summaryrefslogtreecommitdiff
path: root/source/n/network-scripts/scripts/netconfig
diff options
context:
space:
mode:
Diffstat (limited to 'source/n/network-scripts/scripts/netconfig')
-rw-r--r--source/n/network-scripts/scripts/netconfig65
1 files changed, 53 insertions, 12 deletions
diff --git a/source/n/network-scripts/scripts/netconfig b/source/n/network-scripts/scripts/netconfig
index 3bd483de..51e88bd4 100644
--- a/source/n/network-scripts/scripts/netconfig
+++ b/source/n/network-scripts/scripts/netconfig
@@ -40,24 +40,28 @@ fi
# Config information for eth0:
IPADDR[0]="$RCIPCOPY"
NETMASK[0]="$RCMASKCOPY"
+IPALIASES[0]=""
USE_DHCP[0]="$USE_DHCP"
DHCP_HOSTNAME[0]="$DHCP_HOSTNAME"
# Config information for eth1:
IPADDR[1]=""
NETMASK[1]=""
+IPALIASES[1]=""
USE_DHCP[1]=""
DHCP_HOSTNAME[1]=""
# Config information for eth2:
IPADDR[2]=""
NETMASK[2]=""
+IPALIASES[2]=""
USE_DHCP[2]=""
DHCP_HOSTNAME[2]=""
# Config information for eth3:
IPADDR[3]=""
NETMASK[3]=""
+IPALIASES[3]=""
USE_DHCP[3]=""
DHCP_HOSTNAME[3]=""
@@ -71,16 +75,36 @@ DEBUG_ETH_UP="no"
# Example of how to configure a bridge:
# Note the added "BRNICS" variable which contains a space-separated list
-# of the physical network interfaces you want to add to the bridge.
+# of the physical or virtual network interfaces you want to add to the bridge.
#IFNAME[0]="br0"
#BRNICS[0]="eth0"
#IPADDR[0]="192.168.0.1"
#NETMASK[0]="255.255.255.0"
+#IPALIASES[0]=""
#USE_DHCP[0]=""
#DHCP_HOSTNAME[0]=""
+# Virtual interfaces to create - these are created before any address
+# configuration or bridge setup is done, so you may use these interfaces
+# as IFNAME or BRNICS values. These can be tun or tap interfaces:
+# adjust VIRTIFNAME and VIRTIFTYPE accordingly.
+# Starting with VIRTIFNAME[0] is mandatory, and each next one must be
+# incremented by one, so VIRTIFNAME[1], VIRTIFNAME[2], and so on.
+#
+# Virtual tap interface example
+#VIRTIFNAME[0]="tap0"
+#VIRTIFTYPE[0]="tap"
+#VIRTIFUSER[0]="root"
+#VIRTIFGROUP[0]="root"
+#
+# Virtual tun interface example
+#VIRTIFNAME[1]="tun0"
+#VIRTIFTYPE[1]="tun"
+#VIRTIFUSER[1]="someuser"
+#VIRTIFGROUP[1]="somegroup"
+
## Example config information for wlan0. Uncomment the lines you need and fill
-## in your info. (You may not need all of these for your wireless network)
+## in your data. (You may not need all of these for your wireless network)
#IFNAME[4]="wlan0"
#IPADDR[4]=""
#NETMASK[4]=""
@@ -90,38 +114,55 @@ DEBUG_ETH_UP="no"
#DHCP_KEEPNTP[4]="yes"
#DHCP_KEEPGW[4]="yes"
#DHCP_IPADDR[4]=""
-#WLAN_ESSID[4]=BARRIER05
+#WLAN_ESSID[4]=DARKSTAR
#WLAN_MODE[4]=Managed
-##WLAN_RATE[4]="54M auto"
-##WLAN_CHANNEL[4]="auto"
-##WLAN_KEY[4]="D5AD1F04ACF048EC2D0B1C80C7"
-##WLAN_IWPRIV[4]="set AuthMode=WPAPSK | set EncrypType=TKIP | set WPAPSK=96389dc66eaf7e6efd5b5523ae43c7925ff4df2f8b7099495192d44a774fda16"
+#WLAN_RATE[4]="54M auto"
+#WLAN_CHANNEL[4]="auto"
+#WLAN_KEY[4]="D5A31F54ACF0487C2D0B1C10D2"
+#WLAN_IWPRIV[4]="set AuthMode=WPAPSK | set EncrypType=TKIP | set WPAPSK=96389dc66eaf7e6efd5b5523ae43c7925ff4df2f8b7099495192d44a774fda16"
#WLAN_WPA[4]="wpa_supplicant"
-#WLAN_WPADRIVER[4]="ndiswrapper"
+#WLAN_WPADRIVER[4]="wext"
+#WLAN_WPAWAIT[4]=30
## Some examples of additional network parameters that you can use.
## Config information for wlan0:
#IFNAME[4]="wlan0" # Use a different interface name instead of
# the default 'eth4'
+#IFNAME[4]="eth0:1" # Set up an IP alias.
#HWADDR[4]="00:01:23:45:67:89" # Overrule the card's hardware MAC address
#MTU[4]="" # The default MTU is 1500, but you might need
# 1360 when you use NAT'ed IPSec traffic.
+#DHCP_TIMEOUT[4]=15 # The default timeout for the DHCP client to
+ # wait for server resonse is 15 seconds, but
+ # you might want a shorter or longer wait.
#DHCP_KEEPRESOLV[4]="yes" # If you don't want /etc/resolv.conf overwritten
#DHCP_KEEPNTP[4]="yes" # If you don't want ntp.conf overwritten
#DHCP_KEEPGW[4]="yes" # If you don't want the DHCP server to change
# your default gateway
#DHCP_IPADDR[4]="" # Request a specific IP address from the DHCP
# server
-#WLAN_ESSID[4]=DARKSTAR # Here, you can override _any_ parameter
- # defined in rc.wireless.conf, by prepending
- # 'WLAN_' to the parameter's name. Useful for
- # those with multiple wireless interfaces.
+#DHCP_DEBUG[4]="yes" # Make dhcpcd show verbose diagnostics
+#DHCP_NOIPV4LL[4]="yes" # Do not assign an ipv4ll address when a DHCP
+ # server is not found (ipv4ll link-local
+ # adresses in the IP range 169.254.0.0/16 are
+ # also known as "zeroconf" addresses)
+#WLAN_ESSID[4]=DARKSTAR # An example of how you can override _any_
+ # parameter defined in rc.wireless.conf, by
+ # prepending 'WLAN_' to the parameter's name.
+ # Useful with multiple wireless interfaces.
#WLAN_IWPRIV[4]="set AuthMode=WPAPSK | set EncrypType=TKIP | set WPAPSK=thekey"
# Some drivers require a private ioctl to be
# set through the iwpriv command. If more than
# one is required, you can place them in the
# IWPRIV parameter (separated with the pipe (|)
# character, see the example).
+#WLAN_WPA[4]="wpa_supplicant" # Run wpa_supplicant for WPA support
+#WLAN_WPADRIVER[4]="ndiswrapper"# Tell wpa_supplicant to specifically use the
+ # ndiswrapper driver (if you leave this empty
+ # the 'wext' driver is used by default)
+#WLAN_WPAWAIT[4]=30 # In case it takes long for the WPA association
+ # to finish, you can increase the wait time
+ # (defaults to 10 seconds)
ENDFILE
#
############################################################################