summaryrefslogtreecommitdiff
path: root/source/a/mt-st
diff options
context:
space:
mode:
Diffstat (limited to 'source/a/mt-st')
-rwxr-xr-xsource/a/mt-st/mt-st.SlackBuild82
-rw-r--r--source/a/mt-st/mt-st.config.diff172
-rw-r--r--source/a/mt-st/mt-st.man.diff31
-rw-r--r--source/a/mt-st/mt-st.sdlt.diff11
-rw-r--r--source/a/mt-st/slack-desc19
5 files changed, 315 insertions, 0 deletions
diff --git a/source/a/mt-st/mt-st.SlackBuild b/source/a/mt-st/mt-st.SlackBuild
new file mode 100755
index 00000000..cbf44ec2
--- /dev/null
+++ b/source/a/mt-st/mt-st.SlackBuild
@@ -0,0 +1,82 @@
+#!/bin/sh
+
+# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, Minnesota, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
+# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+VERSION=${VERSION:-0.9b}
+ARCH=${ARCH:-x86_64}
+BUILD=${BUILD:-2}
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-mt-st
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+cd $TMP
+rm -rf mt-st-$VERSION
+tar xzvf $CWD/mt-st-$VERSION.tar.gz
+cd mt-st-$VERSION
+
+zcat $CWD/mt-st.config.diff.gz | patch -p1 --verbose || exit 1
+zcat $CWD/mt-st.man.diff.gz | patch -p1 --verbose || exit 1
+zcat $CWD/mt-st.sdlt.diff.gz | patch -p1 --verbose || exit 1
+
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \;
+
+sed -i -e 's#<linux/qic117.h>#"qic117.h"#' mtio.h || exit 1
+make || exit 1
+
+strip mt stinit
+mkdir -p $PKG/bin
+cat mt > $PKG/bin/mt-st
+chmod 755 $PKG/bin/mt-st
+( cd $PKG/bin ; ln -sf mt-st mt )
+mkdir -p $PKG/sbin
+cat stinit > $PKG/sbin/stinit
+chmod 755 $PKG/sbin/stinit
+mkdir -p $PKG/usr/man/man{1,8}
+cat mt.1 | gzip -9c > $PKG/usr/man/man1/mt-st.1.gz
+cat stinit.8 | gzip -9c > $PKG/usr/man/man8/stinit.8.gz
+
+( cd $PKG
+ find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+ find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+)
+
+mkdir -p $PKG/usr/doc/mt-st-$VERSION
+cp -a \
+ COPYING README* *.lsm stinit.def.examples \
+ $PKG/usr/doc/mt-st-$VERSION
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+# Build the package:
+cd $PKG
+makepkg -l y -c n $TMP/mt-st-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/source/a/mt-st/mt-st.config.diff b/source/a/mt-st/mt-st.config.diff
new file mode 100644
index 00000000..756261b1
--- /dev/null
+++ b/source/a/mt-st/mt-st.config.diff
@@ -0,0 +1,172 @@
+--- mt-st-0.8/stinit.def.examples.configfiles 2002-09-23 19:02:21.000000000 +0200
++++ mt-st-0.8/stinit.def.examples 2005-04-07 08:21:01.732633520 +0200
+@@ -56,3 +56,169 @@
+ mode3 blocksize=0 density=1 # 800 bpi
+ }
+
++# DLT2000 / 2000XT
++manufacturer="QUANTUM" model = "DLT2000" {
++scsi2logical=1
++can-bsr
++auto-lock=0
++two-fms=0
++drive-buffering=1
++buffer-writes
++read-ahead=1
++async-writes=1
++can-partitions=0
++fast-mteom=1
++#
++# If your stinit supports the timeouts:
++timeout=3600 # 1 hour
++long-timeout=14400 # 4 hours
++#
++mode1 blocksize=0 density=0x81 # 10GB + compression on DLTtape III, 15+ with DLTtape IIIXT in 2000XT
++mode2 blocksize=0 density=0x80 # 10GB, no compression on DLTtape III, 15 with DLTtape IIIXT in 2000XT
++mode3 blocksize=0 density=0x18 # 6GB, compression not available, on DLTtape III
++mode4 blocksize=0 density=0x17 #2.6GB, compression not available, on DLTtape III
++}
++
++# DLT4000
++manufacturer="QUANTUM" model = "DLT4000" {
++scsi2logical=1
++can-bsr
++auto-lock=0
++two-fms=0
++drive-buffering=1
++buffer-writes
++read-ahead=1
++async-writes=1
++can-partitions=0
++fast-mteom=1
++#
++# If your stinit supports the timeouts:
++timeout=3600 # 1 hour
++long-timeout=14400 # 4 hours
++#
++# Drive is backwards compatible, use older modes (e.g. from above) as required
