summaryrefslogtreecommitdiff
path: root/source/l/netpbm/Makefile.config
diff options
context:
space:
mode:
Diffstat (limited to 'source/l/netpbm/Makefile.config')
-rw-r--r--source/l/netpbm/Makefile.config649
1 files changed, 0 insertions, 649 deletions
diff --git a/source/l/netpbm/Makefile.config b/source/l/netpbm/Makefile.config
deleted file mode 100644
index d9bf909d..00000000
--- a/source/l/netpbm/Makefile.config
+++ /dev/null
@@ -1,649 +0,0 @@
-####This file was automatically created by 'configure.'
-####Many variables are set twice -- a generic setting, then
-####a system-specific override at the bottom of the file.
-####
-# This is a make file inclusion, to be included in all the Netpbm make
-# files.
-
-# This file is meant to contain variable settings that customize the
-# build for a particular target system configuration.
-
-# The distribution contains the file Makefile.config.in. You edit
-# Makefile.config.in in ways relevant to your particular environment
-# to create Makefile.config. The "configure" program will do this
-# for you in simple cases.
-
-# Some of the variables that the including make file must set for this
-# file to work:
-#
-# SRCDIR: The directory at the top of the Netpbm source tree. Note that
-# this is typically a relative directory, and it must be relative to the
-# make file that includes this file.
-
-DEFAULT_TARGET = nonmerge
-#DEFAULT_TARGET = merge
-
-# Fiasco has some special requirements that make it fail to compile on
-# some systems, and since it isn't very important, just set this to "N"
-# and skip it on those systems unless you want to debug it and fix it.
-# OpenBSD:
-#BUILD_FIASCO = N
-BUILD_FIASCO = Y
-
-# The following are commands for the build process to use. These values
-# do not get built into anything.
-
-# The C compiler (including macro preprocessor)
-#CC = gcc
-# Note that 'cc' is usually an alias for whatever is the main compiler
-# on a system, e.g. the GNU Compiler on Linux.
-CC = cc
-
-# The linker.
-LD = $(CC)
-#LD = ld
-#Tru64:
-#LD = cc
-#LD = gcc
-
-#If the linker identified above is a compiler that invokes a linker
-#(as in 'cc foo.o -o foo'), set LINKERISCOMPILER. The main difference is
-#that we expect a compiler to take linker options in the '-Wl,-opt1,val1'
-#syntax whereas the actual linker would take '-opt1 val1'.
-LINKERISCOMPILER=Y
-#If $(LD) is 'ld':
-#LINKERISCOMPILER=N
-
-#LINKER_CAN_DO_EXPLICIT_LIBRARY means the linker specified above can
-#take a library as just another link object argument, as in 'ld
-#pnmtojpeg.o /usr/local/lib/libjpeg.so ...' as opposed to requiring a
-#-l option as in 'ld pnmtojpeg.o -L/usr/local/lib -l jpeg'.
-#This variable controls how 'libopt' gets built. Note that with some
-#linkers, you can specify a shared library explicitly, but then it has
-#to live in that exact place at run time. That's not good enough for us.
-
-LINKER_CAN_DO_EXPLICIT_LIBRARY=N
-#GNU:
-#LINKER_CAN_DO_EXPLICIT_LIBRARY=Y
-
-# This is the name of the header file that declares the types
-# uint32_t, etc. This name is used as #include $(INTTYPES_H) .
-# Set to null if the types come automatically without including anything.
-
-# We have a report (2005.09.17) that on IRIX 5.3 with the native IDO
-# cc, inttypes.h and sys/types.h conflict (and Netpbm programs include
-# sys/types for other things), so for that environment, <inttypes.h>
-# won't work, but "inttypes_netpbm.h" might.
-
-INTTYPES_H = <inttypes.h>
-# Linux libc5:
-#INTTYPES_H = <types.h>
-# Solaris:
-# Solaris has <sys/inttypes.h>, but it doesn't define int_fast2_t, etc.
-#INTTYPES_H = "inttypes_netpbm.h"
-# Others:
-#INTTYPES_H = <sys/stdint.h>
-#INTTYPES_H = <sys/types.h>
-# The automatically generated Netpbm version:
-#INTTYPES_H = "inttypes_netpbm.h"
-
-# HAVE_INT64 tells whether, assuming you include the header indicated by
-# INTTYPES_H, you have the int64_t type and related stuff. (If you don't
-# the build will omit certain code that does 64 bit computations).
