summaryrefslogtreecommitdiff
path: root/source/a/pcmciautils/config
diff options
context:
space:
mode:
Diffstat (limited to 'source/a/pcmciautils/config')
-rw-r--r--source/a/pcmciautils/config/60-pcmcia.rules22
-rw-r--r--source/a/pcmciautils/config/config.opts71
-rwxr-xr-xsource/a/pcmciautils/config/rc.pcmcia65
3 files changed, 158 insertions, 0 deletions
diff --git a/source/a/pcmciautils/config/60-pcmcia.rules b/source/a/pcmciautils/config/60-pcmcia.rules
new file mode 100644
index 00000000..677da01b
--- /dev/null
+++ b/source/a/pcmciautils/config/60-pcmcia.rules
@@ -0,0 +1,22 @@
+# PCMCIA devices:
+#
+# Very few CIS firmware entries (which we use for matching)
+# are so broken that we need to read out random bytes of it
+# instead of the manufactor, card or product ID. Then the
+# matching is done in userspace.
+ACTION=="add", SUBSYSTEM=="pcmcia", ENV{MODALIAS}=="?*", \
+ RUN+="/sbin/pcmcia-check-broken-cis"
+
+# However, the "weak" matching by func_id is only allowed _after_ modprobe
+# returns, so that "strong" matches have a higher priority.
+ACTION=="add", SUBSYSTEM=="pcmcia", ENV{MODALIAS}=="?*", \
+ RUN+="/bin/sh -c 'echo 1 > /sys/$DEVPATH/allow_func_id_match'"
+
+# PCMCIA sockets:
+#
+# modprobe the pcmcia bus module so that 16-bit PCMCIA devices work
+ACTION=="add", SUBSYSTEM=="pcmcia_socket", RUN+="/sbin/modprobe pcmcia"
+
+# if this is a PCMCIA socket which needs a resource database,
+# pcmcia-socket-startup sets it up
+ACTION=="add", SUBSYSTEM=="pcmcia_socket", RUN+="/sbin/pcmcia-socket-startup"
diff --git a/source/a/pcmciautils/config/config.opts b/source/a/pcmciautils/config/config.opts
new file mode 100644
index 00000000..5b8d5faf
--- /dev/null
+++ b/source/a/pcmciautils/config/config.opts
@@ -0,0 +1,71 @@
+#
+# Local PCMCIA Configuration File
+#
+#----------------------------------------------------------------------
+#
+# System resources available for PCMCIA cards
+#
+# NOTE: these settings have no effect on resources assigned to a
+# CardBus bridge device itself; this file only affects resources
+# assigned to cards. Also, interrupt settings here will only affect
+# ISA bus interrupts assigned to 16-bit cards. PCI interrupts
+# generally can't be reconfigured.
+#
+# With the kernel PCMCIA subsystem, these settings also have no effect
+# at all on resources used for 32-bit CardBus cards. Those are set by
+# the PCI hotplug subsystem.
+#
+
+# These are the official ports to use from pcmcia-cs:
+#include port 0x100-0x4ff, port 0x800-0x8ff, port 0xc00-0xcff
+# However, ports 0x810-0x81f hurt on some DELL machines and
+# ports 0x3b0-0x3df hurt on some FSC machines, so we use this port
+# list instead:
+include port 0x100-0x3af, port 0x3e0-0x4ff, port 0xc00-0xcff
+
+include memory 0xc0000-0xfffff
+include memory 0xa0000000-0xa0ffffff, memory 0x60000000-0x60ffffff
+
+# High port numbers do not always work...
+# include port 0x1000-0x17ff
+
+# Extra port range for IBM Token Ring
+include port 0xa00-0xaff
+
+# Resources we should not use, even if they appear to be available
+
+# First built-in serial port
+exclude irq 4
+# Second built-in serial port
+#exclude irq 3
+# First built-in parallel port
+exclude irq 7
+
+#----------------------------------------------------------------------
+
+# Examples of options for loadable modules
+
+# To fix sluggish network with IBM ethernet adapter...
