summaryrefslogtreecommitdiff
path: root/source/a/mkinitrd
diff options
context:
space:
mode:
Diffstat (limited to 'source/a/mkinitrd')
-rw-r--r--source/a/mkinitrd/README.initrd100
-rw-r--r--source/a/mkinitrd/archive/busybox-1.7.2.no-gc-sections.diff11
-rw-r--r--source/a/mkinitrd/archive/busybox-1.7.2.remove_warning.diff20
-rw-r--r--source/a/mkinitrd/archive/busybox-1.7.2.tar.bz2.sign18
-rw-r--r--source/a/mkinitrd/archive/busybox-dot-config.1.11.2855
-rw-r--r--source/a/mkinitrd/archive/busybox-dot-config.1.12.0857
-rw-r--r--source/a/mkinitrd/archive/busybox-dot-config.1.12.1857
-rw-r--r--source/a/mkinitrd/archive/busybox-dot-config.1.7.2753
-rw-r--r--source/a/mkinitrd/busybox-1.12.1_inotify.diff11
-rw-r--r--source/a/mkinitrd/busybox-dot-config857
-rwxr-xr-xsource/a/mkinitrd/init230
-rw-r--r--source/a/mkinitrd/mkinitrd494
-rw-r--r--source/a/mkinitrd/mkinitrd.8194
-rwxr-xr-xsource/a/mkinitrd/mkinitrd.SlackBuild119
-rw-r--r--source/a/mkinitrd/mkinitrd.conf.5174
-rw-r--r--source/a/mkinitrd/mkinitrd.conf.sample16
-rw-r--r--source/a/mkinitrd/mkinitrd_command_generator.sh842
-rw-r--r--source/a/mkinitrd/mkinitrd_kernelcheck.diff15
-rw-r--r--source/a/mkinitrd/slack-desc19
19 files changed, 6442 insertions, 0 deletions
diff --git a/source/a/mkinitrd/README.initrd b/source/a/mkinitrd/README.initrd
new file mode 100644
index 00000000..f027fa27
--- /dev/null
+++ b/source/a/mkinitrd/README.initrd
@@ -0,0 +1,100 @@
+
+Slackware initrd mini HOWTO
+by Patrick Volkerding, volkerdi@slackware.com
+Wed Jun 17 01:49:18 CDT 2009
+
+This document describes how to create and install an initrd, which may be
+required to use the 2.6 kernel. Also see "man mkinitrd".
+
+1. What is an initrd?
+2. Why to I need an initrd?
+3. How do I build the initrd?
+4. Now that I've built an initrd, how do I use it?
+
+
+1. What is an initrd?
+
+Initrd stands for "initial ramdisk". An initial ramdisk is a very small
+Linux filesystem that is loaded into RAM and mounted as the kernel boots,
+and before the main root filesystem is mounted.
+
+2. Why do I need an initrd?
+
+The usual reason to use an initrd is because you need to load kernel
+modules before mounting the root partition. Usually these modules are
+required to support the filesystem used by the root partition (ext3,
+reiserfs, xfs), or perhaps the controller that the hard drive is attached
+to (SCSI, RAID, etc). Essentially, there are so many different options
+available in modern Linux kernels that it isn't practical to try to ship
+many different kernels to try to cover everyone's needs. It's a lot more
+flexible to ship a generic kernel and a set of kernel modules for it.
+
+3. How do I build the initrd?
+
+The easiest way to make the initrd is to use the mkinitrd script included
+in Slackware's mkinitrd package. We'll walk through the process of
+upgrading to the generic 2.6.29.5 Linux kernel using the packages
+found in Slackware's slackware/a/ directory.
+
+First, make sure the kernel, kernel modules, and mkinitrd package are
+installed (the current version numbers might be a little different, so
+this is just an example):
+
+ installpkg kernel-generic-2.6.29.5-i686-1.tgz
+ installpkg kernel-modules-2.6.29.5-i686-1.tgz
+ installpkg mkinitrd-1.1.0-i486-1.tgz
+
+Change into the /boot directory:
+
+ cd /boot
+
+Now you'll want to run "mkinitrd". I'm using reiserfs for my root
+filesystem, and since it's an IDE system the reiserfs module will be
+the only one I need to load:
+
+ mkinitrd -c -k 2.6.29.5 -m reiserfs
+
+This should do two things. First, it will create a directory
+/boot/initrd-tree containing the initrd's filesystem. Then it will
+create an initrd (/boot/initrd.gz) from this tree. If you wanted to,
+you could make some additional changes in /boot/initrd-tree/ and
+then run mkinitrd again without options to rebuild the image. That's
+optional, though, and only advanced users will need to think about that.
+
+Here's another example: Build an initrd image using Linux 2.6.29.5
+kernel modules for a system with an ext3 root partition on /dev/hdb3.
+Note that you need the mbcache, jbd, and ext3 modules to use ext3:
+
+ mkinitrd -c -k 2.6.29.5 -m mbcache:jbd:ext3 -f ext3 -r /dev/hdb3
+
+
+4. Now that I've built an initrd, how do I use it?
+
+Now that you've got an initrd (/boot/initrd.gz), you'll want to load
+it along with the kernel at boot time. If you use LILO for your boot
+loader you'll need to edit /etc/lilo.conf and add a line to load the
+initrd. Here's an example section of lilo.conf showing how this is
+done:
+
+# Linux bootable partition config begins
+image = /boot/vmlinuz-generic-2.6.29.5
+ initrd = /boot/initrd.gz
+ root = /dev/hda6
+ label = Lnx26295
+ read-only
+# Linux bootable partition config ends
+
+The initrd is loaded by the "initrd = /boot/initrd.gz" line.
+Just add the line right below the line for the kernel image you use.
+Save the file, and then run LILO again ('lilo' at the command line).
+You'll need to run lilo every time you edit lilo.conf or rebuild the
+initrd.
+
+Other bootloaders such as syslinux also support the use of an initrd.
+See the documentation for those programs for details on using an
+initrd with them.
+
+
+---------
+
+Have fun!
diff --git a/source/a/mkinitrd/archive/busybox-1.7.2.no-gc-sections.diff b/source/a/mkinitrd/archive/busybox-1.7.2.no-gc-sections.diff
new file mode 100644
index 00000000..e4f64367
--- /dev/null
+++ b/source/a/mkinitrd/archive/busybox-1.7.2.no-gc-sections.diff
@@ -0,0 +1,11 @@
+--- ./Makefile.orig 2007-09-29 18:54:25.000000000 -0500
++++ ./Makefile 2007-11-27 15:35:42.000000000 -0600
+@@ -570,7 +570,7 @@
+ quiet_cmd_busybox__ ?= LINK $@
+ cmd_busybox__ ?= $(srctree)/scripts/trylink $(CC) $(LDFLAGS) \
+ -o $@ -Wl,-Map -Wl,$@.map \
+- -Wl,--warn-common -Wl,--sort-common -Wl,--gc-sections \
++ -Wl,--warn-common -Wl,--sort-common \
+ -Wl,--start-group $(busybox-all) -Wl,--end-group \
+ $(LDLIBS)
+
diff --git a/source/a/mkinitrd/archive/busybox-1.7.2.remove_warning.diff b/source/a/mkinitrd/archive/busybox-1.7.2.remove_warning.diff
new file mode 100644
index 00000000..99257fc7
--- /dev/null
+++ b/source/a/mkinitrd/archive/busybox-1.7.2.remove_warning.diff
@@ -0,0 +1,20 @@
+--- ./applets/applets.c.orig 2007-09-16 13:48:10.000000000 -0500
++++ ./applets/applets.c 2007-10-04 22:07:47.000000000 -0500
+@@ -16,7 +16,7 @@
+ #include "busybox.h"
+
+ /* Apparently uclibc defines __GLIBC__ (compat trick?). Oh well. */
+-#if ENABLE_STATIC && defined(__GLIBC__) && !defined(__UCLIBC__)
++/* #if ENABLE_STATIC && defined(__GLIBC__) && !defined(__UCLIBC__)
+ #warning Static linking against glibc produces buggy executables
+ #warning (glibc does not cope well with ld --gc-sections).
+ #warning See sources.redhat.com/bugzilla/show_bug.cgi?id=3400
+@@ -24,7 +24,7 @@
+ #warning If you still want to do it, remove -Wl,--gc-sections
+ #warning from top-level Makefile and remove this warning.
+ #error Aborting compilation.
