summaryrefslogtreecommitdiff
path: root/source/n/network-scripts/scripts/netconfig
diff options
context:
space:
mode:
Diffstat (limited to 'source/n/network-scripts/scripts/netconfig')
-rw-r--r--source/n/network-scripts/scripts/netconfig655
1 files changed, 464 insertions, 191 deletions
diff --git a/source/n/network-scripts/scripts/netconfig b/source/n/network-scripts/scripts/netconfig
index 5c5bf8a6..f3e9742f 100644
--- a/source/n/network-scripts/scripts/netconfig
+++ b/source/n/network-scripts/scripts/netconfig
@@ -15,96 +15,187 @@ write_config_files() {
# we use the IP in other places, we need to make a copy for here.
RCIPCOPY=$IPADDR
RCMASKCOPY=$NETMASK
+RCIP6COPY=$IPADDR6
+RCPREFIXCOPY=$PREFIX6
if [ "$RCIPCOPY" = "127.0.0.1" ]; then
RCIPCOPY=""
RCMASKCOPY=""
fi
+if [ "$RCIP6COPY" = "::1" ]; then
+ RCIP6COPY=""
+ RCPREFIXCOPY=""
+fi
# echo "Creating /$RC..."
/bin/cat << ENDFILE > $RC
# /etc/rc.d/rc.inet1.conf
#
# This file contains the configuration settings for network interfaces.
+#
# If USE_DHCP[interface] is set to "yes", this overrides any other settings.
# If you don't have an interface, leave the settings null ("").
-
+#
# You can configure network interfaces other than eth0,eth1... by setting
# IFNAME[interface] to the interface's name. If IFNAME[interface] is unset
# or empty, it is assumed you're configuring eth<interface>.
-
-# Several other parameters are available, the end of this file contains a
+#
+# Several other parameters are available; the end of this file contains a
# comprehensive set of examples.
+#
+# Important note for IPv6 stateless auto configuration (SLAAC) users:
+# From Slackware 15.0 onwards, you need to set USE_SLAAC[0]="yes" below.
# =============================================================================
-# Config information for eth0:
+# IPv4 config information for eth0:
+ENDFILE
+
+if [ -n "$VLAN" ]; then
+ echo "IFNAME[0]=\"eth0$VLAN\"" >>$RC
+fi
+
+/bin/cat << ENDFILE >> $RC
IPADDR[0]="$RCIPCOPY"
NETMASK[0]="$RCMASKCOPY"
IPALIASES[0]=""
USE_DHCP[0]="$USE_DHCP"
DHCP_HOSTNAME[0]="$DHCP_HOSTNAME"
+# IPv6 config information for eth0:
+IP6ADDRS[0]="`if [ ! \"$RCIP6COPY\" = \"\" ]; then echo \"$RCIP6COPY/$RCPREFIXCOPY\"; fi`"
+USE_SLAAC[0]="$USE_SLAAC"
+USE_DHCP6[0]="$USE_DHCP6"
-# Config information for eth1:
+# IPv4 config information for eth1:
IPADDR[1]=""
NETMASK[1]=""
IPALIASES[1]=""
USE_DHCP[1]=""
DHCP_HOSTNAME[1]=""
+# IPv6 config information for eth1:
+IP6ADDRS[1]=""
+USE_SLAAC[1]=""
+USE_DHCP6[1]=""
-# Config information for eth2:
+# IPv4 config information for eth2:
IPADDR[2]=""
NETMASK[2]=""
IPALIASES[2]=""
USE_DHCP[2]=""
DHCP_HOSTNAME[2]=""
+# IPv6 config information for eth2:
+IP6ADDRS[2]=""
+USE_SLAAC[2]=""
+USE_DHCP6[2]=""
-# Config information for eth3:
+# IPv4 config information for eth3:
IPADDR[3]=""
NETMASK[3]=""
IPALIASES[3]=""
USE_DHCP[3]=""
DHCP_HOSTNAME[3]=""
+# IPv6 config information for eth3:
+IP6ADDRS[3]=""
+USE_SLAAC[3]=""
+USE_DHCP6[3]=""
-# Default gateway IP address:
+# IPv4 default gateway IP address:
GATEWAY="$GATEWAY"
+# IPv6 default gateway IP address:
+GATEWAY6="$GATEWAY6"
-# Change this to "yes" for debugging output to stdout. Unfortunately,
-# /sbin/hotplug seems to disable stdout so you'll only see debugging output
-# when rc.inet1 is called directly.
-DEBUG_ETH_UP="no"
+# =============================================================================
+
+# Example of how to configure a bond (link aggrigation) interface.
+# Note the addition of the BONDNICS and BONDMODE parameters.
+# BONDNICS is a space delimited list of interfaces to add to this bond. The
+# BONDNICS interfaces will be brought up and configured while bringing up the
+# bond interface, so do not need to be previously defined in rc.inet1.conf.
+# BONDMODE sets the bonding mode for this interface. If not specified when
+# BONDNICS has been used, the default is 'balance-rr'.