-HAVE_INT64 = Y
-#HAVE_INT64 = N
-
-# CC and LD are for building the Netpbm programs, which are not necessarily
-# intended to run on the same system on which Make is running. But when we
-# build a build tool such as Libopt, it is meant to run only on the same
-# system on which the Make is running. The variables below define programs
-# to use to compile and link build tools.
-CC_FOR_BUILD = $(CC)
-LD_FOR_BUILD = $(LD)
-CFLAGS_FOR_BUILD = $(CFLAGS)
-
-# MAKE is set automatically by Make to what was used to invoke Make.
-
-INSTALL = $(SRCDIR)/buildtools/install.sh
-#Solaris:
-#INSTALL = /usr/ucb/install
-#Tru64:
-#INSTALL = installbsd
-#OSF1:
-#INSTALL = $(SRCDIR)/buildtools/installosf
-#Red Hat Linux:
-#INSTALL = install
-
-# STRIPFLAG is the option you pass to the above install program to make it
-# strip unnecessary information out of binaries.
-STRIPFLAG = -s
-# If you don't want to strip the binaries, just leave it null:
-#STRIPFLAG =
-
-SYMLINK = ln -s
-# At least some Windows environments don't have any concept of symbolic
-# links, but direct copies are usually a passable alternative.
-#SYMLINK = cp
-
-#MANPAGE_FORMAT is "nroff" or "cat". It determines in what format the
-#pointer man pages are installed (ready to nroff, or ready to cat).
-#A pointer man pages is just a single-paragraph pages that tells you there is
-#no man page for the program, to look at the HTML documentation instead.
-MANPAGE_FORMAT = nroff
-#MANPAGE_FORMAT = cat
-
-AR = ar
-RANLIB = ranlib
-# IRIX, SCO don't have Ranlib:
-#RANLIB = true
-
-# LEX is the beginning of a shell command that runs a Lex-like
-# pattern matcher generator. Null string means there isn't any such
-# command. That means the build will skip parts that need one.
-
-LEX = flex
-# Solaris:
-# LEX = flex -e
-# Windows Mingw:
-# LEX =
-#
-# LEX = lex
-
-# C compiler options
-
-# gcc:
-# -ansi and -Werror should work too, but are not included
-# by default because there's no point in daring the build to fail.
-# -pedantic isn't a problem because it causes at worst a warning.
-#CFLAGS = -O3 -ffast-math -pedantic -fno-common \
-# -Wall -Wno-uninitialized -Wmissing-declarations -Wimplicit \
-# -Wwrite-string -Wmissing-prototypes -Wundef
-# The merged programs have a main_XXX subroutine instead of main(),
-# which would cause a warning with -Wmissing-declarations or
-# -Wmissing-prototypes.
-#CFLAGS_MERGE = -Wno-missing-declarations -Wno-missing-prototypes
-# A user of DEC Tru64 4.0F in May 2000 needed -DLONG_32 for ppmtompeg,
-# but word size-sensitive code was removed from parallel.c in September 2004.
-# A user of Tru64 5.1A in July 2003 needed NOT to have -DLONG_32. In
-# theory, you need this if on your system, long is 32 bits and int is not.
-# But it may be completely irrelevant today.
-#Tru64:
-#CFLAGS = -O2 -std1 -DLONG_32
-#CFLAGS = -O2 -std1
-#AIX:
-#CFLAGS= -O3
-#HP-UX:
-#CFLAGS= -O3 -fPIC
-#IRIX:
-#CFLAGS= -n32 -O3
-#Amiga with GNU compiler:
-#CFLAGS= -m68020-60 -ffast-math -mstackextend
-# You can add -noixemul for Amiga and successfully compile most of the
-# programs. (Of the remaining ones, if you can supply your own strtod()
-# function, most of them will build with -noixemul). So try building
-# with 'make --keep-going CADD=-noixemul' first, then just 'make' to build
-# everything that failed for lack of the ixemul library in the first step.