+-#endif
++#endif */
+
+
+ /* Declare <applet>_main() */
diff --git a/source/a/mkinitrd/archive/busybox-1.7.2.tar.bz2.sign b/source/a/mkinitrd/archive/busybox-1.7.2.tar.bz2.sign
new file mode 100644
index 00000000..19ac2fab
--- /dev/null
+++ b/source/a/mkinitrd/archive/busybox-1.7.2.tar.bz2.sign
@@ -0,0 +1,18 @@
+-----BEGIN PGP SIGNED MESSAGE-----
+Hash: SHA1
+
+busybox-1.7.2.tar.bz2 released Sun, 30 Sep 2007 01:02:10 +0100
+
+MD5: c91ec9756e2000073a9dd8fa9fc3f89e busybox-1.7.2.tar.bz2
+SHA1: d9c618a7b104af4e70d623b1b6f3bc454405e12b busybox-1.7.2.tar.bz2
+
+To verify this signature, you can obtain my public key
+from http://busybox.net/~vda/vda_pubkey.gpg
+
+-----BEGIN PGP SIGNATURE-----
+Version: GnuPG v1.4.2.2 (GNU/Linux)
+
+iD8DBQFG/ueHR7cMVazJllsRAuBAAJ9r7SuXFQJCm/k0KZp39oDMsqBy7ACffZ9t
+r/kwDWTYEr7doIKcNINt+p0=
+=GHTs
+-----END PGP SIGNATURE-----
diff --git a/source/a/mkinitrd/archive/busybox-dot-config.1.11.2 b/source/a/mkinitrd/archive/busybox-dot-config.1.11.2
new file mode 100644
index 00000000..012350ef
--- /dev/null
+++ b/source/a/mkinitrd/archive/busybox-dot-config.1.11.2
@@ -0,0 +1,855 @@
+#
+# Automatically generated make config: don't edit
+# Busybox version: 1.11.2
+# Tue Sep 23 23:25:46 2008
+#
+CONFIG_HAVE_DOT_CONFIG=y
+
+#
+# Busybox Settings
+#
+
+#
+# General Configuration
+#
+CONFIG_DESKTOP=y
+# CONFIG_FEATURE_ASSUME_UNICODE is not set
+CONFIG_FEATURE_BUFFERS_USE_MALLOC=y
+# CONFIG_FEATURE_BUFFERS_GO_ON_STACK is not set
+# CONFIG_FEATURE_BUFFERS_GO_IN_BSS is not set
+CONFIG_SHOW_USAGE=y
+CONFIG_FEATURE_VERBOSE_USAGE=y
+CONFIG_FEATURE_COMPRESS_USAGE=y
+CONFIG_FEATURE_INSTALLER=y
+CONFIG_LOCALE_SUPPORT=y
+CONFIG_GETOPT_LONG=y
+CONFIG_FEATURE_DEVPTS=y
+# CONFIG_FEATURE_CLEAN_UP is not set
+CONFIG_FEATURE_PIDFILE=y
+CONFIG_FEATURE_SUID=y
+CONFIG_FEATURE_SUID_CONFIG=y
+CONFIG_FEATURE_SUID_CONFIG_QUIET=y
+# CONFIG_SELINUX is not set
+# CONFIG_FEATURE_PREFER_APPLETS is not set
+CONFIG_BUSYBOX_EXEC_PATH="/proc/self/exe"
+CONFIG_FEATURE_SYSLOG=y
+CONFIG_FEATURE_HAVE_RPC=y
+
+#
+# Build Options
+#
+CONFIG_STATIC=y
+# CONFIG_PIE is not set
+# CONFIG_NOMMU is not set
+# CONFIG_BUILD_LIBBUSYBOX is not set
+# CONFIG_FEATURE_INDIVIDUAL is not set
+# CONFIG_FEATURE_SHARED_BUSYBOX is not set
+CONFIG_LFS=y
+CONFIG_CROSS_COMPILER_PREFIX=""
+
+#
+# Debugging Options
+#
+# CONFIG_DEBUG is not set
+# CONFIG_DEBUG_PESSIMIZE is not set
+# CONFIG_WERROR is not set
+CONFIG_NO_DEBUG_LIB=y
+# CONFIG_DMALLOC is not set
+# CONFIG_EFENCE is not set
+CONFIG_INCLUDE_SUSv2=y
+
+#
+# Installation Options
+#
+CONFIG_INSTALL_NO_USR=y
+CONFIG_INSTALL_APPLET_SYMLINKS=y
+# CONFIG_INSTALL_APPLET_HARDLINKS is not set
+# CONFIG_INSTALL_APPLET_SCRIPT_WRAPPERS is not set
+# CONFIG_INSTALL_APPLET_DONT is not set
+# CONFIG_INSTALL_SH_APPLET_SYMLINK is not set
+# CONFIG_INSTALL_SH_APPLET_HARDLINK is not set
+# CONFIG_INSTALL_SH_APPLET_SCRIPT_WRAPPER is not set
+CONFIG_PREFIX="./_install"
+
+#
+# Busybox Library Tuning
+#
+CONFIG_PASSWORD_MINLEN=6
+CONFIG_MD5_SIZE_VS_SPEED=2
+# CONFIG_FEATURE_FAST_TOP is not set
+# CONFIG_FEATURE_ETC_NETWORKS is not set
+CONFIG_FEATURE_EDITING=y
+CONFIG_FEATURE_EDITING_MAX_LEN=1024
+CONFIG_FEATURE_EDITING_VI=y
+CONFIG_FEATURE_EDITING_HISTORY=64
+# CONFIG_FEATURE_EDITING_SAVEHISTORY is not set
+CONFIG_FEATURE_TAB_COMPLETION=y
+# CONFIG_FEATURE_USERNAME_COMPLETION is not set
+CONFIG_FEATURE_EDITING_FANCY_PROMPT=y
+CONFIG_FEATURE_VERBOSE_CP_MESSAGE=y
+CONFIG_FEATURE_COPYBUF_KB=4
+CONFIG_MONOTONIC_SYSCALL=y
+CONFIG_IOCTL_HEX2STR_ERROR=y
+# CONFIG_FEATURE_HWIB is not set
+
+#
+# Applets
+#
+
+#
+# Archival Utilities
+#
+CONFIG_AR=y
+CONFIG_FEATURE_AR_LONG_FILENAMES=y
+CONFIG_BUNZIP2=y
+CONFIG_BZIP2=y
+CONFIG_CPIO=y
+CONFIG_FEATURE_CPIO_O=y
+# CONFIG_DPKG is not set
+# CONFIG_DPKG_DEB is not set
+# CONFIG_FEATURE_DPKG_DEB_EXTRACT_ONLY is not set
+CONFIG_GUNZIP=y
+CONFIG_FEATURE_GUNZIP_UNCOMPRESS=y
+CONFIG_GZIP=y
+CONFIG_RPM2CPIO=y
+# CONFIG_RPM is not set
+# CONFIG_FEATURE_RPM_BZ2 is not set
+CONFIG_TAR=y
+CONFIG_FEATURE_TAR_CREATE=y
+CONFIG_FEATURE_TAR_GZIP=y
+CONFIG_FEATURE_TAR_BZIP2=y
+CONFIG_FEATURE_TAR_LZMA=y
+CONFIG_FEATURE_TAR_COMPRESS=y
+CONFIG_FEATURE_TAR_AUTODETECT=y
+CONFIG_FEATURE_TAR_FROM=y
+CONFIG_FEATURE_TAR_OLDGNU_COMPATIBILITY=y
+# CONFIG_FEATURE_TAR_OLDSUN_COMPATIBILITY is not set
+CONFIG_FEATURE_TAR_GNU_EXTENSIONS=y
+CONFIG_FEATURE_TAR_LONG_OPTIONS=y
+CONFIG_FEATURE_TAR_UNAME_GNAME=y
+CONFIG_UNCOMPRESS=y
+CONFIG_UNLZMA=y
+CONFIG_FEATURE_LZMA_FAST=y
+CONFIG_UNZIP=y
+
+#
+# Common options for cpio and tar
+#
+# CONFIG_FEATURE_DEB_TAR_GZ is not set
+# CONFIG_FEATURE_DEB_TAR_BZ2 is not set
+# CONFIG_FEATURE_DEB_TAR_LZMA is not set
+
+#
+# Coreutils
+#
+CONFIG_BASENAME=y
+CONFIG_CAL=y
+CONFIG_CAT=y
+CONFIG_CATV=y
+CONFIG_CHGRP=y
+CONFIG_CHMOD=y
+CONFIG_CHOWN=y
+CONFIG_CHROOT=y
+CONFIG_CKSUM=y
+CONFIG_COMM=y
+CONFIG_CP=y
+CONFIG_CUT=y
+CONFIG_DATE=y
+CONFIG_FEATURE_DATE_ISOFMT=y
+CONFIG_DD=y
+CONFIG_FEATURE_DD_SIGNAL_HANDLING=y
+CONFIG_FEATURE_DD_IBS_OBS=y
+CONFIG_DF=y
+CONFIG_FEATURE_DF_INODE=y
+CONFIG_DIRNAME=y
+CONFIG_DOS2UNIX=y
+CONFIG_UNIX2DOS=y
+CONFIG_DU=y
+CONFIG_FEATURE_DU_DEFAULT_BLOCKSIZE_1K=y
+CONFIG_ECHO=y
+CONFIG_FEATURE_FANCY_ECHO=y
+CONFIG_ENV=y
+CONFIG_FEATURE_ENV_LONG_OPTIONS=y
+CONFIG_EXPAND=y
+CONFIG_FEATURE_EXPAND_LONG_OPTIONS=y
+CONFIG_EXPR=y
+CONFIG_EXPR_MATH_SUPPORT_64=y
+CONFIG_FALSE=y
+CONFIG_FOLD=y
+CONFIG_HEAD=y
+CONFIG_FEATURE_FANCY_HEAD=y
+CONFIG_HOSTID=y
+CONFIG_ID=y
+CONFIG_INSTALL=y
+CONFIG_FEATURE_INSTALL_LONG_OPTIONS=y
+CONFIG_LENGTH=y
+CONFIG_LN=y
+CONFIG_LOGNAME=y
+CONFIG_LS=y
+CONFIG_FEATURE_LS_FILETYPES=y
+CONFIG_FEATURE_LS_FOLLOWLINKS=y
+CONFIG_FEATURE_LS_RECURSIVE=y
+CONFIG_FEATURE_LS_SORTFILES=y
+CONFIG_FEATURE_LS_TIMESTAMPS=y