+# IFOPTS is a pipe (|) delimited list of bonding module specific settings to be
+# applied to the interface, and should always include the 'miimon' option when
+# configuring bonding - not using this option will result in network
+# degradation. In 'active-backup' mode, the 'primary' option should also be
+# supplied. When using '802.3ad' mode, set "lacp_rate fast" for faster
+# recovery from an interface failure. In other modes, the 'xmit_hash_policy'
+# should be set. See the /usr/src/linux/Documentation/networking/bonding.txt
+# file (search for "Bonding Driver Options") for the full set of options.
+#IFNAME[0]="bond0"
+#BONDNICS[0]="eth0 eth1"
+#BONDMODE[0]="balance-rr"
+#IFOPTS[0]="xmit_hash_policy layer2+3 | miimon 100"
+#IPADDR[0]="192.168.0.1"
+#NETMASK[0]="24"
+#IPALIASES[0]=""
+#USE_DHCP[0]=""
+#DHCP_HOSTNAME[0]=""
+#IP6ADDRS[0]=""
+#USE_SLAAC[0]=""
+#USE_DHCP6[0]=""
+
+# =============================================================================
+
+# Example of how to configure a VLAN interface:
+# The VLAN ID is taken from the full interface name, which is comprised of the
+# underlying interface name, a period (.) and then the VLAN ID.
+# IFOPTS is a pipe (|) delimited list of VLAN module specific settings to be
+# applied to the interface. See the ip-link(8) man page (search for "VLAN Type
+# Support") for details of the options available. This option is not required
+# for a standard VLAN to be configured.
+#IFNAME[0]="eth0.10"
+#IFOPTS[0]=""
+#IPADDR[0]="192.168.10.1"
+#NETMASK[0]="24"
+#IPALIASES[0]=""
+#USE_DHCP[0]=""
+#DHCP_HOSTNAME[0]=""
+#IP6ADDRS[0]=""
+#USE_SLAAC[0]=""
+#USE_DHCP6[0]=""
+
+# =============================================================================
# Example of how to configure a bridge:
# Note the added "BRNICS" variable which contains a space-separated list
# of the physical or virtual network interfaces you want to add to the bridge.
+# IFOPTS is a pipe (|) delimited list of bridge module specific settings to be
+# applied to the interface. See the ip-link(8) man page (search for "BRIDGE
+# Type Support") for details of the options available. This option is not
+# required for a standard bridge to be configured.
#IFNAME[0]="br0"
#BRNICS[0]="eth0"
+#IFOPTS[0]=""
#IPADDR[0]="192.168.0.1"
-#NETMASK[0]="255.255.255.0"
+#NETMASK[0]="24"
#IPALIASES[0]=""
#USE_DHCP[0]=""
#DHCP_HOSTNAME[0]=""
+# =============================================================================
+
# Virtual interfaces to create - these are created before any address
# configuration or bridge setup is done, so you may use these interfaces
# as IFNAME or BRNICS values. These can be tun or tap interfaces:
# adjust VIRTIFNAME and VIRTIFTYPE accordingly.
# Starting with VIRTIFNAME[0] is mandatory, and each next one must be
# incremented by one, so VIRTIFNAME[1], VIRTIFNAME[2], and so on.
-#
# Virtual tap interface example
#VIRTIFNAME[0]="tap0"
#VIRTIFTYPE[0]="tap"
#VIRTIFUSER[0]="root"
#VIRTIFGROUP[0]="root"
-#
+
# Virtual tun interface example
#VIRTIFNAME[1]="tun0"
#VIRTIFTYPE[1]="tun"
#VIRTIFUSER[1]="someuser"
#VIRTIFGROUP[1]="somegroup"
-## Example config information for wlan0. Uncomment the lines you need and fill
-## in your data. (You may not need all of these for your wireless network)
+# =============================================================================
+
+# Example config information for wlan0:
+# Uncomment the lines you need and fill in your data. You may not need all of
+# these for your wireless network.
#IFNAME[4]="wlan0"
#IPADDR[4]=""
#NETMASK[4]=""
@@ -124,13 +215,16 @@ DEBUG_ETH_UP="no"
#WLAN_WPADRIVER[4]="wext"
#WLAN_WPAWAIT[4]=30
-## Some examples of additional network parameters that you can use.
-## Config information for wlan0:
+
+# =============================================================================
+
+# Some examples of additional network parameters that you can use.
#IFNAME[4]="wlan0" # Use a different interface name instead of
# the default 'eth4'
-#IPALIASES[4]="192.168.5.10/24" # Set up an IP alias. A netmask may be given
- # with a /<prefix> after the IP address - if
- # not supplied, /32 will be used as default.
+#IPALIASES[4]="192.168.5.10/24" # A space delimited list of CIDR formatted IP
+ # aliases to assign to the interface after it
+ # has come up. If no /<prefix> is given after
+ # the IP address, /24 will be used as default.