-# That way, the parts that don't required the ixemul library won't indicate
-# a dependency on it.
-#OpenBSD:
-#CFLAGS = -I/usr/local/include
-
-# EXE is a suffix that the linker puts on any executable it generates.
-# In cygwin, this is .exe and most programs deal with its existence without
-# us having to know about it. Some don't though, so set this:
-
-EXE =
-#Cygwin, DJGPP/Windows:
-#EXE = .exe
-
-# linker options.
-
-# LDFLAGS is often set as an environment variable; A setting here overrides
-# it. So either make sure you want to override it, or do a "LDFLAGS +=" here.
-
-# LDFLAGS is usually not the right place for a -L option, because we put
-# LDFLAGS _before_ our own -L options, so it would cancel out our
-# specific selection of libraries. For example, if you say
-# LDFLAGS=/usr/local/lib and an old copy of the libnetpbm is in
-# /usr/local/lib, then you'd be linking against that old copy instead of
-# the copy you just built, which is located by a -L option later on the
-# link command. LIBS is the right variable for adding -L options. LIBS
-# goes after any of our make files' own -L options.
-
-# Eunice users may want to use -noshare so that the executables can
-# run standalone:
-#LDFLAGS += -noshare
-#Tru64:
-# Russ Allberry says on 2001.06.09 that -oldstyle_liblookup may be necessary
-# to keep from finding an ancient system libjpeg.so that isn't compatible with
-# NetPBM. Michael Long found that /usr/local/lib is not in the default
-# search path, or not soon enough, and he was getting an old libjpeg that
-# caused all the jpeg symbol references to be unresolved. He had installed
-# a new libjpeg in /usr/local/lib.
-#LDFLAGS += -call_shared -oldstyle_liblookup -L/usr/local/lib
-#AIX:
-#LDFLAGS += -L /usr/pubsw/lib
-#HP-UX:
-#LDFLAGS += -Wl,+b,/usr/pubsw/lib
-#IRIX:
-#LDFLAGS += -n32
-
-# Linker options for created Netpbm shared libraries.
-
-# Here, $(SONAME) resolves to the soname for the shared library being created.
-# The following are gcc options. This works on GNU libc systems.
-LDSHLIB = -shared -Wl,-soname,$(SONAME)
-# You need -nostart instead of -shared on BeOS. Though the BeOS compiler is
-# ostensibly gcc, it has the -nostart option, which is not mentioned in gcc
-# documentation and doesn't exist in at least one non-BeOS installation.
-# BeOS doesn't have sonames built in.
-#LDSHLIB = -nostart
-#LDSHLIB = -G
-# Solaris, SunOS with GNU Ld, SCO:
-# These systems have no soname option.
-#LDSHLIB = -shared
-# Solaris with Sun Ld:
-#LDSHLIB = -Wl,-Bdynamic,-G,-h,$(SONAME)
-#Tru64:
-#LDSHLIB = -shared -expect_unresolved "*"
-#IRIX:
-#LDSHLIB = -shared -n32
-#AIX GNU compiler/linker:
-#LDSHLIB = -shared
-#AIX Visual Age C:
-#LDSHLIB = -qmkshrobj
-
-# LDRELOC is the command to combine two .o files (relocateable object files)
-# into a single .o file that can later be linked into something else. NONE
-# means no such command is available.
-
-LDRELOC = NONE
-# GNU Ld:
-# Older GNU Ld misspells the option as --relocateable. Newer GNU Ld
-# correctly spells it --relocatable. The abbreviation --reloc works on
-# both.
-#LDRELOC = ld --reloc
-#LDRELOC = ld -r
-
-
-# On older systems, you have to make shared libraries out of position
-# independent code, so you need -fpic or fPIC here. (The rule is: if
-# -fpic works, use it. If it bombs, go to fPIC). On newer systems,
-# it isn't necessary, but can save real memory at the expense of
-# execution speed. Without position independent code, the library
-# loader may have to patch addresses into the executable text. On an
-# older system, this would cause a program crash because the loader
-# would be writing into read-only shared memory. But on newer
-# systems, the system silently creates a private mapping of the page
-# or segment being modified (the "copy on write" phenomenon). So it
-# needs its own private real page frame. In one experiment, A second
-# copy of Pbmtext used 16K less real memory when built with -fpic than
-# when built without. 2001.06.02.