+CONFIG_FEATURE_LS_USERNAME=y
+CONFIG_FEATURE_LS_COLOR=y
+CONFIG_FEATURE_LS_COLOR_IS_DEFAULT=y
+CONFIG_MD5SUM=y
+CONFIG_MKDIR=y
+CONFIG_FEATURE_MKDIR_LONG_OPTIONS=y
+CONFIG_MKFIFO=y
+CONFIG_MKNOD=y
+CONFIG_MV=y
+CONFIG_FEATURE_MV_LONG_OPTIONS=y
+CONFIG_NICE=y
+CONFIG_NOHUP=y
+CONFIG_OD=y
+CONFIG_PRINTENV=y
+CONFIG_PRINTF=y
+CONFIG_PWD=y
+CONFIG_READLINK=y
+CONFIG_FEATURE_READLINK_FOLLOW=y
+CONFIG_REALPATH=y
+CONFIG_RM=y
+CONFIG_RMDIR=y
+# CONFIG_FEATURE_RMDIR_LONG_OPTIONS is not set
+CONFIG_SEQ=y
+CONFIG_SHA1SUM=y
+CONFIG_SLEEP=y
+CONFIG_FEATURE_FANCY_SLEEP=y
+CONFIG_SORT=y
+CONFIG_FEATURE_SORT_BIG=y
+CONFIG_SPLIT=y
+CONFIG_FEATURE_SPLIT_FANCY=y
+CONFIG_STAT=y
+CONFIG_FEATURE_STAT_FORMAT=y
+CONFIG_STTY=y
+CONFIG_SUM=y
+CONFIG_SYNC=y
+CONFIG_TAC=y
+CONFIG_TAIL=y
+CONFIG_FEATURE_FANCY_TAIL=y
+CONFIG_TEE=y
+CONFIG_FEATURE_TEE_USE_BLOCK_IO=y
+CONFIG_TEST=y
+CONFIG_FEATURE_TEST_64=y
+CONFIG_TOUCH=y
+CONFIG_TR=y
+CONFIG_FEATURE_TR_CLASSES=y
+CONFIG_FEATURE_TR_EQUIV=y
+CONFIG_TRUE=y
+CONFIG_TTY=y
+CONFIG_UNAME=y
+CONFIG_UNEXPAND=y
+CONFIG_FEATURE_UNEXPAND_LONG_OPTIONS=y
+CONFIG_UNIQ=y
+CONFIG_USLEEP=y
+CONFIG_UUDECODE=y
+CONFIG_UUENCODE=y
+CONFIG_WC=y
+CONFIG_FEATURE_WC_LARGE=y
+CONFIG_WHO=y
+CONFIG_WHOAMI=y
+CONFIG_YES=y
+
+#
+# Common options for cp and mv
+#
+CONFIG_FEATURE_PRESERVE_HARDLINKS=y
+
+#
+# Common options for ls, more and telnet
+#
+CONFIG_FEATURE_AUTOWIDTH=y
+
+#
+# Common options for df, du, ls
+#
+CONFIG_FEATURE_HUMAN_READABLE=y
+
+#
+# Common options for md5sum, sha1sum
+#
+CONFIG_FEATURE_MD5_SHA1_SUM_CHECK=y
+
+#
+# Console Utilities
+#
+CONFIG_CHVT=y
+CONFIG_CLEAR=y
+CONFIG_DEALLOCVT=y
+CONFIG_DUMPKMAP=y
+CONFIG_KBD_MODE=y
+CONFIG_LOADFONT=y
+CONFIG_LOADKMAP=y
+CONFIG_OPENVT=y
+CONFIG_RESET=y
+CONFIG_RESIZE=y
+CONFIG_FEATURE_RESIZE_PRINT=y
+CONFIG_SETCONSOLE=y
+CONFIG_FEATURE_SETCONSOLE_LONG_OPTIONS=y
+CONFIG_SETKEYCODES=y
+CONFIG_SETLOGCONS=y
+
+#
+# Debian Utilities
+#
+CONFIG_MKTEMP=y
+CONFIG_PIPE_PROGRESS=y
+CONFIG_RUN_PARTS=y
+CONFIG_FEATURE_RUN_PARTS_LONG_OPTIONS=y
+CONFIG_FEATURE_RUN_PARTS_FANCY=y
+CONFIG_START_STOP_DAEMON=y
+CONFIG_FEATURE_START_STOP_DAEMON_FANCY=y
+CONFIG_FEATURE_START_STOP_DAEMON_LONG_OPTIONS=y
+CONFIG_WHICH=y
+
+#
+# Editors
+#
+CONFIG_AWK=y
+CONFIG_FEATURE_AWK_MATH=y
+CONFIG_CMP=y
+CONFIG_DIFF=y
+CONFIG_FEATURE_DIFF_BINARY=y
+CONFIG_FEATURE_DIFF_DIR=y
+CONFIG_FEATURE_DIFF_MINIMAL=y
+CONFIG_ED=y
+CONFIG_PATCH=y
+CONFIG_SED=y
+CONFIG_VI=y
+CONFIG_FEATURE_VI_MAX_LEN=1024
+CONFIG_FEATURE_VI_8BIT=y
+CONFIG_FEATURE_VI_COLON=y
+CONFIG_FEATURE_VI_YANKMARK=y
+CONFIG_FEATURE_VI_SEARCH=y
+CONFIG_FEATURE_VI_USE_SIGNALS=y
+CONFIG_FEATURE_VI_DOT_CMD=y
+CONFIG_FEATURE_VI_READONLY=y
+CONFIG_FEATURE_VI_SETOPTS=y
+CONFIG_FEATURE_VI_SET=y
+CONFIG_FEATURE_VI_WIN_RESIZE=y
+CONFIG_FEATURE_VI_OPTIMIZE_CURSOR=y
+CONFIG_FEATURE_ALLOW_EXEC=y
+
+#
+# Finding Utilities
+#
+CONFIG_FIND=y
+CONFIG_FEATURE_FIND_PRINT0=y
+CONFIG_FEATURE_FIND_MTIME=y
+CONFIG_FEATURE_FIND_MMIN=y
+CONFIG_FEATURE_FIND_PERM=y
+CONFIG_FEATURE_FIND_TYPE=y
+CONFIG_FEATURE_FIND_XDEV=y
+CONFIG_FEATURE_FIND_MAXDEPTH=y
+CONFIG_FEATURE_FIND_NEWER=y
+CONFIG_FEATURE_FIND_INUM=y
+CONFIG_FEATURE_FIND_EXEC=y
+CONFIG_FEATURE_FIND_USER=y
+CONFIG_FEATURE_FIND_GROUP=y
+CONFIG_FEATURE_FIND_NOT=y
+CONFIG_FEATURE_FIND_DEPTH=y
+CONFIG_FEATURE_FIND_PAREN=y
+CONFIG_FEATURE_FIND_SIZE=y
+CONFIG_FEATURE_FIND_PRUNE=y
+# CONFIG_FEATURE_FIND_DELETE is not set
+CONFIG_FEATURE_FIND_PATH=y
+CONFIG_FEATURE_FIND_REGEX=y
+# CONFIG_FEATURE_FIND_CONTEXT is not set
+CONFIG_GREP=y
+CONFIG_FEATURE_GREP_EGREP_ALIAS=y
+CONFIG_FEATURE_GREP_FGREP_ALIAS=y
+CONFIG_FEATURE_GREP_CONTEXT=y
+CONFIG_XARGS=y
+CONFIG_FEATURE_XARGS_SUPPORT_CONFIRMATION=y
+CONFIG_FEATURE_XARGS_SUPPORT_QUOTES=y
+CONFIG_FEATURE_XARGS_SUPPORT_TERMOPT=y
+CONFIG_FEATURE_XARGS_SUPPORT_ZERO_TERM=y
+
+#
+# Init Utilities
+#
+CONFIG_INIT=y
+# CONFIG_DEBUG_INIT is not set
+CONFIG_FEATURE_USE_INITTAB=y
+CONFIG_FEATURE_KILL_REMOVED=y
+CONFIG_FEATURE_KILL_DELAY=10
+CONFIG_FEATURE_INIT_SCTTY=y
+CONFIG_FEATURE_INIT_SYSLOG=y
+CONFIG_FEATURE_EXTRA_QUIET=y
+# CONFIG_FEATURE_INIT_COREDUMPS is not set
+# CONFIG_FEATURE_INITRD is not set
+CONFIG_HALT=y
+CONFIG_MESG=y
+
+#
+# Login/Password Management Utilities
+#
+CONFIG_FEATURE_SHADOWPASSWDS=y
+# CONFIG_USE_BB_PWD_GRP is not set
+# CONFIG_USE_BB_SHADOW is not set
+CONFIG_USE_BB_CRYPT=y
+CONFIG_ADDGROUP=y
+CONFIG_FEATURE_ADDUSER_TO_GROUP=y
+CONFIG_DELGROUP=y
+CONFIG_FEATURE_DEL_USER_FROM_GROUP=y
+CONFIG_FEATURE_CHECK_NAMES=y
+CONFIG_ADDUSER=y
+# CONFIG_FEATURE_ADDUSER_LONG_OPTIONS is not set
+CONFIG_DELUSER=y
+CONFIG_GETTY=y
+CONFIG_FEATURE_UTMP=y
+CONFIG_FEATURE_WTMP=y
+CONFIG_LOGIN=y
+# CONFIG_PAM is not set
+CONFIG_LOGIN_SCRIPTS=y
+CONFIG_FEATURE_NOLOGIN=y
+# CONFIG_FEATURE_SECURETTY is not set
+CONFIG_PASSWD=y
+CONFIG_FEATURE_PASSWD_WEAK_CHECK=y
+CONFIG_CRYPTPW=y
+CONFIG_CHPASSWD=y
+CONFIG_SU=y
+CONFIG_FEATURE_SU_SYSLOG=y
+CONFIG_FEATURE_SU_CHECKS_SHELLS=y
+CONFIG_SULOGIN=y
+CONFIG_VLOCK=y
+
+#
+# Linux Ext2 FS Progs
+#
+CONFIG_CHATTR=y
+CONFIG_FSCK=y
+CONFIG_LSATTR=y
+
+#
+# Linux Module Utilities
+#
+CONFIG_DEPMOD=y
+# CONFIG_FEATURE_DEPMOD_PRUNE_FANCY is not set
+CONFIG_FEATURE_DEPMOD_ALIAS=y
+CONFIG_INSMOD=y
+# CONFIG_FEATURE_INSMOD_VERSION_CHECKING is not set
+CONFIG_FEATURE_INSMOD_KSYMOOPS_SYMBOLS=y
+# CONFIG_FEATURE_INSMOD_LOADINKMEM is not set
+# CONFIG_FEATURE_INSMOD_LOAD_MAP is not set
+# CONFIG_FEATURE_INSMOD_LOAD_MAP_FULL is not set
+CONFIG_RMMOD=y
+CONFIG_LSMOD=y
+CONFIG_FEATURE_LSMOD_PRETTY_2_6_OUTPUT=y
+CONFIG_MODPROBE=y
+CONFIG_FEATURE_MODPROBE_MULTIPLE_OPTIONS=y
+CONFIG_FEATURE_MODPROBE_FANCY_ALIAS=y
+CONFIG_FEATURE_MODPROBE_BLACKLIST=y
+
+#
+# Options common to multiple modutils
+#