#HWADDR[4]="00:01:23:45:67:89" # Overrule the card's hardware MAC address
#MTU[4]="" # The default MTU is 1500, but you might need
# 1360 when you use NAT'ed IPSec traffic.
@@ -149,6 +243,11 @@ DEBUG_ETH_UP="no"
# server is not found (ipv4ll link-local
# adresses in the IP range 169.254.0.0/16 are
# also known as "zeroconf" addresses)
+#SLAAC_TIMEOUT[4]="15" # The default timeout for auto configuration to
+ # wait for the interface to come up is 15 sec.
+ # Increase the timeout if required.
+#USE_RA[4]="yes" # Accept router advertisements even when SLAAC
+ # is disabled on the interface.
#WLAN_ESSID[4]=DARKSTAR # An example of how you can override _any_
# parameter defined in rc.wireless.conf, by
# prepending 'WLAN_' to the parameter's name.
@@ -166,6 +265,16 @@ DEBUG_ETH_UP="no"
#WLAN_WPAWAIT[4]=30 # In case it takes long for the WPA association
# to finish, you can increase the wait time
# (defaults to 10 seconds)
+
+# =============================================================================
+
+# Change this to "yes" for debugging output to stdout.
+DEBUG_ETH_UP="no"
+
+# MAXNICS is the maximum number of interfaces that will be configured.
+# You may need to increase the MAXNICS value if you have many interfaces, or
+# you use multiple VLANs and/or bridges. The default is 6.
+# MAXNICS="6"
ENDFILE
#
############################################################################
@@ -208,11 +317,10 @@ chmod 644 $ETCNETWORKS
# For loopbacking.
127.0.0.1 localhost
-$IPADDR $HOSTNM.$DOMAIN $HOSTNM
-
-# End of hosts.
-
+::1 localhost
EOF
+[ -n "$IPADDR" ] && echo -e "$IPADDR\t\t$HOSTNM.$DOMAIN $HOSTNM" >>$HOSTS
+[ -n "$IPADDR6" ] && echo -e "$IPADDR6\t\t$HOSTNM.$DOMAIN $HOSTNM" >>$HOSTS
chmod 644 $HOSTS
#
############################################################################
@@ -259,7 +367,7 @@ fi
# example: syntax_check 123.22.43.1 4
# returns: 0=found correct 1=too many fields 2=non numeric field found
syntax_check_color() {
- RET_CODE=0
+ RET_CODE=0
SCRATCH=$1
SCRATCH=`echo $SCRATCH | tr "." "/"`
INDEX=$2
@@ -279,16 +387,11 @@ syntax_check_color() {
fi
if [ "$3" = "WARN" -a ! "$RET_CODE" = "0" ]; then
cat << EOF > $TMP/tempmsg
-
-The address you have entered seems to be non-standard. We were expecting
-$2 groups of numbers seperated by dots, like: 127.0.0.1
-Are you absolutely sure you want to use the address $1?
-
+The value you have entered seems to be non-standard. We were
+expecting $2 groups of numbers seperated by dots, like: 127.0.0.1
+Please enter a valid value.
EOF
- dialog --title "WARNING" --yesno "`cat $TMP/tempmsg`" 9 72
- if [ $? = 0 ]; then
- RET_CODE = 0;
- fi
+ dialog --title "INVALID VALUE" --defaultno --msgbox "`cat $TMP/tempmsg`" 7 72
rm -r $TMP/tempmsg
else
if [ "$3" = "ECHO" ]; then
@@ -309,14 +412,16 @@ RC=etc/rc.d/rc.inet1.conf # Where rc.inet1.conf file is.
RESOLV=etc/resolv.conf # Where resolv.conf file is.
HOSTS=etc/hosts # Where hosts file is.
ETCNETWORKS=etc/networks # Where networks file is.
-USE_DHCP="" # Use DHCP? "" == no.
-DHCP_HOSTNAME="" # This is our DHCP hostname.
#
# defaults:
+USE_DHCP="" # Use DHCP? "" == no.
+USE_DHCP6=""
+DHCP_HOSTNAME="" # This is our DHCP hostname.
NETWORK=127.0.0.0
IPADDR=127.0.0.1
-NETMASK=255.255.255.0
-
+NETMASK=24 # Use CIDR now.