-
-# We have seen -fPIC required on IA64 and AMD64 machines (GNU
-# compiler/linker). Build-time linking fails without it. I don't
-# know why -- history seems to be repeating itself. 2005.02.23.
-
-CFLAGS_SHLIB =
-# Solaris or SunOS with gcc, and NetBSD:
-#CFLAGS_SHLIB = -fpic
-#CFLAGS_SHLIB = -fPIC
-# Sun compiler:
-#CFLAGS_SHLIB = -Kpic
-#CFLAGS_SHLIB = -KPIC
-
-# SHLIB_CLIB is the link option to include the C library in a shared library,
-# normally "-lc". On typical systems, this serves no purpose. On some,
-# though, it causes information about which C library to use to be recorded
-# in the shared library and thus choose the correct library among several or
-# avoid using an incompatible one. But on some systems, the link fails.
-# On 2002.09.30, "John H. DuBois III" <spcecdt@armory.com> reports that on
-# SCO OpenServer, he gets the following error message with -lc:
-#
-# -lc; relocations referenced ; from file(s) /usr/ccs/lib/libc.so(random.o);
-# fatal error: relocations remain against allocatable but non-writable
-# section: ; .text
-
-SHLIB_CLIB = -lc
-# SCO:
-SHLIB_CLIB =
-
-# On some systems you have to build into an executable the list of
-# directories where its dynamically linked libraries can be found at
-# run time. This is typically done with a -R or -rpath linker
-# option. Even on systems that don't require it, you might prefer to do
-# that rather than set up environment variables or configuration files
-# to tell the system where the libraries are. A "Y" here means to put
-# the directory information in the executable at link time.
-
-NEED_RUNTIME_PATH = N
-# Solaris, SunOS, NetBSD, AIX:
-#NEED_RUNTIME_PATH = Y
-
-# RPATHOPTNAME is the option you use on the link command to specify
-# a runtime search path for a shared library. It is meaningless unless
-# NEED_RUNTIME_PATH is Y.
-RPATHOPTNAME = -rpath
-
-# The following variables tell where your various libraries on which
-# Netpbm depends live. The LIBxxx variable is a full file
-# specification of the link library (not necessarily the library used
-# at run time). e.g. "/usr/local/lib/graphics/libjpeg.so". It usually
-# doesn't matter if the library prefix and suffix are right -- you can
-# use "lib" and ".so" or ".a" regardless of what your system actually
-# uses because these just turn into "-L" and "-l" linker options
-# anyway. ".a" implies a static library for some purposes, though.
-# If you don't have the library in question, use a value of NONE for
-# LIBxxx and the build will simply skip the programs that require that
-# library. If the library is in your linker's (or the Netpbm build's)
-# default search path, leave off the directory part, e.g. "libjpeg.so".
-
-# The xxxHDR_DIR variable is the directory in which the interface
-# headers for the library live (e.g. /usr/include). If they are in your
-# compiler's default search path, set this variable to null.
-
-# This is where the Netpbm shared libraries will reside when Netpbm is
-# fully installed. In some configurations, the Netpbm builder builds
-# this information into the Netpbm executables. This does NOT affect
-# where the Netpbm installer installs the libraries. A null value
-# means the libraries are in a default search path used by the runtime
-# library loader.
-NETPBMLIB_RUNTIME_PATH =
-#NETPBMLIB_RUNTIME_PATH = /usr/lib/netpbm
-
-# The TIFF library. See above. If you want to build the tiff
-# converters, you must have the tiff library already installed.
-
-TIFFLIB = NONE
-TIFFHDR_DIR =
-
-#TIFFLIB = libtiff.so
-#TIFFHDR_DIR = /usr/include/libtiff
-#NetBSD:
-#TIFFLIB = $(LOCALBASE)/lib/libtiff.so
-#TIFFHDR_DIR = $(LOCALBASE)/include
-# OSF, Tru64:
-#TIFFLIB = /usr/local1/DEC/lib/libtiff.so
-#TIFFHDR_DIR = /usr/local1/DEC/include
-
-# Some TIFF libraries do Jpeg and/or Z (flate) compression and thus any
-# program linked with the TIFF library needs a Jpeg and/or Z library.