+CONFIG_FEATURE_CHECK_TAINTED_MODULE=y
+CONFIG_FEATURE_2_4_MODULES=y
+CONFIG_FEATURE_2_6_MODULES=y
+CONFIG_DEFAULT_MODULES_DIR="/lib/modules"
+CONFIG_DEFAULT_DEPMOD_FILE="modules.dep"
+# CONFIG_FEATURE_QUERY_MODULE_INTERFACE is not set
+
+#
+# Linux System Utilities
+#
+CONFIG_DMESG=y
+CONFIG_FEATURE_DMESG_PRETTY=y
+CONFIG_FBSET=y
+CONFIG_FEATURE_FBSET_FANCY=y
+CONFIG_FEATURE_FBSET_READMODE=y
+CONFIG_FDFLUSH=y
+CONFIG_FDFORMAT=y
+CONFIG_FDISK=y
+CONFIG_FDISK_SUPPORT_LARGE_DISKS=y
+CONFIG_FEATURE_FDISK_WRITABLE=y
+# CONFIG_FEATURE_AIX_LABEL is not set
+# CONFIG_FEATURE_SGI_LABEL is not set
+# CONFIG_FEATURE_SUN_LABEL is not set
+CONFIG_FEATURE_OSF_LABEL=y
+CONFIG_FEATURE_FDISK_ADVANCED=y
+# CONFIG_FINDFS is not set
+CONFIG_FREERAMDISK=y
+CONFIG_FSCK_MINIX=y
+CONFIG_MKFS_MINIX=y
+
+#
+# Minix filesystem support
+#
+CONFIG_FEATURE_MINIX2=y
+CONFIG_GETOPT=y
+CONFIG_HEXDUMP=y
+CONFIG_FEATURE_HEXDUMP_REVERSE=y
+CONFIG_HD=y
+CONFIG_HWCLOCK=y
+CONFIG_FEATURE_HWCLOCK_LONG_OPTIONS=y
+CONFIG_FEATURE_HWCLOCK_ADJTIME_FHS=y
+CONFIG_IPCRM=y
+CONFIG_IPCS=y
+CONFIG_LOSETUP=y
+CONFIG_MDEV=y
+CONFIG_FEATURE_MDEV_CONF=y
+CONFIG_FEATURE_MDEV_RENAME=y
+CONFIG_FEATURE_MDEV_RENAME_REGEXP=y
+CONFIG_FEATURE_MDEV_EXEC=y
+CONFIG_FEATURE_MDEV_LOAD_FIRMWARE=y
+CONFIG_MKSWAP=y
+CONFIG_FEATURE_MKSWAP_V0=y
+CONFIG_MORE=y
+CONFIG_FEATURE_USE_TERMIOS=y
+CONFIG_VOLUMEID=y
+CONFIG_FEATURE_VOLUMEID_EXT=y
+CONFIG_FEATURE_VOLUMEID_REISERFS=y
+CONFIG_FEATURE_VOLUMEID_FAT=y
+CONFIG_FEATURE_VOLUMEID_HFS=y
+CONFIG_FEATURE_VOLUMEID_JFS=y
+CONFIG_FEATURE_VOLUMEID_XFS=y
+CONFIG_FEATURE_VOLUMEID_NTFS=y
+CONFIG_FEATURE_VOLUMEID_ISO9660=y
+CONFIG_FEATURE_VOLUMEID_UDF=y
+CONFIG_FEATURE_VOLUMEID_LUKS=y
+CONFIG_FEATURE_VOLUMEID_LINUXSWAP=y
+CONFIG_FEATURE_VOLUMEID_CRAMFS=y
+CONFIG_FEATURE_VOLUMEID_ROMFS=y
+CONFIG_FEATURE_VOLUMEID_SYSV=y
+# CONFIG_FEATURE_VOLUMEID_OCFS2 is not set
+CONFIG_FEATURE_VOLUMEID_LINUXRAID=y
+CONFIG_MOUNT=y
+CONFIG_FEATURE_MOUNT_FAKE=y
+# CONFIG_FEATURE_MOUNT_VERBOSE is not set
+CONFIG_FEATURE_MOUNT_HELPERS=y
+CONFIG_FEATURE_MOUNT_LABEL=y
+CONFIG_FEATURE_MOUNT_NFS=y
+CONFIG_FEATURE_MOUNT_CIFS=y
+CONFIG_FEATURE_MOUNT_FLAGS=y
+CONFIG_FEATURE_MOUNT_FSTAB=y
+CONFIG_PIVOT_ROOT=y
+CONFIG_RDATE=y
+CONFIG_READPROFILE=y
+CONFIG_RTCWAKE=y
+CONFIG_SCRIPT=y
+CONFIG_SETARCH=y
+CONFIG_SWAPONOFF=y
+CONFIG_FEATURE_SWAPON_PRI=y
+CONFIG_SWITCH_ROOT=y
+CONFIG_UMOUNT=y
+CONFIG_FEATURE_UMOUNT_ALL=y
+
+#
+# Common options for mount/umount
+#
+CONFIG_FEATURE_MOUNT_LOOP=y
+CONFIG_FEATURE_MTAB_SUPPORT=y
+
+#
+# Miscellaneous Utilities
+#
+CONFIG_ADJTIMEX=y
+CONFIG_BBCONFIG=y
+CONFIG_CHAT=y
+CONFIG_FEATURE_CHAT_NOFAIL=y
+# CONFIG_FEATURE_CHAT_TTY_HIFI is not set
+CONFIG_FEATURE_CHAT_IMPLICIT_CR=y
+# CONFIG_FEATURE_CHAT_SWALLOW_OPTS is not set
+# CONFIG_FEATURE_CHAT_SEND_ESCAPES is not set
+# CONFIG_FEATURE_CHAT_VAR_ABORT_LEN is not set
+# CONFIG_FEATURE_CHAT_CLR_ABORT is not set
+CONFIG_CHRT=y
+CONFIG_CROND=y
+# CONFIG_DEBUG_CROND_OPTION is not set
+# CONFIG_FEATURE_CROND_CALL_SENDMAIL is not set
+CONFIG_CRONTAB=y
+CONFIG_DC=y
+# CONFIG_DEVFSD is not set
+# CONFIG_DEVFSD_MODLOAD is not set
+# CONFIG_DEVFSD_FG_NP is not set
+# CONFIG_DEVFSD_VERBOSE is not set
+# CONFIG_FEATURE_DEVFS is not set
+CONFIG_EJECT=y
+CONFIG_FEATURE_EJECT_SCSI=y
+CONFIG_FBSPLASH=y
+CONFIG_INOTIFYD=y
+CONFIG_LAST=y
+CONFIG_FEATURE_LAST_SMALL=y
+# CONFIG_FEATURE_LAST_FANCY is not set
+CONFIG_LESS=y
+CONFIG_FEATURE_LESS_MAXLINES=9999999
+CONFIG_FEATURE_LESS_BRACKETS=y
+CONFIG_FEATURE_LESS_FLAGS=y
+CONFIG_FEATURE_LESS_FLAGCS=y
+CONFIG_FEATURE_LESS_MARKS=y
+CONFIG_FEATURE_LESS_REGEXP=y
+CONFIG_HDPARM=y
+CONFIG_FEATURE_HDPARM_GET_IDENTITY=y
+CONFIG_FEATURE_HDPARM_HDIO_SCAN_HWIF=y
+CONFIG_FEATURE_HDPARM_HDIO_UNREGISTER_HWIF=y
+CONFIG_FEATURE_HDPARM_HDIO_DRIVE_RESET=y
+CONFIG_FEATURE_HDPARM_HDIO_TRISTATE_HWIF=y
+CONFIG_FEATURE_HDPARM_HDIO_GETSET_DMA=y
+CONFIG_MAKEDEVS=y
+# CONFIG_FEATURE_MAKEDEVS_LEAF is not set
+CONFIG_FEATURE_MAKEDEVS_TABLE=y
+# CONFIG_MAN is not set
+# CONFIG_MICROCOM is not set
+CONFIG_MOUNTPOINT=y
+CONFIG_MT=y
+CONFIG_RAIDAUTORUN=y
+CONFIG_READAHEAD=y
+CONFIG_RUNLEVEL=y
+CONFIG_RX=y
+CONFIG_SETSID=y
+CONFIG_STRINGS=y
+CONFIG_TASKSET=y
+CONFIG_FEATURE_TASKSET_FANCY=y
+CONFIG_TIME=y
+CONFIG_TTYSIZE=y
+CONFIG_WATCHDOG=y
+
+#
+# Networking Utilities
+#
+CONFIG_FEATURE_IPV6=y
+CONFIG_FEATURE_PREFER_IPV4_ADDRESS=y
+# CONFIG_VERBOSE_RESOLUTION_ERRORS is not set
+CONFIG_ARP=y
+CONFIG_ARPING=y
+CONFIG_BRCTL=y
+# CONFIG_FEATURE_BRCTL_FANCY is not set
+# CONFIG_FEATURE_BRCTL_SHOW is not set
+CONFIG_DNSD=y
+CONFIG_ETHER_WAKE=y
+CONFIG_FAKEIDENTD=y
+CONFIG_FTPGET=y
+CONFIG_FTPPUT=y
+CONFIG_FEATURE_FTPGETPUT_LONG_OPTIONS=y
+CONFIG_HOSTNAME=y
+# CONFIG_HTTPD is not set
+# CONFIG_FEATURE_HTTPD_RANGES is not set
+# CONFIG_FEATURE_HTTPD_USE_SENDFILE is not set
+# CONFIG_FEATURE_HTTPD_RELOAD_CONFIG_SIGHUP is not set
+# CONFIG_FEATURE_HTTPD_SETUID is not set
+# CONFIG_FEATURE_HTTPD_BASIC_AUTH is not set
+# CONFIG_FEATURE_HTTPD_AUTH_MD5 is not set
+# CONFIG_FEATURE_HTTPD_CONFIG_WITH_MIME_TYPES is not set
+# CONFIG_FEATURE_HTTPD_CGI is not set
+# CONFIG_FEATURE_HTTPD_CONFIG_WITH_SCRIPT_INTERPR is not set
+# CONFIG_FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV is not set
+# CONFIG_FEATURE_HTTPD_ENCODE_URL_STR is not set
+# CONFIG_FEATURE_HTTPD_ERROR_PAGES is not set
+# CONFIG_FEATURE_HTTPD_PROXY is not set
+CONFIG_IFCONFIG=y
+CONFIG_FEATURE_IFCONFIG_STATUS=y
+CONFIG_FEATURE_IFCONFIG_SLIP=y
+CONFIG_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ=y
+CONFIG_FEATURE_IFCONFIG_HW=y
+CONFIG_FEATURE_IFCONFIG_BROADCAST_PLUS=y
+CONFIG_IFENSLAVE=y
+CONFIG_IFUPDOWN=y
+CONFIG_IFUPDOWN_IFSTATE_PATH="/var/run/ifstate"
+CONFIG_FEATURE_IFUPDOWN_IP=y
+CONFIG_FEATURE_IFUPDOWN_IP_BUILTIN=y
