSec traffic.
#DHCP_TIMEOUT[4]=15 # The default timeout for the DHCP client to
- # wait for server resonse is 10 seconds, but
+ # wait for server resonse is 15 seconds, but
# you might want a shorter or longer wait.
#DHCP_KEEPRESOLV[4]="yes" # If you don't want /etc/resolv.conf overwritten
#DHCP_KEEPNTP[4]="yes" # If you don't want ntp.conf overwritten