-# Some TIFF libraries have such library statically linked in, but others
-# need it to be dynamically linked at program load time.
-# Make this 'N' if youf TIFF library doesn't need such dynamic linking.
-# As of 2005.01, the most usual build of the TIFF library appears to require
-# both.
-TIFFLIB_NEEDS_JPEG = Y
-TIFFLIB_NEEDS_Z = Y
-
-# The JPEG library. See above. If you want to build the jpeg
-# converters you must have the jpeg library already installed.
-
-# Tiff files can use JPEG compression, so the Tiff library can reference
-# the JPEG library. If your Tiff library references a dynamic JPEG
-# library, you must specify at least JPEGLIB here, or the Tiff
-# converters will not build. Note that your Tiff library may have the
-# JPEG stuff statically linked in, in which case you won't need
-# JPEGLIB in order to build the Tiff converters.
-
-JPEGLIB = NONE
-JPEGHDR_DIR =
-#JPEGLIB = libjpeg.so
-#JPEGHDR_DIR = /usr/include/jpeg
-# Netbsd:
-#JPEGLIB = ${LOCALBASE}/lib/libjpeg.so
-#JPEGHDR_DIR = ${LOCALBASE}/include
-# OSF, Tru64:
-#JPEGLIB = /usr/local1/DEC/libjpeg.so
-#JPEGHDR_DIR = /usr/local1/DEC/include
-# Typical:
-#JPEGLIB = /usr/local/lib/libjpeg.so
-#JPEGHDR_DIR = /usr/local/include
-# Don't build JPEG stuff:
-#JPEGLIB = NONE
-
-
-# The PNG library. See above. If you want to build the PNG
-# converters you must have the PNG library already installed.
-
-# The PNG library, by convention starting around April 2002, gets installed
-# with names that include a version number, such as libpng10.a and header
-# files in /usr/include/libpng10. But there is conventionally an unnumbered
-# alias (e.g. libpng.a, /usr/include/libpng) for the preferred version.
-#
-# Recent versions of the library (since some time in the 2002-2006 period)
-# have an associated 'libpng-config' that tells how to link it. The make
-# files will use that program if it exists (must be in the PATH). In that
-# case, PNGLIB and PNGHDR_DIR are irrelevant, but PNGVER is still meaningful,
-# because the make file runs 'libpng$(PNGVER)-config'.
-
-PNGLIB = NONE
-PNGHDR_DIR =
-PNGVER =
-#PNGLIB = libpng$(PNGVER).so
-#PNGHDR_DIR = /usr/include/libpng$(PNGVER)
-# NetBSD:
-#PNGLIB = $(LOCALBASE)/lib/libpng$(PNGVER).so
-#PNGHDR_DIR = $(LOCALBASE)/include
-# OSF/Tru64:
-#PNGLIB = /usr/local1/DEC/lib/libpng$(PNGVER).so
-#PNGHDR_DIR = /usr/local1/DEC/include
-
-# The zlib compression library. See above. You need it to build
-# anything that needs the PNG library (see above). If you selected
-# NONE for the PNG library, it doesn't matter what you specify here --
-# it won't get used.
-#
-# If you have 'libpng-config' (see above), these are irrelevant.
-
-ZLIB = NONE
-ZHDR_DIR =
-#ZLIB = libz.so
-
-# The JBIG lossless image compression library (aka JBIG-KIT):
-
-JBIGLIB = $(BUILDDIR)/converter/other/jbig/libjbig.a
-JBIGHDR_DIR = $(SRCDIR)/converter/other/jbig
-
-# The Jasper JPEG-2000 image compression library (aka JasPer):
-JASPERLIB = $(INTERNAL_JASPERLIB)
-JASPERHDR_DIR = $(INTERNAL_JASPERHDR_DIR)
-# JASPERDEPLIBS is the libraries (-l options or file names) on which
-# The Jasper library depends -- i.e. what you have to link into any
-# executable that links in the Jasper library.