+# CONFIG_FEATURE_IFUPDOWN_IFCONFIG_BUILTIN is not set
+CONFIG_FEATURE_IFUPDOWN_IPV4=y
+CONFIG_FEATURE_IFUPDOWN_IPV6=y
+CONFIG_FEATURE_IFUPDOWN_MAPPING=y
+CONFIG_FEATURE_IFUPDOWN_EXTERNAL_DHCP=y
+# CONFIG_INETD is not set
+# CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_ECHO is not set
+# CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DISCARD is not set
+# CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_TIME is not set
+# CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DAYTIME is not set
+# CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_CHARGEN is not set
+# CONFIG_FEATURE_INETD_RPC is not set
+CONFIG_IP=y
+CONFIG_FEATURE_IP_ADDRESS=y
+CONFIG_FEATURE_IP_LINK=y
+CONFIG_FEATURE_IP_ROUTE=y
+CONFIG_FEATURE_IP_TUNNEL=y
+CONFIG_FEATURE_IP_RULE=y
+CONFIG_FEATURE_IP_SHORT_FORMS=y
+# CONFIG_FEATURE_IP_RARE_PROTOCOLS is not set
+CONFIG_IPADDR=y
+CONFIG_IPLINK=y
+CONFIG_IPROUTE=y
+CONFIG_IPTUNNEL=y
+CONFIG_IPRULE=y
+CONFIG_IPCALC=y
+CONFIG_FEATURE_IPCALC_FANCY=y
+CONFIG_FEATURE_IPCALC_LONG_OPTIONS=y
+CONFIG_NAMEIF=y
+# CONFIG_FEATURE_NAMEIF_EXTENDED is not set
+CONFIG_NC=y
+CONFIG_NC_SERVER=y
+CONFIG_NC_EXTRA=y
+CONFIG_NETSTAT=y
+# CONFIG_FEATURE_NETSTAT_WIDE is not set
+CONFIG_NSLOOKUP=y
+CONFIG_PING=y
+CONFIG_PING6=y
+CONFIG_FEATURE_FANCY_PING=y
+CONFIG_PSCAN=y
+CONFIG_ROUTE=y
+# CONFIG_SENDMAIL is not set
+# CONFIG_FETCHMAIL is not set
+CONFIG_SLATTACH=y
+CONFIG_TELNET=y
+CONFIG_FEATURE_TELNET_TTYPE=y
+CONFIG_FEATURE_TELNET_AUTOLOGIN=y
+CONFIG_TELNETD=y
+CONFIG_FEATURE_TELNETD_STANDALONE=y
+CONFIG_TFTP=y
+# CONFIG_TFTPD is not set
+CONFIG_FEATURE_TFTP_GET=y
+CONFIG_FEATURE_TFTP_PUT=y
+CONFIG_FEATURE_TFTP_BLOCKSIZE=y
+# CONFIG_DEBUG_TFTP is not set
+CONFIG_TRACEROUTE=y
+# CONFIG_FEATURE_TRACEROUTE_VERBOSE is not set
+# CONFIG_FEATURE_TRACEROUTE_SOURCE_ROUTE is not set
+# CONFIG_FEATURE_TRACEROUTE_USE_ICMP is not set
+# CONFIG_APP_UDHCPD is not set
+# CONFIG_APP_DHCPRELAY is not set
+# CONFIG_APP_DUMPLEASES is not set
+# CONFIG_FEATURE_UDHCPD_WRITE_LEASES_EARLY is not set
+CONFIG_DHCPD_LEASES_FILE=""
+# CONFIG_APP_UDHCPC is not set
+# CONFIG_FEATURE_UDHCPC_ARPING is not set
+# CONFIG_FEATURE_UDHCP_PORT is not set
+# CONFIG_FEATURE_UDHCP_DEBUG is not set
+# CONFIG_FEATURE_RFC3397 is not set
+CONFIG_DHCPC_DEFAULT_SCRIPT=""
+CONFIG_UDHCPC_SLACK_FOR_BUGGY_SERVERS=
+CONFIG_VCONFIG=y
+CONFIG_WGET=y
+CONFIG_FEATURE_WGET_STATUSBAR=y
+CONFIG_FEATURE_WGET_AUTHENTICATION=y
+CONFIG_FEATURE_WGET_LONG_OPTIONS=y
+CONFIG_ZCIP=y
+CONFIG_TCPSVD=y
+CONFIG_UDPSVD=y
+
+#
+# Process Utilities
+#
+CONFIG_FREE=y
+CONFIG_FUSER=y
+CONFIG_KILL=y
+CONFIG_KILLALL=y
+CONFIG_KILLALL5=y
+CONFIG_NMETER=y
+CONFIG_PGREP=y
+CONFIG_PIDOF=y
+CONFIG_FEATURE_PIDOF_SINGLE=y
+CONFIG_FEATURE_PIDOF_OMIT=y
+CONFIG_PKILL=y
+CONFIG_PS=y
+CONFIG_FEATURE_PS_WIDE=y
+CONFIG_FEATURE_PS_TIME=y
+# CONFIG_FEATURE_PS_UNUSUAL_SYSTEMS is not set
+CONFIG_RENICE=y
+CONFIG_BB_SYSCTL=y
+CONFIG_TOP=y
+CONFIG_FEATURE_TOP_CPU_USAGE_PERCENTAGE=y
+CONFIG_FEATURE_TOP_CPU_GLOBAL_PERCENTS=y
+CONFIG_FEATURE_TOP_DECIMALS=y
+CONFIG_FEATURE_TOPMEM=y
+CONFIG_UPTIME=y
+CONFIG_WATCH=y
+
+#
+# Shells
+#
+CONFIG_FEATURE_SH_IS_ASH=y
+# CONFIG_FEATURE_SH_IS_HUSH is not set
+# CONFIG_FEATURE_SH_IS_MSH is not set
+# CONFIG_FEATURE_SH_IS_NONE is not set
+CONFIG_ASH=y
+
+#
+# Ash Shell Options
+#
+CONFIG_ASH_BASH_COMPAT=y
+CONFIG_ASH_JOB_CONTROL=y
+CONFIG_ASH_READ_NCHARS=y
+CONFIG_ASH_READ_TIMEOUT=y
+CONFIG_ASH_ALIAS=y
+CONFIG_ASH_MATH_SUPPORT=y
+CONFIG_ASH_MATH_SUPPORT_64=y
+CONFIG_ASH_GETOPTS=y
+CONFIG_ASH_BUILTIN_ECHO=y
+CONFIG_ASH_BUILTIN_PRINTF=y
+CONFIG_ASH_BUILTIN_TEST=y
+CONFIG_ASH_CMDCMD=y
+CONFIG_ASH_MAIL=y
+CONFIG_ASH_OPTIMIZE_FOR_SIZE=y
+CONFIG_ASH_RANDOM_SUPPORT=y
+CONFIG_ASH_EXPAND_PRMT=y
+# CONFIG_HUSH is not set
+# CONFIG_HUSH_HELP is not set
+# CONFIG_HUSH_INTERACTIVE is not set
+# CONFIG_HUSH_JOB is not set
+# CONFIG_HUSH_TICK is not set
+# CONFIG_HUSH_IF is not set
+# CONFIG_HUSH_LOOPS is not set
+# CONFIG_LASH is not set
+# CONFIG_MSH is not set
+
+#
+# Bourne Shell Options
+#
+CONFIG_FEATURE_SH_EXTRA_QUIET=y
+# CONFIG_FEATURE_SH_STANDALONE is not set
+# CONFIG_FEATURE_SH_NOFORK is not set
+CONFIG_CTTYHACK=y
+
+#
+# System Logging Utilities
+#
+CONFIG_SYSLOGD=y
+CONFIG_FEATURE_ROTATE_LOGFILE=y
+CONFIG_FEATURE_REMOTE_LOG=y
+# CONFIG_FEATURE_SYSLOGD_DUP is not set
+CONFIG_FEATURE_IPC_SYSLOG=y
+CONFIG_FEATURE_IPC_SYSLOG_BUFFER_SIZE=16
+CONFIG_LOGREAD=y
+CONFIG_FEATURE_LOGREAD_REDUCED_LOCKING=y
+CONFIG_KLOGD=y
+CONFIG_LOGGER=y
+
+#
+# Runit Utilities
+#
+CONFIG_RUNSV=y
+CONFIG_RUNSVDIR=y
+CONFIG_SV=y
+CONFIG_SVLOGD=y
+CONFIG_CHPST=y
+CONFIG_SETUIDGID=y
+CONFIG_ENVUIDGID=y
+CONFIG_ENVDIR=y
+CONFIG_SOFTLIMIT=y
+# CONFIG_CHCON is not set
+# CONFIG_FEATURE_CHCON_LONG_OPTIONS is not set
+# CONFIG_GETENFORCE is not set
+# CONFIG_GETSEBOOL is not set
+# CONFIG_LOAD_POLICY is not set
+# CONFIG_MATCHPATHCON is not set
+# CONFIG_RESTORECON is not set
+# CONFIG_RUNCON is not set
+# CONFIG_FEATURE_RUNCON_LONG_OPTIONS is not set
+# CONFIG_SELINUXENABLED is not set
+# CONFIG_SETENFORCE is not set
+# CONFIG_SETFILES is not set
+# CONFIG_FEATURE_SETFILES_CHECK_OPTION is not set
+# CONFIG_SETSEBOOL is not set
+# CONFIG_SESTATUS is not set
+
+#
+# Print Utilities
+#
+# CONFIG_LPD is not set
+CONFIG_LPR=y
+# CONFIG_LPQ is not set
diff --git a/source/a/mkinitrd/archive/busybox-dot-config.1.12.0 b/source/a/mkinitrd/archive/busybox-dot-config.1.12.0
new file mode 100644
index 00000000..b462fe9a
--- /dev/null
+++ b/source/a/mkinitrd/archive/busybox-dot-config.1.12.0
@@ -0,0 +1,857 @@
+#
+# Automatically generated make config: don't edit
+# Busybox version: 1.12.0
+# Thu Sep 25 12:38:54 2008
+#
+CONFIG_HAVE_DOT_CONFIG=y