+IPADDR6=::1
+PREFIX6=64
# Main loop:
while [ 0 ]; do
@@ -365,11 +470,29 @@ done
# Write the hostname with domain to /etc/HOSTNAME:
echo $HOSTNM.$DOMAIN > etc/HOSTNAME
-## OBSOLETE with recent NetworkManager:
-## Also make sure the hostname is written to /etc/NetworkManager/NetworkManager.conf:
-#if [ -w etc/NetworkManager/NetworkManager.conf ]; then
-# sed -i "s/^hostname=.*$/hostname=$HOSTNM/g" etc/NetworkManager/NetworkManager.conf
-#fi
+
+dialog --title "CONNECT VIA VLAN" --defaultno --yesno \
+"Some advanced networking set ups require a VLAN ID in order to \
+connect to the network. Do you wish to configure a VLAN now? \n\n\
+Unless you are sure you require a VLAN, select 'No'." 8 68
+if [ $? = 0 ]; then
+ while true; do
+ dialog --title "VLAN ID" --cancel-label "Skip" --inputbox \
+ "Enter the VLAN ID used on this network." 8 45 2>$TMP/reply
+ if [ $? = 0 ]; then
+ if ! (($(cat $TMP/reply))) 2>/dev/null; then
+ dialog --title "VLAN ID" --ok-button "Back" --msgbox \
+ "That doesn't appear to be a valid VLAN ID." 5 46
+ continue
+ else
+ VLAN=".`cat $TMP/reply`"
+ break
+ fi
+ else
+ break
+ fi
+ done
+fi
dialog --title "CONFIGURATION TYPE FOR '$HOSTNM.$DOMAIN'" \
--default-item NetworkManager \
@@ -378,15 +501,18 @@ dialog --title "CONFIGURATION TYPE FOR '$HOSTNM.$DOMAIN'" \
If you have an internal network card and an assigned IP address, gateway, \
and DNS, use the 'static IP' choice to enter these values. If your IP \
address is assigned by a DHCP server (commonly used by cable modem and DSL \
-services), select 'DHCP'. If you do not have a network card, select \
-the 'loopback' choice. You may also select 'NetworkManager' if you would \
-like to have the NetworkManager daemon automatically handle your wired and \
+services), select 'DHCP'. Select 'NetworkManager' if you would like to \
+have the NetworkManager daemon automatically handle your wired and \
wireless network interfaces (this is simple and usually works). \
-Which type of network setup would you like?" 20 70 4 \
-"static IP" "Use a static IP address to configure ethernet" \
-"DHCP" "Use a DHCP server to configure ethernet" \
-"loopback" "Set up a loopback connection (modem or no net)" \
-"NetworkManager" "Autoconfigure network using NetworkManager" 2> $TMP/reply
+IPv6 networks may also use SLAAC (Stateless Address Autoconfiguration) to \
+assign an address based on Router Advertisments. If you do not have a \
+network card, select the 'loopback' choice. \n\
+Which type of network setup would you like?" 22 77 5 \
+"static IP" "Use a static IPv4 or IPv6 address to configure ethernet" \
+"DHCP" "Use a DHCP (IPv4 or IPv6) server to configure ethernet" \
+"NetworkManager" "Autoconfigure network using NetworkManager" \
+"SLAAC" "Use SLAAC to configure ethernet (IPv6 only)" \
+"loopback" "Set up a loopback connection (modem or no net)" 2> $TMP/reply
if [ $? = 1 -o $? = 255 ]; then
rm -f $TMP/reply
exit
@@ -395,7 +521,27 @@ REPLY=`cat $TMP/reply`
rm -f $TMP/reply
if [ "$REPLY" = "DHCP" ]; then
- USE_DHCP="yes"
+ dialog --title "SELECT DHCP TYPE" --default-item "DHCPv4" --menu \
+"Please select the type of DHCP to use to configure your networking.
+Select 'DHCPv4' to configure for an IPv4 network (this is the most
+common type of network, and the safe choice). Select 'DHCPv6' for a
+pure IPv6 network, or 'Both' to try and set up both types of network." 13 73 3 \
+"DHCPv4" "An IPv4 based network, with no IPv6 configuration" \
+"DHCPv6" "An IPv6 based network, with no IPv4 configuration" \
+"Both" "A combination of IPv4 and IPv6 networks" 2>$TMP/reply