++mode1 blocksize=0 density=0x83 # 20GB + compression
++mode2 blocksize=0 density=0x82 # 20GB, no compression
++mode3 blocksize=0 density=0x81 # 10GB + compression (DLT2000 mode) with DLTtape III, 15+ with DLTtape IIIXT in 2000XT
++mode4 blocksize=0 density=0x80 # 10GB, no compression (DLT2000 mode) with DLTtape III, 15 with DLTtape IIIXT in 2000XT
++}
++
++# DLT7000
++manufacturer="QUANTUM" model = "DLT7000" {
++scsi2logical=1
++can-bsr
++auto-lock=0
++two-fms=0
++drive-buffering=1
++buffer-writes
++read-ahead=1
++async-writes=1
++can-partitions=0
++fast-mteom=1
++#
++# If your stinit supports the timeouts:
++timeout=3600 # 1 hour
++long-timeout=14400 # 4 hours
++#
++# Drive is backwards compatible, use older modes (e.g. from above) as required.
++mode1 blocksize=0 density=0x85 # 35GB + compression
++mode2 blocksize=0 density=0x84 # 35GB, no compression
++mode3 blocksize=0 density=0x83 # 20GB + compression (DLT4000 mode)
++mode4 blocksize=0 density=0x82 # 20GB, no compression (DLT4000 mode)
++}
++
++# DLT8000
++manufacturer="QUANTUM" model = "DLT8000" {
++scsi2logical=1
++can-bsr=1
++auto-lock=0
++two-fms=0
++drive-buffering=1
++buffer-writes
++read-ahead=1
++async-writes=1
++can-partitions=0
++fast-mteom=1
++#
++# If your stinit supports the timeouts:
++timeout=3600 # 1 hour
++long-timeout=14400 # 4 hours
++#
++# Drive is backwards compatible to DLT7000, use older modes (e.g. from above) as required. Modes <10GB (<0x19) not supported!
++mode1 blocksize=0 density=0x89 # 40GB + compression
++mode2 blocksize=0 density=0x88 # 40GB, no compression
++mode3 blocksize=0 density=0x85 # 35GB + compression (DLT7000 mode)
++mode4 blocksize=0 density=0x84 # 35GB, no compression (DLT7000 mode)
++}
++
++
++# SDLT220
++manufacturer="QUANTUM" model = "SuperDLT1" {
++scsi2logical=1
++can-bsr=1
++auto-lock=0
++two-fms=0
++drive-buffering=1
++buffer-writes
++read-ahead=1
++async-writes=1
++can-partitions=0
++fast-mteom=1
++#
++# If your stinit supports the timeouts:
++timeout=3600 # 1 hour
++long-timeout=14400 # 4 hours
++#
++# Drive is backwards read compatible to DLT4000/7000/8000. Mode settings are only required for writing, so no need to define any other modes here.
++mode1 blocksize=0 density=0x48 compression=1 # 110 GB + compression
++mode2 blocksize=0 density=0x48 compression=0 # 110 GB, no ompression
++}
++
++# SDLT320
++manufacturer="QUANTUM" model = "SDLT320" {
++scsi2logical=1
++can-bsr=1
++auto-lock=0
++two-fms=0
++drive-buffering=1
++buffer-writes
++read-ahead=1
++async-writes=1
++can-partitions=0
++fast-mteom=1
++#
++# If your stinit supports the timeouts:
++timeout=3600 # 1 hour
++long-timeout=14400 # 4 hours
++#
++# Drive is backwards write compatible to SDLT220 and read compatible to DLT4000/7000/8000. Mode settings are only required for writing, so we need only the SDL220/320 modes here
++mode1 blocksize=0 density=0x49 compression=1 # 160 GB + compression
++mode2 blocksize=0 density=0x49 compression=0 # 160 GB, no ompression
++mode3 blocksize=0 density=0x48 compression=1 # 110 GB + compression
++mode4 blocksize=0 density=0x48 compression=0 # 110 GB, no ompression
++}
++
++# SDLT600
++manufacturer="QUANTUM" model = "SDLT600" {
++scsi2logical=1
++can-bsr=1
++auto-lock=0
++two-fms=0
++drive-buffering=1
++buffer-writes
++read-ahead=1
++async-writes=1
++can-partitions=0
++fast-mteom=1
++#
++# If your stinit supports the timeouts:
++timeout=3600 # 1 hour
++long-timeout=14400 # 4 hours
++#
++# Drive is backwards read compatible to SDLT220/320 and VS160. Mode settings are only required for writing, so we need only the native SDLT600 mode here.