-JASPERDEPLIBS =
-#JASPERDEPLIBS = -ljpeg
-
-# And the Utah Raster Toolkit (aka URT aka RLE) library:
-
-URTLIB = $(BUILDDIR)/urt/librle.a
-URTHDR_DIR = $(SRCDIR)/urt
-
-# The X11 library has facilities for talking to an X Window System
-# server. It is required by Pamx.
-
-X11LIB = NONE
-X11HDR_DIR =
-
-#X11LIB = /usr/lib/libX11.so
-#X11HDR_DIR =
-
-# The Linux SVGA library (Svgalib) is a facility for displaying graphics
-# on the Linux console. It is required by Ppmsvgalib.
-
-LINUXSVGALIB = NONE
-LINUXSVGAHDR_DIR =
-
-#LINUXSVGALIB = /usr/lib/libvga.so
-#LINUXSVGAHDR_DIR = /usr/include/vgalib
-
-# If you don't want any network functions, set OMIT_NETWORK to "y".
-# The only thing that requires network functions is the option in
-# ppmtompeg to run it on multiple computers simultaneously. On some
-# systems network functions don't work or we haven't figured out how to
-# make them work, or they just aren't worth the effort.
-OMIT_NETWORK =
-#DJGPP/Windows, Tru64:
-# (there's some minor header problem that prevents network functions from
-# building on Tru64 2000.10.06)
-#OMIT_NETWORK = y
-
-# These are -l options to link in the network libraries. Often, these are
-# built into the standard C library, so this can be null. This is irrelevant
-# if OMIT_NETWORK is "y".
-
-NETWORKLD =
-# Solaris, SunOS:
-#NETWORKLD = -lsocket -lnsl
-# SCO:
-#NETWORKLD = -lsocket, -lresolv
-
-VMS =
-#VMS:
-#VMS = yes
-
-# DONT_HAVE_PROCESS_MGMT is Y if this system doesn't have the usual
-# Unix process management stuff - fork, wait, etc. N for a regular Unix
-# system.
-DONT_HAVE_PROCESS_MGMT = N
-
-# The following variables are used only by 'make install' (and the
-# variants of it). Paths here don't, for example, get built into any
-# programs.
-
-# This is where everything goes when you do 'make package', unless you
-# override it by setting 'pkgdir' on the Make command line.
-PKGDIR_DEFAULT = /tmp/netpbm
-
-# Subdirectory of the package directory ($(pkgdir)) in which man pages
-# go.
-PKGMANDIR = man
-
-# File permissions for installed files.
-# Note that on some systems (e.g. Solaris), 'install' can't use the
-# mnemonic permissions - you have to use octal.
-
-# binaries (pbmmake, etc)
-INSTALL_PERM_BIN = 755 # u=rwx,go=rx
-# shared libraries (libpbm.so, etc)
-INSTALL_PERM_LIBD = 755 # u=rwx,go=rx
-# static libraries (libpbm.a, etc)
-INSTALL_PERM_LIBS = 644 # u=rw,go=r
-# header files (pbm.h, etc)
-INSTALL_PERM_HDR = 644 # u=rw,go=r
-# man pages (pbmmake.1, etc)
-INSTALL_PERM_MAN = 644 # u=rw,go=r
-# data files (pnmtopalm color maps, etc)
-INSTALL_PERM_DATA = 644 # u=rw,go=r
-
-# Specify the suffix that want the man pages to have.
-
-SUFFIXMANUALS1 = 1
-SUFFIXMANUALS3 = 3
-SUFFIXMANUALS5 = 5
-
-#NETPBMLIBTYPE tells the kind of libraries that will get built to hold the
-#Netpbm library functions. The value is used only in make file tests.
-# "unixshared" means a unix-style shared library, typically named like
-# libxyz.so.2.3
-NETPBMLIBTYPE = unixshared
-# "unixstatic" means a unix-style static library, (like libxyz.a)
-#NETPBMLIBTYPE = unixstatic
-# "dll" means a Windows DLL shared library
-#NETPBMLIBTYPE = dll
-# "dylib" means a Darwin/Mac OS shared library
-#NETPBMLIBTYPE = dylib
-
-#NETPBMLIBSUFFIX is the suffix used on whatever kind of library is
-#selected above. All this is used for is to construct library names.
-#The make files never examine the actual value.