+ if [ $? = 1 -o $? = 255 ]; then
+ rm -f $TMP/reply
+ exit
+ fi
+ TYPE=`cat $TMP/reply`
+ if [ "$TYPE" = "DHCPv4" ]; then
+ USE_DHCP="yes"
+ elif [ "$TYPE" = "DHCPv6" ]; then
+ USE_DHCP6="yes"
+ else
+ USE_DHCP="yes"
+ USE_DHCP6="yes"
+ fi
dialog --title "SET DHCP HOSTNAME" --inputbox "Some network providers require \
that the DHCP hostname be set in order to connect. If so, they'll have assigned \
a hostname to your machine, which may look something like CC-NUMBER-A (this \
@@ -411,136 +557,252 @@ elif [ "$REPLY" = "loopback" ]; then
elif [ "$REPLY" = "NetworkManager" ]; then
LOOPBACK="yes"
NETWORKMANAGER="yes"
+elif [ "$REPLY" = "SLAAC" ]; then
+ LOOPBACK="no"
+ USE_SLAAC="yes"
else
LOOPBACK="no"
fi
-if [ "$LOOPBACK" = "no" -a ! "$USE_DHCP" = "yes" ]; then
-
- while [ 0 ]; do
- if [ -r $TMP/SeTIP ]; then
- IPADDR=`cat $TMP/SeTIP`
- fi
- cat << EOF > $TMP/tempmsg
-Enter your IP address for the local machine. Example:
-111.112.113.114
-Enter IP address for $HOSTNM (aaa.bbb.ccc.ddd):
-EOF
- dialog --title "ENTER IP ADDRESS FOR '$HOSTNM.$DOMAIN'" --inputbox \
-"`cat $TMP/tempmsg`" \
-10 68 $IPADDR 2> $TMP/SeTlip
- if [ $? = 1 -o $? = 255 ]; then
- rm -f $TMP/SeTlip $TMP/tempmsg
- exit
- fi
- IPADDR="`cat $TMP/SeTlip`"
- rm -f $TMP/SeTlip $TMP/tempmsg
- if [ "$IPADDR" = "" ]; then
- continue;
- fi
- syntax_check_color $IPADDR 4 WARN
- if [ $? = 0 ]; then
- echo $IPADDR > $TMP/SeTIP
- break;
- fi
- done
+if [ "$LOOPBACK" = "no" -a ! "$USE_DHCP" = "yes" -a ! "$USE_SLAAC" = "yes" ]; then
+ while [ 0 ]; do
+ while [ 0 ]; do
+ if [ -r $TMP/SeTIP ]; then
+ IPADDR=`cat $TMP/SeTIP`
+ fi
+ dialog --title "ENTER IPv4 ADDRESS FOR '$HOSTNM.$DOMAIN'" --inputbox \
+"Enter the IPv4 address for the local machine. Example: 111.112.113.114
+If you do not want to configure a static IPv4 address, just hit ENTER. " \
+ 9 75 $IPADDR 2> $TMP/SeTlip
+ if [ $? = 1 -o $? = 255 ]; then
+ rm -f $TMP/SeTlip
+ exit
+ fi
+ IPADDR="`cat $TMP/SeTlip`"
+ rm -f $TMP/SeTlip
+ if [ "$IPADDR" = "" ]; then
+ break
+ fi
+ syntax_check_color $IPADDR 4 WARN
+ if [ $? = 0 ]; then
+ echo $IPADDR > $TMP/SeTIP
+ break
+ fi
+ done
+
+ if [ ! "$IPADDR" = "" ]; then
+ while [ 0 ]; do
+ if [ -r $TMP/SeTnetmask ]; then
+ NETMASK=`cat $TMP/SeTnetmask`
+ fi
+ dialog --title "ENTER NETMASK FOR IPv4 NETWORK" --inputbox \
+"Enter the netmask for your IPv4 network.
+This will generally be a single number (eg, 24)
+or look something like this: 255.255.255.0." 10 55 $NETMASK 2> $TMP/SeTnmask
+ if [ $? = 1 -o $? = 255 ]; then
+ rm -f $TMP/SeTnmask
+ exit
+ fi
+ NETMASK="`cat $TMP/SeTnmask`"
+ rm -f $TMP/SeTnmask
+ if [ "$NETMASK" = "" ]; then
+ dialog --title "NETMASK REQUIRED" --msgbox \
+"You have configured this host with a v4
+IP address - a netmask is required." 6 43
+ continue
+ fi
+ if (($NETMASK == 0)) 2>/dev/null || (($NETMASK > 32)) 2>/dev/null; then
+ dialog --title "NETMASK INVALID" --msgbox \
+"The netmask you entered is not valid.
+Valid netmasks will be in the range 1-32." 6 45
+ continue
+ elif (($NETMASK)) 2>/dev/null; then
+ echo $NETMASK > $TMP/SeTnetmask
+ break
+ else
+ syntax_check_color $NETMASK 4 WARN
+ if [ $? = 0 ]; then
+ echo $NETMASK > $TMP/SeTnetmask
+ break
+ fi
+ fi
+ done
+ while [ 0 ]; do
+ if [ -r $TMP/SeTgateway ]; then
+ GATEWAY=`cat $TMP/SeTgateway`
+ fi
+ dialog --title "ENTER IPv4 GATEWAY ADDRESS" --inputbox \
+"Enter the address for the IPv4 gateway on your network, such as:
+ `echo $IPADDR | cut -f 1-3 -d .`.1
+
+If you don't have an IPv4 gateway on your network just hit ENTER
+without entering a gateway IP address.