+
+#
+# Busybox Settings
+#
+
+#
+# General Configuration
+#
+CONFIG_DESKTOP=y
+# CONFIG_EXTRA_COMPAT is not set
+# CONFIG_FEATURE_ASSUME_UNICODE is not set
+CONFIG_FEATURE_BUFFERS_USE_MALLOC=y
+# CONFIG_FEATURE_BUFFERS_GO_ON_STACK is not set
+# CONFIG_FEATURE_BUFFERS_GO_IN_BSS is not set
+CONFIG_SHOW_USAGE=y
+CONFIG_FEATURE_VERBOSE_USAGE=y
+CONFIG_FEATURE_COMPRESS_USAGE=y
+CONFIG_FEATURE_INSTALLER=y
+CONFIG_LOCALE_SUPPORT=y
+CONFIG_GETOPT_LONG=y
+CONFIG_FEATURE_DEVPTS=y
+# CONFIG_FEATURE_CLEAN_UP is not set
+CONFIG_FEATURE_PIDFILE=y
+CONFIG_FEATURE_SUID=y
+CONFIG_FEATURE_SUID_CONFIG=y
+CONFIG_FEATURE_SUID_CONFIG_QUIET=y
+# CONFIG_SELINUX is not set
+# CONFIG_FEATURE_PREFER_APPLETS is not set
+CONFIG_BUSYBOX_EXEC_PATH="/proc/self/exe"
+CONFIG_FEATURE_SYSLOG=y
+CONFIG_FEATURE_HAVE_RPC=y
+
+#
+# Build Options
+#
+CONFIG_STATIC=y
+# CONFIG_PIE is not set
+# CONFIG_NOMMU is not set
+# CONFIG_BUILD_LIBBUSYBOX is not set
+# CONFIG_FEATURE_INDIVIDUAL is not set
+# CONFIG_FEATURE_SHARED_BUSYBOX is not set
+CONFIG_LFS=y
+CONFIG_CROSS_COMPILER_PREFIX=""
+
+#
+# Debugging Options
+#
+# CONFIG_DEBUG is not set
+# CONFIG_DEBUG_PESSIMIZE is not set
+# CONFIG_WERROR is not set
+CONFIG_NO_DEBUG_LIB=y
+# CONFIG_DMALLOC is not set
+# CONFIG_EFENCE is not set
+CONFIG_INCLUDE_SUSv2=y
+# CONFIG_PARSE is not set
+
+#
+# Installation Options
+#
+CONFIG_INSTALL_NO_USR=y
+CONFIG_INSTALL_APPLET_SYMLINKS=y
+# CONFIG_INSTALL_APPLET_HARDLINKS is not set
+# CONFIG_INSTALL_APPLET_SCRIPT_WRAPPERS is not set
+# CONFIG_INSTALL_APPLET_DONT is not set
+# CONFIG_INSTALL_SH_APPLET_SYMLINK is not set
+# CONFIG_INSTALL_SH_APPLET_HARDLINK is not set
+# CONFIG_INSTALL_SH_APPLET_SCRIPT_WRAPPER is not set
+CONFIG_PREFIX="./_install"
+
+#
+# Busybox Library Tuning
+#
+CONFIG_PASSWORD_MINLEN=6
+CONFIG_MD5_SIZE_VS_SPEED=2
+# CONFIG_FEATURE_FAST_TOP is not set
+# CONFIG_FEATURE_ETC_NETWORKS is not set
+CONFIG_FEATURE_EDITING=y
+CONFIG_FEATURE_EDITING_MAX_LEN=1024
+CONFIG_FEATURE_EDITING_VI=y
+CONFIG_FEATURE_EDITING_HISTORY=64
+# CONFIG_FEATURE_EDITING_SAVEHISTORY is not set
+CONFIG_FEATURE_TAB_COMPLETION=y
+# CONFIG_FEATURE_USERNAME_COMPLETION is not set
+CONFIG_FEATURE_EDITING_FANCY_PROMPT=y
+CONFIG_FEATURE_VERBOSE_CP_MESSAGE=y
+CONFIG_FEATURE_COPYBUF_KB=4
+CONFIG_MONOTONIC_SYSCALL=y
+CONFIG_IOCTL_HEX2STR_ERROR=y
+# CONFIG_FEATURE_HWIB is not set
+
+#
+# Applets
+#
+
+#
+# Archival Utilities
+#
+# CONFIG_FEATURE_SEAMLESS_LZMA is not set
+CONFIG_FEATURE_SEAMLESS_BZ2=y
+CONFIG_FEATURE_SEAMLESS_GZ=y
+CONFIG_FEATURE_SEAMLESS_Z=y
+CONFIG_AR=y
+CONFIG_FEATURE_AR_LONG_FILENAMES=y
+CONFIG_BUNZIP2=y
+CONFIG_BZIP2=y
+CONFIG_CPIO=y
+CONFIG_FEATURE_CPIO_O=y
+# CONFIG_DPKG is not set
+# CONFIG_DPKG_DEB is not set
+# CONFIG_FEATURE_DPKG_DEB_EXTRACT_ONLY is not set
+CONFIG_GUNZIP=y
+CONFIG_GZIP=y
+CONFIG_RPM2CPIO=y
+# CONFIG_RPM is not set
+CONFIG_TAR=y
+CONFIG_FEATURE_TAR_CREATE=y
+CONFIG_FEATURE_TAR_AUTODETECT=y
+CONFIG_FEATURE_TAR_FROM=y
+CONFIG_FEATURE_TAR_OLDGNU_COMPATIBILITY=y
+# CONFIG_FEATURE_TAR_OLDSUN_COMPATIBILITY is not set
+CONFIG_FEATURE_TAR_GNU_EXTENSIONS=y
+CONFIG_FEATURE_TAR_LONG_OPTIONS=y
+CONFIG_FEATURE_TAR_UNAME_GNAME=y
+CONFIG_UNCOMPRESS=y
+CONFIG_UNLZMA=y
+CONFIG_FEATURE_LZMA_FAST=y
+CONFIG_UNZIP=y
+
+#
+# Coreutils
+#
+CONFIG_BASENAME=y
+CONFIG_CAL=y
+CONFIG_CAT=y
+CONFIG_CATV=y
+CONFIG_CHGRP=y
+CONFIG_CHMOD=y
+CONFIG_CHOWN=y
+CONFIG_CHROOT=y
+CONFIG_CKSUM=y
+CONFIG_COMM=y
+CONFIG_CP=y
+CONFIG_CUT=y
+CONFIG_DATE=y
+CONFIG_FEATURE_DATE_ISOFMT=y
+CONFIG_DD=y
+CONFIG_FEATURE_DD_SIGNAL_HANDLING=y
+CONFIG_FEATURE_DD_IBS_OBS=y
+CONFIG_DF=y
+CONFIG_FEATURE_DF_INODE=y
+CONFIG_DIRNAME=y
+CONFIG_DOS2UNIX=y
+CONFIG_UNIX2DOS=y
+CONFIG_DU=y
+CONFIG_FEATURE_DU_DEFAULT_BLOCKSIZE_1K=y
+CONFIG_ECHO=y
+CONFIG_FEATURE_FANCY_ECHO=y
+CONFIG_ENV=y
+CONFIG_FEATURE_ENV_LONG_OPTIONS=y
+CONFIG_EXPAND=y
+CONFIG_FEATURE_EXPAND_LONG_OPTIONS=y
+CONFIG_EXPR=y
+CONFIG_EXPR_MATH_SUPPORT_64=y
+CONFIG_FALSE=y
+CONFIG_FOLD=y
+CONFIG_HEAD=y
+CONFIG_FEATURE_FANCY_HEAD=y
+CONFIG_HOSTID=y
+CONFIG_ID=y
+CONFIG_INSTALL=y
+CONFIG_FEATURE_INSTALL_LONG_OPTIONS=y
+CONFIG_LENGTH=y
+CONFIG_LN=y
+CONFIG_LOGNAME=y
+CONFIG_LS=y
+CONFIG_FEATURE_LS_FILETYPES=y
+CONFIG_FEATURE_LS_FOLLOWLINKS=y
+CONFIG_FEATURE_LS_RECURSIVE=y
+CONFIG_FEATURE_LS_SORTFILES=y
+CONFIG_FEATURE_LS_TIMESTAMPS=y
+CONFIG_FEATURE_LS_USERNAME=y
+CONFIG_FEATURE_LS_COLOR=y
+CONFIG_FEATURE_LS_COLOR_IS_DEFAULT=y
+CONFIG_MD5SUM=y
+CONFIG_MKDIR=y
+CONFIG_FEATURE_MKDIR_LONG_OPTIONS=y
+CONFIG_MKFIFO=y
+CONFIG_MKNOD=y
+CONFIG_MV=y
+CONFIG_FEATURE_MV_LONG_OPTIONS=y
+CONFIG_NICE=y
+CONFIG_NOHUP=y
+CONFIG_OD=y
+CONFIG_PRINTENV=y
+CONFIG_PRINTF=y
+CONFIG_PWD=y
+CONFIG_READLINK=y
+CONFIG_FEATURE_READLINK_FOLLOW=y
+CONFIG_REALPATH=y
+CONFIG_RM=y
+CONFIG_RMDIR=y
+# CONFIG_FEATURE_RMDIR_LONG_OPTIONS is not set
+CONFIG_SEQ=y
+CONFIG_SHA1SUM=y
+CONFIG_SLEEP=y
+CONFIG_FEATURE_FANCY_SLEEP=y
+# CONFIG_FEATURE_FLOAT_SLEEP is not set
+CONFIG_SORT=y
+CONFIG_FEATURE_SORT_BIG=y
+CONFIG_SPLIT=y
+CONFIG_FEATURE_SPLIT_FANCY=y
+CONFIG_STAT=y
+CONFIG_FEATURE_STAT_FORMAT=y
+CONFIG_STTY=y
+CONFIG_SUM=y
+CONFIG_SYNC=y
+CONFIG_TAC=y
+CONFIG_TAIL=y
+CONFIG_FEATURE_FANCY_TAIL=y
+CONFIG_TEE=y
+CONFIG_FEATURE_TEE_USE_BLOCK_IO=y
+CONFIG_TEST=y
+CONFIG_FEATURE_TEST_64=y
+CONFIG_TOUCH=y
+CONFIG_TR=y
+CONFIG_FEATURE_TR_CLASSES=y
+CONFIG_FEATURE_TR_EQUIV=y
+CONFIG_TRUE=y
+CONFIG_TTY=y
+CONFIG_UNAME=y
+CONFIG_UNEXPAND=y
+CONFIG_FEATURE_UNEXPAND_LONG_OPTIONS=y
+CONFIG_UNIQ=y
+CONFIG_USLEEP=y
+CONFIG_UUDECODE=y
+CONFIG_UUENCODE=y
+CONFIG_WC=y
+CONFIG_FEATURE_WC_LARGE=y
+CONFIG_WHO=y
+CONFIG_WHOAMI=y
+CONFIG_YES=y
+
+#
+# Common options for cp and mv
+#
+CONFIG_FEATURE_PRESERVE_HARDLINKS=y
+
+#
+# Common options for ls, more and telnet
+#
+CONFIG_FEATURE_AUTOWIDTH=y
+
+#
+# Common options for df, du, ls
+#
+CONFIG_FEATURE_HUMAN_READABLE=y
+
+#
+# Common options for md5sum, sha1sum
+#
+CONFIG_FEATURE_MD5_SHA1_SUM_CHECK=y
+
+#
+# Console Utilities
+#
+CONFIG_CHVT=y
+CONFIG_CLEAR=y
+CONFIG_DEALLOCVT=y
+CONFIG_DUMPKMAP=y
+CONFIG_KBD_MODE=y
+CONFIG_LOADFONT=y
+CONFIG_LOADKMAP=y
+CONFIG_OPENVT=y
+CONFIG_RESET=y
+CONFIG_RESIZE=y
+CONFIG_FEATURE_RESIZE_PRINT=y
+CONFIG_SETCONSOLE=y
+CONFIG_FEATURE_SETCONSOLE_LONG_OPTIONS=y
+CONFIG_SETFONT=y
+CONFIG_SETKEYCODES=y
+CONFIG_SETLOGCONS=y
+CONFIG_SHOWKEY=y
+
+#
+# Debian Utilities
+#
+CONFIG_MKTEMP=y
+CONFIG_PIPE_PROGRESS=y
+CONFIG_RUN_PARTS=y
+CONFIG_FEATURE_RUN_PARTS_LONG_OPTIONS=y
+CONFIG_FEATURE_RUN_PARTS_FANCY=y
+CONFIG_START_STOP_DAEMON=y
+CONFIG_FEATURE_START_STOP_DAEMON_FANCY=y
+CONFIG_FEATURE_START_STOP_DAEMON_LONG_OPTIONS=y
+CONFIG_WHICH=y
+
+#
+# Editors
+#
+CONFIG_AWK=y
+CONFIG_FEATURE_AWK_MATH=y
+CONFIG_CMP=y
+CONFIG_DIFF=y
+CONFIG_FEATURE_DIFF_BINARY=y
+CONFIG_FEATURE_DIFF_DIR=y
+CONFIG_FEATURE_DIFF_MINIMAL=y
+CONFIG_ED=y
+CONFIG_PATCH=y
+CONFIG_SED=y
+CONFIG_VI=y
+CONFIG_FEATURE_VI_MAX_LEN=1024
+CONFIG_FEATURE_VI_8BIT=y
+CONFIG_FEATURE_VI_COLON=y
+CONFIG_FEATURE_VI_YANKMARK=y
+CONFIG_FEATURE_VI_SEARCH=y
+CONFIG_FEATURE_VI_USE_SIGNALS=y
+CONFIG_FEATURE_VI_DOT_CMD=y
+CONFIG_FEATURE_VI_READONLY=y
+CONFIG_FEATURE_VI_SETOPTS=y
+CONFIG_FEATURE_VI_SET=y
+CONFIG_FEATURE_VI_WIN_RESIZE=y
+CONFIG_FEATURE_VI_OPTIMIZE_CURSOR=y
+CONFIG_FEATURE_ALLOW_EXEC=y
+
+#
+# Finding Utilities
+#
+CONFIG_FIND=y
+CONFIG_FEATURE_FIND_PRINT0=y
+CONFIG_FEATURE_FIND_MTIME=y
+CONFIG_FEATURE_FIND_MMIN=y
+CONFIG_FEATURE_FIND_PERM=y
+CONFIG_FEATURE_FIND_TYPE=y
+CONFIG_FEATURE_FIND_XDEV=y
+CONFIG_FEATURE_FIND_MAXDEPTH=y
+CONFIG_FEATURE_FIND_NEWER=y
+CONFIG_FEATURE_FIND_INUM=y
+CONFIG_FEATURE_FIND_EXEC=y
+CONFIG_FEATURE_FIND_USER=y
+CONFIG_FEATURE_FIND_GROUP=y
+CONFIG_FEATURE_FIND_NOT=y
+CONFIG_FEATURE_FIND_DEPTH=y
+CONFIG_FEATURE_FIND_PAREN=y
+CONFIG_FEATURE_FIND_SIZE=y
+CONFIG_FEATURE_FIND_PRUNE=y
+# CONFIG_FEATURE_FIND_DELETE is not set
+CONFIG_FEATURE_FIND_PATH=y
+CONFIG_FEATURE_FIND_REGEX=y
+# CONFIG_FEATURE_FIND_CONTEXT is not set
+CONFIG_GREP=y
+CONFIG_FEATURE_GREP_EGREP_ALIAS=y
+CONFIG_FEATURE_GREP_FGREP_ALIAS=y
+CONFIG_FEATURE_GREP_CONTEXT=y
+CONFIG_XARGS=y
+CONFIG_FEATURE_XARGS_SUPPORT_CONFIRMATION=y
+CONFIG_FEATURE_XARGS_SUPPORT_QUOTES=y
+CONFIG_FEATURE_XARGS_SUPPORT_TERMOPT=y
+CONFIG_FEATURE_XARGS_SUPPORT_ZERO_TERM=y
+
+#
+# Init Utilities
+#
+CONFIG_INIT=y
+# CONFIG_DEBUG_INIT is not set
+CONFIG_FEATURE_USE_INITTAB=y
+CONFIG_FEATURE_KILL_REMOVED=y
+CONFIG_FEATURE_KILL_DELAY=10
+CONFIG_FEATURE_INIT_SCTTY=y
+CONFIG_FEATURE_INIT_SYSLOG=y
+CONFIG_FEATURE_EXTRA_QUIET=y
+# CONFIG_FEATURE_INIT_COREDUMPS is not set
+# CONFIG_FEATURE_INITRD is not set
+CONFIG_HALT=y
+CONFIG_MESG=y
+
+#
+# Login/Password Management Utilities
+#
+CONFIG_FEATURE_SHADOWPASSWDS=y
+# CONFIG_USE_BB_PWD_GRP is not set
+# CONFIG_USE_BB_SHADOW is not set
+CONFIG_USE_BB_CRYPT=y
+CONFIG_ADDGROUP=y
+CONFIG_FEATURE_ADDUSER_TO_GROUP=y
+CONFIG_DELGROUP=y
+CONFIG_FEATURE_DEL_USER_FROM_GROUP=y
+CONFIG_FEATURE_CHECK_NAMES=y
+CONFIG_ADDUSER=y
+# CONFIG_FEATURE_ADDUSER_LONG_OPTIONS is not set
+CONFIG_DELUSER=y
+CONFIG_GETTY=y
+CONFIG_FEATURE_UTMP=y
+CONFIG_FEATURE_WTMP=y
+CONFIG_LOGIN=y
+# CONFIG_PAM is not set
+CONFIG_LOGIN_SCRIPTS=y
+CONFIG_FEATURE_NOLOGIN=y
+# CONFIG_FEATURE_SECURETTY is not set
+CONFIG_PASSWD=y
+CONFIG_FEATURE_PASSWD_WEAK_CHECK=y
+CONFIG_CRYPTPW=y
+CONFIG_CHPASSWD=y
+CONFIG_SU=y
+CONFIG_FEATURE_SU_SYSLOG=y
+CONFIG_FEATURE_SU_CHECKS_SHELLS=y
+CONFIG_SULOGIN=y
+CONFIG_VLOCK=y
+
+#
+# Linux Ext2 FS Progs
+#
+CONFIG_CHATTR=y
+CONFIG_FSCK=y
+CONFIG_LSATTR=y
+
+#
+# Linux Module Utilities
+#
+# CONFIG_MODPROBE_SMALL is not set
+# CONFIG_FEATURE_MODPROBE_SMALL_OPTIONS_ON_CMDLINE is not set
+# CONFIG_FEATURE_MODPROBE_SMALL_CHECK_ALREADY_LOADED is not set
+CONFIG_DEPMOD=y
+# CONFIG_FEATURE_DEPMOD_PRUNE_FANCY is not set
+CONFIG_FEATURE_DEPMOD_ALIAS=y
+CONFIG_INSMOD=y
+# CONFIG_FEATURE_INSMOD_VERSION_CHECKING is not set
+CONFIG_FEATURE_INSMOD_KSYMOOPS_SYMBOLS=y
+# CONFIG_FEATURE_INSMOD_LOADINKMEM is not set
+# CONFIG_FEATURE_INSMOD_LOAD_MAP is not set
+# CONFIG_FEATURE_INSMOD_LOAD_MAP_FULL is not set
+CONFIG_RMMOD=y
+CONFIG_LSMOD=y
+CONFIG_FEATURE_LSMOD_PRETTY_2_6_OUTPUT=y
+CONFIG_MODPROBE=y
+CONFIG_FEATURE_MODPROBE_MULTIPLE_OPTIONS=y
+CONFIG_FEATURE_MODPROBE_FANCY_ALIAS=y
+CONFIG_FEATURE_MODPROBE_BLACKLIST=y
+
+#
+# Options common to multiple modutils
+#
+CONFIG_FEATURE_CHECK_TAINTED_MODULE=y
+CONFIG_FEATURE_2_4_MODULES=y
+CONFIG_FEATURE_2_6_MODULES=y
+CONFIG_DEFAULT_MODULES_DIR="/lib/modules"
+CONFIG_DEFAULT_DEPMOD_FILE="modules.dep"
+# CONFIG_FEATURE_QUERY_MODULE_INTERFACE is not set
+
+#
+# Linux System Utilities
+#
+CONFIG_DMESG=y
+CONFIG_FEATURE_DMESG_PRETTY=y
+CONFIG_FBSET=y
+CONFIG_FEATURE_FBSET_FANCY=y
+CONFIG_FEATURE_FBSET_READMODE=y
+CONFIG_FDFLUSH=y
+CONFIG_FDFORMAT=y
+CONFIG_FDISK=y
+CONFIG_FDISK_SUPPORT_LARGE_DISKS=y
+CONFIG_FEATURE_FDISK_WRITABLE=y
+# CONFIG_FEATURE_AIX_LABEL is not set
+# CONFIG_FEATURE_SGI_LABEL is not set
+# CONFIG_FEATURE_SUN_LABEL is not set
+CONFIG_FEATURE_OSF_LABEL=y
+CONFIG_FEATURE_FDISK_ADVANCED=y
+# CONFIG_FINDFS is not set
+CONFIG_FREERAMDISK=y
+CONFIG_FSCK_MINIX=y
+CONFIG_MKFS_MINIX=y
+
+#
+# Minix filesystem support
+#
+CONFIG_FEATURE_MINIX2=y
+CONFIG_GETOPT=y
+CONFIG_HEXDUMP=y
+CONFIG_FEATURE_HEXDUMP_REVERSE=y
+CONFIG_HD=y
+CONFIG_HWCLOCK=y
+CONFIG_FEATURE_HWCLOCK_LONG_OPTIONS=y
+CONFIG_FEATURE_HWCLOCK_ADJTIME_FHS=y
+CONFIG_IPCRM=y
+CONFIG_IPCS=y
+CONFIG_LOSETUP=y
+CONFIG_MDEV=y
+CONFIG_FEATURE_MDEV_CONF=y
+CONFIG_FEATURE_MDEV_RENAME=y
+CONFIG_FEATURE_MDEV_RENAME_REGEXP=y