-NETPBMLIBSUFFIX = so
-
-# "a" is the suffix for unix-style static libraries. It is also
-# traditionally used for shared libraries on AIX. The Visual Age C
-# manual says sometimes .so works on AIX, and GNU software for AIX
-# 5.1.0 does indeed use it. In our experiments, it works fine if you
-# name the library file explicitly on the link, but isn't in the -l
-# search order. If you name the library explicitly on the link, the
-# library must live in exactly the same position at run time, so we
-# can't use that. Therefore, you cannot build both static and shared
-# libraries with AIX. You have to choose.
-#NETPBMLIBSUFFIX = a
-# For HP-UX shared libraries:
-#NETPBMLIBSUFFIX = sl
-# Darwin/Mac OS shared library:
-#NETPBMLIBSUFFIX = dylib
-# Windows shared library:
-#NETPBMLIBSUFFIX = dll
-
-#STATICLIB_TOO is "y" to signify that you want a static library built
-#and installed in addition to whatever library type you specified by
-#NETPBMLIBTYPE. If NETPBMLIBTYPE specified a static library,
-#STATICLIB_TOO simply has no effect.
-STATICLIB_TOO = y
-#STATICLIB_TOO = n
-
-#STATICLIBSUFFIX is the suffix that static libraries have. It's
-#meaningless if you aren't building static libraries.
-STATICLIBSUFFIX = a
-
-#SHLIBPREFIXLIST is a blank-delimited list of prefixes that a filename
-#of a shared library may have on this system. Traditionally, it's
-#just "lib", as in libc or libnetpbm. On Windows, though, varying
-#prefixes are used when multiple alternative forms of a library are
-#available. The first prefix in this list is what we use to name the
-#Netpbm shared libraries.
-#
-# This variable controls how 'libopt' gets built.
-#
-SHLIBPREFIXLIST = lib
-#Cygwin:
-#SHLIBPREFIXLIST = cyg lib
-
-NETPBMSHLIBPREFIX = $(firstword $(SHLIBPREFIXLIST))
-
-#DLLVER is used to version the DLLs built on cygwin or other
-#windowsish platforms. We can't add this to LIBROOT, or we'd
-#version the static libs (which is bad). We can't add this
-#at the end of the name (like unix does with so numbers) because
-#windows will only load dlls whose name ends in "dll". So,
-#we have this variable, which becomes the end of the library "root" name
-#for DLLs only.
-#
-# This variable controls how 'libopt' gets built.
-#
-DLLVER =
-#Cygwin
-#DLLVER = $(NETPBM_MAJOR_RELEASE)
-
-#NETPBM_DOCURL is the URL of the main documentation page for Netpbm.
-#This is a directory which contains a file for each Netpbm program,
-#library, and file type. E.g. The documentation for jpegtopnm might be in
-#http://netpbm.sourceforge.net/doc/jpegtopnm.html . This value gets
-#installed in the man pages (which say no more than to read the webpage)
-#and in the Webman netpbm.url file.
-NETPBM_DOCURL = http://netpbm.sourceforge.net/doc/
-#For a system with no web access, but a local copy of the doc:
-#NETPBM_DOCURL = file:/usr/doc/netpbm/
-
-
-
-
-
-####Lines above were copied from Makefile.config.in by 'configure'.
-####Lines below were added by 'configure' based on the GNU platform.
-DEFAULT_TARGET = nonmerge
-NETPBMLIBTYPE=unixshared
-NETPBMLIBSUFFIX=so
-STATICLIB_TOO=n
-CFLAGS = -O3 -ffast-math -pedantic -fno-common -Wall -Wno-uninitialized -Wmissing-declarations -Wimplicit -Wwrite-strings -Wmissing-prototypes -Wundef
-CFLAGS_MERGE = -Wno-missing-declarations -Wno-missing-prototypes
-LDRELOC = ld --reloc
-LINKER_CAN_DO_EXPLICIT_LIBRARY=Y
-LINKERISCOMPILER = Y
-TIFFLIB = libtiff.so
-JPEGLIB = libjpeg.so
-ZLIB = libz.so
-X11LIB = libX11.so
-LINUXSVGALIB = libvga.so
-NETPBM_DOCURL = http://netpbm.sourceforge.net/doc/