- while [ 0 ]; do
- if [ -r $TMP/SeTnetmask ]; then
- NETMASK=`cat $TMP/SeTnetmask`
- fi
- cat << EOF > $TMP/tempmsg
-Enter your netmask. This will generally look something
-like this: 255.255.255.0
-Enter netmask (aaa.bbb.ccc.ddd):
-EOF
- dialog --title "ENTER NETMASK FOR LOCAL NETWORK" --inputbox \
-"`cat $TMP/tempmsg`" \
-10 65 $NETMASK 2> $TMP/SeTnmask
- if [ $? = 1 -o $? = 255 ]; then
- rm -f $TMP/SeTnmask $TMP/tempmsg
- exit
- fi
- NETMASK="`cat $TMP/SeTnmask`"
- rm -f $TMP/SeTnmask $TMP/tempmsg
- if [ "$NETMASK" = "" ]; then
- continue;
- fi
- syntax_check_color $NETMASK 4 WARN
- if [ $? = 0 ]; then
- echo $NETMASK > $TMP/SeTnetmask
- break;
- fi
- done
-
- # Set broadcast/network addresses automatically:
- BROADCAST=`ipmask $NETMASK $IPADDR | cut -f 1 -d ' '`
- NETWORK=`ipmask $NETMASK $IPADDR | cut -f 2 -d ' '`
-
- while [ 0 ]; do
- if [ -r $TMP/SeTgateway ]; then
- GATEWAY=`cat $TMP/SeTgateway`
- fi
- cat << EOF > $TMP/tempmsg
-Enter the address for the gateway on your network, such as:
-`echo $IPADDR | cut -f 1-3 -d .`.1
+Enter IPv4 gateway address (aaa.bbb.ccc.ddd):" 14 68 $GATEWAY 2> $TMP/SeTgate
+ if [ $? = 1 -o $? = 255 ]; then
+ rm -f $TMP/SeTgate
+ exit
+ fi
+ GATEWAY="`cat $TMP/SeTgate`"
+ rm -f $TMP/SeTgate
+ if [ "$GATEWAY" = "" ]; then
+ echo > $TMP/SeTgateway
+ break
+ fi
+ syntax_check_color $GATEWAY 4 WARN
+ if [ $? = 0 ]; then
+ echo $GATEWAY > $TMP/SeTgateway
+ break
+ fi
+ done
+ fi
-If you don't have a gateway on your network just hit ENTER
+ while [ 0 ]; do
+ if [ -r $TMP/SeTIP6 ]; then
+ IPADDR6=`cat $TMP/SeTIP6`
+ fi
+ dialog --title "ENTER IPv6 ADDRESS FOR '$HOSTNM.$DOMAIN'" --inputbox \
+"Enter the IPv6 address for the local machine.
+Example: fe80:426c:ffff::365a
+If you do not want to configure a static IPv6 address, just hit ENTER." \
+ 10 74 $IPADDR6 2> $TMP/SeTlip6
+ if [ $? = 1 -o $? = 255 ]; then
+ rm -f $TMP/SeTlip6
+ exit
+ fi
+ IPADDR6="`cat $TMP/SeTlip6`"
+ rm -f $TMP/SeTlip6
+ if [ "$IPADDR6" = "" ]; then
+ if [ "$IPADDR" = "" ]; then
+ dialog --title "NO IP ADDRESSES" --yesno \
+"You have not configured any IP addresses for your system.
+Are you sure you want to proceed with no IPs?" 6 61
+ if [ $? = 0 ]; then
+ break 2
+ else
+ continue 2
+ fi
+ fi
+ else
+ # We can only do a basic validation of the entered address
+ # as regexes for IPv6 addresses are very complex.
+ if echo "$IPADDR6" | grep -E "^[0-9a-fA-F:]+$" >/dev/null; then
+ echo $IPADDR6 > $TMP/SeTIP6
+ break
+ else
+ dialog --title "INVALID IP ADDRESS" --msgbox \
+"The IP address you entered is not valid.
+Please enter a valid IPv6 address." 6 44
+ continue
+ fi
+ fi
+ done
+
+ if [ ! "$IPADDR6" = "" ]; then
+ while [ 0 ]; do
+ if [ -r $TMP/SeTprefix6 ]; then
+ PREFIX6=`cat $TMP/SeTprefix6`
+ fi
+ dialog --title "ENTER IPv6 PREFIX FOR LOCAL NETWORK" --inputbox \
+"Enter your IPv6 prefix length.
+This will be a single number (eg, 64)" 9 55 $PREFIX6 2> $TMP/SeTprefix6
+ if [ $? = 1 -o $? = 255 ]; then
+ rm -f $TMP/SeTprefix6
+ exit
+ fi
+ PREFIX6="`cat $TMP/SeTprefix6`"
+ if [ "$PREFIX6" = "" ]; then
+ dialog --title "PREFIX REQUIRED" --msgbox \
+"You have configured this host with a v6
+IP address - a prefix is required." 6 43
+ continue
+ elif (($PREFIX6 == 0)) 2>/dev/null || (($PREFIX6 > 128)) 2>/dev/null || \
+ ! (($PREFIX6)) 2>/dev/null; then
+ dialog --title "PREFIX INVALID" --msgbox \
+"The prefix you entered is not valid.
+Valid prefixes will be in the range 1-128." \
+6 46
+ continue
+ else
+ echo $PREFIX6 >$TMP/SeTprefix6
+ break
+ fi
+ done
+
+ while [ 0 ]; do
+ if [ -r $TMP/SeTgateway6 ]; then
+ GATEWAY6=`cat $TMP/SeTgateway6`
+ fi
+ dialog --title "ENTER IPv6 GATEWAY ADDRESS" --inputbox \
+"Enter the address for the IPv6 gateway on your network, such as:
+ fe80:426c:ffff::1
+
+If you don't have an IPv6 gateway on your network just hit ENTER
without entering a gateway IP address.