++mode1 blocksize=0 density=0x4a compression=1 # 300 GB + compression
++mode2 blocksize=0 density=0x4a compression=0 # 300 GB, no ompression
++mode3 blocksize=0 density=0x4a compression=1 # 300 GB + compression
++mode4 blocksize=0 density=0x4a compression=0 # 300 GB, no ompression
++}
++
diff --git a/source/a/mt-st/mt-st.man.diff b/source/a/mt-st/mt-st.man.diff
new file mode 100644
index 00000000..d22acefc
--- /dev/null
+++ b/source/a/mt-st/mt-st.man.diff
@@ -0,0 +1,31 @@
+--- mt-st-0.9b/mt.1.manfix 2005-08-21 20:53:50.000000000 +0200
++++ mt-st-0.9b/mt.1 2005-10-25 12:13:43.000000000 +0200
+@@ -48,20 +48,22 @@
+ files.
+ The tape is positioned on the first block of the next file.
+ .IP fsfm
+-Forward space
++Forward space past
+ .I count
+-files.
+-The tape is positioned on the last block of the previous file.
++file marks, then backward space one file record.
++This leaves the tape positioned on the last block of the file that is count-1
++files past the current file.
+ .IP bsf
+ Backward space
+ .I count
+ files.
+ The tape is positioned on the last block of the previous file.
+ .IP bsfm
+-Backward space
++Backward space past
+ .I count
+-files.
+-The tape is positioned on the first block of the next file.
++file marks, then forward space one file record.
++This leaves the tape positioned on the first block of the file that is count-1
++files before the current file.
+ .IP asf
+ The tape is positioned at the beginning of the
+ .I count
diff --git a/source/a/mt-st/mt-st.sdlt.diff b/source/a/mt-st/mt-st.sdlt.diff
new file mode 100644
index 00000000..8dd9fa9f
--- /dev/null
+++ b/source/a/mt-st/mt-st.sdlt.diff
@@ -0,0 +1,11 @@
+--- mt-st-0.7/mt.c.orig Sat Feb 22 14:48:09 2003
++++ mt-st-0.7/mt.c Sat Feb 22 14:50:21 2003
+@@ -220,6 +220,8 @@
+ {0x41, "DLT 40GB"},
+ {0x45, "QIC-3095-MC (TR-4)"},
+ {0x47, "TR-5"},
++ {0x48, "Quantum SDLT220"},
++ {0x49, "Quantum SDLT320"},
+ {0x80, "DLT 15GB uncomp. or Ecrix"},
+ {0x81, "DLT 15GB compressed"},
+ {0x82, "DLT 20GB uncompressed"},
diff --git a/source/a/mt-st/slack-desc b/source/a/mt-st/slack-desc
new file mode 100644
index 00000000..dda83093
--- /dev/null
+++ b/source/a/mt-st/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':'.
+
+ |-----handy-ruler------------------------------------------------------|
+mt-st: mt-st (controls magnetic tape drive operation)
+mt-st:
+mt-st: This mt originates from BSD NET-2. Some Linux SCSI tape-specific
+mt-st: ioctls have been added to the original source and the man page has
+mt-st: been updated. Although this mt program is tailored for SCSI tape, it
+mt-st: can also be used with the QIC-02 driver and hopefully with other Linux
+mt-st: tape drivers using the same ioctls (some of the commands may not work
+mt-st: with all drivers).
+mt-st:
+mt-st:
+mt-st: