summaryrefslogtreecommitdiff
path: root/source/installer/sources/initrd/scripts/network.sh
diff options
context:
space:
mode:
Diffstat (limited to 'source/installer/sources/initrd/scripts/network.sh')
-rw-r--r--source/installer/sources/initrd/scripts/network.sh155
1 files changed, 155 insertions, 0 deletions
diff --git a/source/installer/sources/initrd/scripts/network.sh b/source/installer/sources/initrd/scripts/network.sh
new file mode 100644
index 00000000..499251c4
--- /dev/null
+++ b/source/installer/sources/initrd/scripts/network.sh
@@ -0,0 +1,155 @@
+#!/bin/sh
+
+# Remove extra whitespace
+crunch() {
+ while read line ; do
+ echo $line
+ done
+}
+
+echo
+echo "******* Welcome to the network supplemental disk! *******"
+echo
+
+# main loop:
+while [ 0 ]; do
+
+echo "-- Press [enter] to automatically probe for all network cards, or switch"
+echo " to a different console and use 'modprobe' to load the modules manually."
+echo "-- To skip probing some modules (in case of hangs), enter them after an S:"
+echo " S eepro100 ne2k-pci"
+echo "-- To probe only certain modules, enter them after a P like this:"
+echo " P 3c503 3c505 3c507"
+echo "-- To get a list of network modules, enter an L."
+echo "-- To skip the automatic probe entirely, enter a Q now."
+echo
+
+# Clear "card found" flag:
+rm -f /cardfound
+
+echo -n "network> "
+read INPUT;
+echo
+
+if [ "`echo $INPUT | crunch | cut -f 1 -d ' '`" = "L" \
+ -o "`echo $INPUT | crunch | cut -f 1 -d ' '`" = "l" ]; then
+ echo "Available network modules:"
+ for file in /lib/modules/`uname -r`/kernel/drivers/net/* /lib/modules/`uname -r`/kernel/arch/i386/kernel/* /lib/modules/`uname -r`/kernel/drivers/pnp/* ; do
+ if [ -r $file ]; then
+ OUTPUT=`basename $file .gz`
+ OUTPUT=`basename $OUTPUT .o`
+ echo -n "$OUTPUT "
+ fi
+ done
+ echo
+ echo
+ continue
+fi
+
+if [ ! "$INPUT" = "q" -a ! "$INPUT" = "Q" \
+ -a ! "`echo $INPUT | crunch | cut -f 1 -d ' '`" = "P" \
+ -a ! "`echo $INPUT | crunch | cut -f 1 -d ' '`" = "p" ]; then
+ echo "Probing for PCI/EISA network cards:"
+ for card in \
+ 3c59x acenic de4x5 dgrs eepro100 e1000 e1000e e100 epic100 hp100 ne2k-pci olympic pcnet32 rcpci 8139too 8139cp tulip via-rhine r8169 atl1e sktr yellowfin tg3 dl2k ns83820 \
+ ; do
+ SKIP=""
+ if [ "`echo $INPUT | crunch | cut -f 1 -d ' '`" = "S" \
+ -o "`echo $INPUT | crunch | cut -f 1 -d ' '`" = "s" ]; then
+ for nogood in `echo $INPUT | crunch | cut -f 2- -d ' '` ; do
+ if [ "$card" = "$nogood" ]; then
+ SKIP=$card
+ fi
+ done
+ fi
+ if [ "$SKIP" = "" ]; then
+ echo "Probing for card using the $card module..."
+ modprobe $card 2> /dev/null
+ grep -q eth0 /proc/net/dev
+ if [ $? = 0 ]; then
+ echo
+ echo "SUCCESS: found card using $card protocol -- modules loaded."
+ echo "$card" > /cardfound
+ echo
+ break
+ else
+ modprobe -r $card 2> /dev/null
+ fi
+ else
+ echo "Skipping module $card..."
+ fi
+ done
+ echo
+ if [ ! -r /cardfound ]; then
+ # Don't probe for com20020... it loads on any machine with or without the card.
+ echo "Probing for MCA, ISA, and other PCI network cards:"
+ # removed because it needs an irq parameter: arlan
+ # tainted, no autoprobe: (arcnet) com90io com90xx
+ for card in depca ibmtr 3c501 3c503 3c505 3c507 3c509 3c515 ac3200 \
+ acenic at1700 cosa cs89x0 de4x5 de600 \
+ de620 e2100 eepro eexpress es3210 eth16i ewrk3 fmv18x forcedeth hostess_sv11 \
+ hp-plus hp lne390 ne3210 ni5010 ni52 ni65 sb1000 sealevel smc-ultra \
+ sis900 smc-ultra32 smc9194 wd ; do
+ SKIP=""
+ if [ "`echo $INPUT | crunch | cut -f 1 -d ' '`" = "S" \
+ -o "`echo $INPUT | crunch | cut -f 1 -d ' '`" = "s" ]; then
+ for nogood in `echo $INPUT | crunch | cut -f 2- -d ' '` ; do
+ if [ "$card" = "$nogood" ]; then
+ SKIP=$card
+ fi
+ done
+ fi
+ if [ "$SKIP" = "" ]; then
+ echo "Probing for card using the $card module..."
+ modprobe $card 2> /dev/null
+ grep -q eth0 /proc/net/dev
+ if [ $? = 0 ]; then
+ echo
+ echo "SUCCESS: found card using $card protocol -- modules loaded."
+ echo "$card" > /cardfound
+ echo
+ break
+ else
+ modprobe -r $card 2> /dev/null
+ fi
+ else
+ echo "Skipping module $card..."
+ fi
+ done
+ echo
+ fi
+ if [ ! -r /cardfound ]; then
+ echo "Sorry, but no network card was detected. Some cards (like non-PCI"
+ echo "NE2000s) must be supplied with the I/O address to use. If you have"
+ echo "an NE2000, you can switch to another console (Alt-F2), log in, and"
+ echo "load it with a command like this:"
+ echo
+ echo " modprobe ne io=0x360"
+ echo
+ fi
+elif [ "`echo $INPUT | crunch | cut -f 1 -d ' '`" = "P" \
+ -o "`echo $INPUT | crunch | cut -f 1 -d ' '`" = "p" ]; then
+ echo "Probing for a custom list of modules:"
+ for card in `echo $INPUT | crunch | cut -f 2- -d ' '` ; do
+ echo "Probing for card using the $card module..."
+ modprobe $card 2> /dev/null
+ grep -q eth0 /proc/net/dev
+ if [ $? = 0 ]; then
+ echo
+ echo "SUCCESS: found card using $card protocol -- modules loaded."
+ echo "$card" > /cardfound
+ echo
+ break
+ else
+ modprobe -r $card 2> /dev/null
+ fi
+ done
+ echo
+else
+ echo "Skipping automatic module probe."
+ echo
+fi
+
+# end main loop
+break
+done