-Enter gateway address (aaa.bbb.ccc.ddd):
-EOF
- dialog --title "ENTER GATEWAY ADDRESS" --inputbox "`cat $TMP/tempmsg`" \
- 14 64 $GATEWAY 2> $TMP/SeTgate
- if [ $? = 1 -o $? = 255 ]; then
- rm -f $TMP/SeTgate $TMP/tempmsg
- exit
- fi
- GATEWAY="`cat $TMP/SeTgate`"
- rm -f $TMP/SeTgate $TMP/tempmsg
- if [ "$GATEWAY" = "" ]; then
- echo > $TMP/SeTgateway
- break;
- fi
- syntax_check_color $GATEWAY 4 WARN
- if [ $? = 0 ]; then
- echo $GATEWAY > $TMP/SeTgateway
- break;
- fi
- done
+Enter IPv6 gateway address:" 14 68 $GATEWAY6 2> $TMP/SeTgate6
+ if [ $? = 1 -o $? = 255 ]; then
+ rm -f $TMP/SeTgate6
+ exit
+ fi
+ GATEWAY6="`cat $TMP/SeTgate6`"
+ rm -f $TMP/6SeTgate6
+ if [ "$GATEWAY6" = "" ]; then
+ echo > $TMP/SeTgateway6
+ break 2
+ fi
+ # We can only do a basic validation of the entered address
+ # as regexes for IPv6 addresses are very complex.
+ if echo "$GATEWAY6" | grep -E "^[0-9a-fA-F:]+$" >/dev/null; then
+ echo $GATEWAY6 > $TMP/SeTgateway6
+ break 2
+ else
+ dialog --title "INVALID IP ADDRESS" --msgbox \
+"The IP address you entered is not valid.
+Please enter a valid IPv6 address." 6 44
+ continue
+ fi
+ echo $GATEWAY6 > $TMP/SeTgateway6
+ done
+ fi
+ done
fi
if [ "$LOOPBACK" = "no" ]; then
- dialog --title "USE A NAMESERVER?" --yesno "Will you be accessing a \
-nameserver?" 5 42
+ dialog --title "USE A NAMESERVER?" --yesno "Do you wish to configure \
+a nameserver?" 5 42
if [ $? = 0 ]; then
- if [ ! "`cat $TMP/SeTns 2> /dev/null`" = "" ]; then
- DNSSAMPLE="`cat $TMP/SeTns 2> /dev/null`"
- elif [ "$GATEWAY" = "" ]; then
- DNSSAMPLE=`echo $IPADDR | cut -f 1-3 -d .`
- else
- DNSSAMPLE=$GATEWAY
+ if [ ! "$IPADDR" = "" ]; then
+ if [ ! "$GATEWAY" = "" ]; then
+ DNSSAMPLE="$GATEWAY"
+ DNSDEFAULT="$GATEWAY"
+ else
+ DNSSAMPLE="`echo $IPADDR | cut -f 1-3 -d .`.1"
+ fi
+ fi
+ if [ ! "$IPADDR6" = "" ]; then
+ if [ ! "$GATEWAY6" = "" ]; then
+ DNSSAMPLE="$DNSSAMPLE or $GATEWAY6"
+ # Keep the v4 nameserver the default, for now.
+ # DNSDEFAULT="$GATEWAY6"
+ else
+ DNSSAMPLE="or fe80:426c:ffff::1"
+ fi
fi
while [ "$NAMESERVER" = "" ]; do
- cat << EOF > $TMP/tempmsg
-Here is your current IP address, full hostname, and base hostname:
-$IPADDR $HOSTNM.$DOMAIN $HOSTNM
-
-Please give the IP address of the name server to use,
-such as $DNSSAMPLE.
+ dialog --title "ENTER NAMESERVER IP ADDRESS" --inputbox \
+"Please give the IP address of the name server to use, such as
+ $DNSSAMPLE
+You can add more Domain Name Servers later by editing
+ /$RESOLV.
-You can add more Domain Name Servers later by editing /$RESOLV.
-
-Primary name server to use (aaa.bbb.ccc.ddd):
-EOF
- dialog --title "SELECT NAMESERVER" --inputbox \
-"`cat $TMP/tempmsg`" 17 72 $DNSSAMPLE 2> $TMP/SeTns
+Primary name server to use:" 13 65 $DNSDEFAULT 2> $TMP/SeTns
if [ $? = 1 -o $? = 255 ]; then
- rm -f $TMP/tempmsg $TMP/SeTns
+ rm -f $TMP/SeTns
break
fi
NAMESERVER="`cat $TMP/SeTns`"
- rm -f $TMP/tempmsg $TMP/SeTns
+ rm -f $TMP/SeTns
done
fi
fi
@@ -624,7 +886,7 @@ system is now configured to use loopback:
IP address: 127.0.0.1
Netmask: 255.255.255.0
-Is this correct? Press 'Yes' to continue, or 'No' to reconfigure." 0 0
+Is this correct? Press 'Yes' to continue, or 'No' to reconfigure." 10 70
RETVAL=$?
elif [ "$LOOPBACK" = "yes" -a "$NETWORKMANAGER" = "yes" ]; then
dialog --title "NETWORK SETUP COMPLETE" --yesno "Your networking \
@@ -633,24 +895,29 @@ wired and wireless network management. To set up wireless networks
and view status, add the Network Management control panel widget to
your KDE desktop.