+#module "pcnet_cs" opts "mem_speed=600"
+
+# Options for IBM Token Ring adapters
+#module "ibmtr_cs" opts "mmiobase=0xd0000 srambase=0xd4000"
+
+# Options for Raylink/WebGear driver: uncomment only one line...
+# These are the default settings for use with the WebGear Windows driver:
+#module "ray_cs" opts "essid=NETWORK_NAME hop_dwell=128 beacon_period=256 translate=0"
+# Generic ad-hoc network
+#module "ray_cs" opts "essid=ADHOC_ESSID hop_dwell=128 beacon_period=256 translate=1"
+# Infrastructure network for older cards
+#module "ray_cs" opts "net_type=1 essid=ESSID1"
+# Infrastructure network for WebGear
+#module "ray_cs" opts "net_type=1 essid=ESSID1 translate=1 hop_dwell=128 beacon_period=256"
+
+# Options for WaveLAN/IEEE driver (AccessPoint mode)...
+#module "wvlan_cs" opts "station_name=MY_PC"
+# Options for WaveLAN/IEEE driver (ad-hoc mode)...
+#module "wvlan_cs" opts "port_type=3 channel=1 station_name=MY_PC"
+
+# Options for Xircom Netwave driver...
+#module "netwave_cs" opts "domain=0x100 scramble_key=0x0"
+
diff --git a/source/a/pcmciautils/config/rc.pcmcia b/source/a/pcmciautils/config/rc.pcmcia
new file mode 100755
index 00000000..1f21be84
--- /dev/null
+++ b/source/a/pcmciautils/config/rc.pcmcia
@@ -0,0 +1,65 @@
+#!/bin/sh
+#
+# rc.pcmcia: Script to initialize PCMCIA subsystem.
+# Based in an example found in cardmgr-to-pcmciautils.txt
+# and in Slackware rc.pcmcia found in pcmcia-cs package.
+#
+
+# Set this to the driver to use, one of:
+# probe, yenta_socket, i82365, i82092, pd6729, tcic, etc.
+#
+DRIVER=probe
+DRIVER_OPTS=
+
+case "$1" in
+ start)
+ echo "Starting PCMCIA services:"
+ fgrep -q pcmcia /proc/devices
+ if [ $? -ne 0 ] ; then
+ if [ "$DRIVER" = "probe" ]; then
+ echo " <Probing for PCIC: edit /etc/rc.d/rc.pcmcia>"
+ for DRV in yenta_socket i82365 tcic ; do
+ /sbin/modprobe $DRV > /dev/null 2>&1
+ /sbin/pccardctl status | grep -q Socket && break
+ /sbin/modprobe -r $DRV > /dev/null 2>&1
+ done
+ else
+ echo " <Loading PCIC: $DRIVER>"
+ /sbin/modprobe $DRIVER $DRIVER_OPTS > /dev/null 2>&1
+ fi
+ /sbin/modprobe pcmcia > /dev/null 2>&1 # just in case it's not auto-loaded
+ else
+ echo " <PCIC already loaded>"
+ fi
+ ;;
+
+ stop)
+ echo -n "Shutting down PCMCIA services: "
+ echo -n "cards "
+ /sbin/pccardctl eject
+ MODULES=`/sbin/lsmod | grep "pcmcia " | awk '{print $4}' | tr , ' '`
+ for i in $MODULES ; do
+ echo -n "$i "
+ /sbin/modprobe -r $i > /dev/null 2>&1
+ done
+ echo -n "pcmcia "
+ /sbin/modprobe -r pcmcia > /dev/null 2>&1
+ if [ "$DRIVER" = "probe" ]; then
+ for DRV in yenta_socket i82365 tcic ; do
+ grep -qw $DRV /proc/modules && modprobe -r $DRV && \
+ echo -n "$DRV " && break
+ done
+ else
+ /sbin/modprobe -r $DRIVER > /dev/null 2>&1
+ fi
+ echo -n "rsrc_nonstatic "
+ /sbin/modprobe -r rsrc_nonstatic > /dev/null 2>&1
+ echo "pcmcia_core"
+ /sbin/modprobe -r pcmcia_core > /dev/null 2>&1
+ ;;
+
+ restart)
+ $0 stop
+ $0 start
+ ;;
+esac