-Is this correct? Press 'Yes' to confirm, or 'No' to reconfigure." 0 0
+Is this correct? Press 'Yes' to confirm, or 'No' to reconfigure." 10 71
RETVAL=$?
-elif [ "$USE_DHCP" = "" ]; then
+elif [ "$USE_SLAAC" = "yes" ]; then
+ dialog --title "NETWORK SETUP COMPLETE" --yesno \
+"Your system is now set up to autoconfigure an IPv6 IP address.
+If this is correct, hit 'Yes' to confirm, or 'No' to cancel." 6 66
+RETVAL=$?
+elif [ "$USE_DHCP" = "" -a "$USE_DHCP6" = "" ]; then
while [ 0 ]; do
dialog --title "CONFIRM NETWORK SETUP" \
---ok-label Accept \
---extra-label Edit \
---cancel-label Restart \
---inputmenu \
+--ok-label Accept --extra-label Edit --cancel-label Restart --inputmenu \
"These are the settings you have entered. To accept them and complete \
-the networking setup, press enter. If you need to make any changes, you \
-can do that now (or reconfigure later using 'netconfig')." \
-22 60 12 \
+the networking setup, press ENTER. If you need to make any changes, you \
+can do that now using 'Edit' (or reconfigure later using 'netconfig')." \
+24 75 15 \
"Hostname:" "$HOSTNM" \
-"Domain name:" "$DOMAIN" \
-"IP address:" "$IPADDR" \
-"Netmask:" "$NETMASK" \
-"Gateway:" "$GATEWAY" \
+"Domain Name:" "$DOMAIN" \
+"IPv4 Address:" "$IPADDR" \
+"IPv4 Netmask:" "$NETMASK" \
+"IPv4 Gateway:" "$GATEWAY" \
+"IPv6 Address:" "$IPADDR6" \
+"IPv6 Prefix:" "$PREFIX6" \
+"IPv6 Gateway:" "$GATEWAY6" \
"Nameserver:" "$NAMESERVER" 2> $TMP/tempmsg
RETVAL=$?
if [ "$RETVAL" = "3" ]; then
@@ -658,14 +925,20 @@ can do that now (or reconfigure later using 'netconfig')." \
NEWVAL=`cat $TMP/tempmsg | cut -f 2 -d : | cut -f 2- -d ' '`
if [ "$FIELD" = "Hostname" ]; then
HOSTNM=$NEWVAL
- elif [ "$FIELD" = "Domain name" ]; then
+ elif [ "$FIELD" = "Domain Name" ]; then
DOMAIN=$NEWVAL
- elif [ "$FIELD" = "IP address" ]; then
+ elif [ "$FIELD" = "IPv4 Address" ]; then
IPADDR=$NEWVAL
- elif [ "$FIELD" = "Netmask" ]; then
+ elif [ "$FIELD" = "IPv4 Netmask" ]; then
NETMASK=$NEWVAL
- elif [ "$FIELD" = "Gateway" ]; then
+ elif [ "$FIELD" = "IPv4 Gateway" ]; then
GATEWAY=$NEWVAL
+ elif [ "$FIELD" = "IPv6 Address" ]; then
+ IPADDR6=$NEWVAL
+ elif [ "$FIELD" = "IPv6 Prefix" ]; then
+ PREFIX6=$NEWVAL
+ elif [ "$FIELD" = "IPv6 Gateway" ]; then
+ GATEWAY6=$NEWVAL
elif [ "$FIELD" = "Nameserver" ]; then
NAMESERVER=$NEWVAL
fi
@@ -674,17 +947,18 @@ can do that now (or reconfigure later using 'netconfig')." \
fi
done
else # DHCP was used
- dialog --title "CONFIRM SETUP COMPLETE" \
+ dialog --title "CONFIRM NETWORK SETUP" \
--yesno "Your networking system is now configured to use DHCP:
- Hostname: $HOSTNM
+ Hostname: $HOSTNM
Domain name: $DOMAIN
- IP address: (use DHCP server)
- Netmask: (use DHCP server)
- Gateway: (use DHCP server)
- Nameserver: (use DHCP server)
+ DHCP hostname: $DHCP_HOSTNAME
+ IP addresses: (use DHCP server)
+ Netmask & Prefix: (use DHCP server)
+ Gateways: (use DHCP server)
+ Nameserver: (use DHCP server)
-Is this correct? Press 'Yes' to continue, or 'No' to reconfigure." 0 0
+Is this correct? Press 'Yes' to continue, or 'No' to reconfigure." 15 76
RETVAL=$?
fi
@@ -709,4 +983,3 @@ else
fi
exit $RETVAL
-