+CONFIG_FEATURE_MDEV_EXEC=y
+CONFIG_FEATURE_MDEV_LOAD_FIRMWARE=y
+CONFIG_MKSWAP=y
+CONFIG_FEATURE_MKSWAP_V0=y
+CONFIG_MORE=y
+CONFIG_FEATURE_USE_TERMIOS=y
+CONFIG_VOLUMEID=y
+CONFIG_FEATURE_VOLUMEID_EXT=y
+CONFIG_FEATURE_VOLUMEID_REISERFS=y
+CONFIG_FEATURE_VOLUMEID_FAT=y
+CONFIG_FEATURE_VOLUMEID_HFS=y
+CONFIG_FEATURE_VOLUMEID_JFS=y
+CONFIG_FEATURE_VOLUMEID_XFS=y
+CONFIG_FEATURE_VOLUMEID_NTFS=y
+CONFIG_FEATURE_VOLUMEID_ISO9660=y
+CONFIG_FEATURE_VOLUMEID_UDF=y
+CONFIG_FEATURE_VOLUMEID_LUKS=y
+CONFIG_FEATURE_VOLUMEID_LINUXSWAP=y
+CONFIG_FEATURE_VOLUMEID_CRAMFS=y
+CONFIG_FEATURE_VOLUMEID_ROMFS=y
+CONFIG_FEATURE_VOLUMEID_SYSV=y
+# CONFIG_FEATURE_VOLUMEID_OCFS2 is not set
+CONFIG_FEATURE_VOLUMEID_LINUXRAID=y
+CONFIG_MOUNT=y
+CONFIG_FEATURE_MOUNT_FAKE=y
+# CONFIG_FEATURE_MOUNT_VERBOSE is not set
+CONFIG_FEATURE_MOUNT_HELPERS=y
+CONFIG_FEATURE_MOUNT_LABEL=y
+CONFIG_FEATURE_MOUNT_NFS=y
+CONFIG_FEATURE_MOUNT_CIFS=y
+CONFIG_FEATURE_MOUNT_FLAGS=y
+CONFIG_FEATURE_MOUNT_FSTAB=y
+CONFIG_PIVOT_ROOT=y
+CONFIG_RDATE=y
+CONFIG_RDEV=y
+CONFIG_READPROFILE=y
+CONFIG_RTCWAKE=y
+CONFIG_SCRIPT=y
+CONFIG_SETARCH=y
+CONFIG_SWAPONOFF=y
+CONFIG_FEATURE_SWAPON_PRI=y
+CONFIG_SWITCH_ROOT=y
+CONFIG_UMOUNT=y
+CONFIG_FEATURE_UMOUNT_ALL=y
+
+#
+# Common options for mount/umount
+#
+CONFIG_FEATURE_MOUNT_LOOP=y
+CONFIG_FEATURE_MTAB_SUPPORT=y
+
+#
+# Miscellaneous Utilities
+#
+CONFIG_ADJTIMEX=y
+CONFIG_BBCONFIG=y
+CONFIG_CHAT=y
+CONFIG_FEATURE_CHAT_NOFAIL=y
+# CONFIG_FEATURE_CHAT_TTY_HIFI is not set
+CONFIG_FEATURE_CHAT_IMPLICIT_CR=y
+# CONFIG_FEATURE_CHAT_SWALLOW_OPTS is not set
+# CONFIG_FEATURE_CHAT_SEND_ESCAPES is not set
+# CONFIG_FEATURE_CHAT_VAR_ABORT_LEN is not set
+# CONFIG_FEATURE_CHAT_CLR_ABORT is not set
+CONFIG_CHRT=y
+CONFIG_CROND=y
+# CONFIG_DEBUG_CROND_OPTION is not set
+# CONFIG_FEATURE_CROND_CALL_SENDMAIL is not set
+CONFIG_CRONTAB=y
+CONFIG_DC=y
+# CONFIG_DEVFSD is not set
+# CONFIG_DEVFSD_MODLOAD is not set
+# CONFIG_DEVFSD_FG_NP is not set
+# CONFIG_DEVFSD_VERBOSE is not set
+# CONFIG_FEATURE_DEVFS is not set
+CONFIG_EJECT=y
+CONFIG_FEATURE_EJECT_SCSI=y
+CONFIG_FBSPLASH=y
+CONFIG_INOTIFYD=y
+CONFIG_LAST=y
+CONFIG_FEATURE_LAST_SMALL=y
+# CONFIG_FEATURE_LAST_FANCY is not set
+CONFIG_LESS=y
+CONFIG_FEATURE_LESS_MAXLINES=9999999
+CONFIG_FEATURE_LESS_BRACKETS=y
+CONFIG_FEATURE_LESS_FLAGS=y
+CONFIG_FEATURE_LESS_FLAGCS=y
+CONFIG_FEATURE_LESS_MARKS=y
+CONFIG_FEATURE_LESS_REGEXP=y
+CONFIG_HDPARM=y
+CONFIG_FEATURE_HDPARM_GET_IDENTITY=y
+CONFIG_FEATURE_HDPARM_HDIO_SCAN_HWIF=y
+CONFIG_FEATURE_HDPARM_HDIO_UNREGISTER_HWIF=y
+CONFIG_FEATURE_HDPARM_HDIO_DRIVE_RESET=y
+CONFIG_FEATURE_HDPARM_HDIO_TRISTATE_HWIF=y
+CONFIG_FEATURE_HDPARM_HDIO_GETSET_DMA=y
+CONFIG_MAKEDEVS=y
+# CONFIG_FEATURE_MAKEDEVS_LEAF is not set
+CONFIG_FEATURE_MAKEDEVS_TABLE=y
+# CONFIG_MAN is not set
+# CONFIG_MICROCOM is not set
+CONFIG_MOUNTPOINT=y
+CONFIG_MT=y
+CONFIG_RAIDAUTORUN=y
+CONFIG_READAHEAD=y
+CONFIG_RUNLEVEL=y
+CONFIG_RX=y
+CONFIG_SETSID=y
+CONFIG_STRINGS=y
+CONFIG_TASKSET=y
+CONFIG_FEATURE_TASKSET_FANCY=y
+CONFIG_TIME=y
+CONFIG_TTYSIZE=y
+CONFIG_WATCHDOG=y
+
+#
+# Networking Utilities
+#
+CONFIG_FEATURE_IPV6=y
+CONFIG_FEATURE_PREFER_IPV4_ADDRESS=y
+# CONFIG_VERBOSE_RESOLUTION_ERRORS is not set
+CONFIG_ARP=y
+CONFIG_ARPING=y
+CONFIG_BRCTL=y
+# CONFIG_FEATURE_BRCTL_FANCY is not set
+# CONFIG_FEATURE_BRCTL_SHOW is not set
+CONFIG_DNSD=y
+CONFIG_ETHER_WAKE=y
+CONFIG_FAKEIDENTD=y
+CONFIG_FTPGET=y
+CONFIG_FTPPUT=y
+CONFIG_FEATURE_FTPGETPUT_LONG_OPTIONS=y
+CONFIG_HOSTNAME=y
+# CONFIG_HTTPD is not set
+# CONFIG_FEATURE_HTTPD_RANGES is not set
+# CONFIG_FEATURE_HTTPD_USE_SENDFILE is not set
+# CONFIG_FEATURE_HTTPD_RELOAD_CONFIG_SIGHUP is not set
+# CONFIG_FEATURE_HTTPD_SETUID is not set
+# CONFIG_FEATURE_HTTPD_BASIC_AUTH is not set
+# CONFIG_FEATURE_HTTPD_AUTH_MD5 is not set
+# CONFIG_FEATURE_HTTPD_CONFIG_WITH_MIME_TYPES is not set
+# CONFIG_FEATURE_HTTPD_CGI is not set
+# CONFIG_FEATURE_HTTPD_CONFIG_WITH_SCRIPT_INTERPR is not set
+# CONFIG_FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV is not set
+# CONFIG_FEATURE_HTTPD_ENCODE_URL_STR is not set
+# CONFIG_FEATURE_HTTPD_ERROR_PAGES is not set
+# CONFIG_FEATURE_HTTPD_PROXY is not set
+CONFIG_IFCONFIG=y
+CONFIG_FEATURE_IFCONFIG_STATUS=y
+CONFIG_FEATURE_IFCONFIG_SLIP=y
+CONFIG_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ=y
+CONFIG_FEATURE_IFCONFIG_HW=y
+CONFIG_FEATURE_IFCONFIG_BROADCAST_PLUS=y
+CONFIG_IFENSLAVE=y
+CONFIG_IFUPDOWN=y
+CONFIG_IFUPDOWN_IFSTATE_PATH="/var/run/ifstate"
+CONFIG_FEATURE_IFUPDOWN_IP=y
+CONFIG_FEATURE_IFUPDOWN_IP_BUILTIN=y
+# CONFIG_FEATURE_IFUPDOWN_IFCONFIG_BUILTIN is not set
+CONFIG_FEATURE_IFUPDOWN_IPV4=y
+CONFIG_FEATURE_IFUPDOWN_IPV6=y
+CONFIG_FEATURE_IFUPDOWN_MAPPING=y
+CONFIG_FEATURE_IFUPDOWN_EXTERNAL_DHCP=y
+# CONFIG_INETD is not set
+# CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_ECHO is not set
+# CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DISCARD is not set
+# CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_TIME is not set
+# CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DAYTIME is not set
+# CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_CHARGEN is not set
+# CONFIG_FEATURE_INETD_RPC is not set
+CONFIG_IP=y
+CONFIG_FEATURE_IP_ADDRESS=y
+CONFIG_FEATURE_IP_LINK=y
+CONFIG_FEATURE_IP_ROUTE=y
+CONFIG_FEATURE_IP_TUNNEL=y
+CONFIG_FEATURE_IP_RULE=y
+CONFIG_FEATURE_IP_SHORT_FORMS=y
+# CONFIG_FEATURE_IP_RARE_PROTOCOLS is not set
+CONFIG_IPADDR=y
+CONFIG_IPLINK=y
+CONFIG_IPROUTE=y
+CONFIG_IPTUNNEL=y
+CONFIG_IPRULE=y
+CONFIG_IPCALC=y
+CONFIG_FEATURE_IPCALC_FANCY=y
+CONFIG_FEATURE_IPCALC_LONG_OPTIONS=y
+CONFIG_NAMEIF=y
+# CONFIG_FEATURE_NAMEIF_EXTENDED is not set
+CONFIG_NC=y
+CONFIG_NC_SERVER=y
+CONFIG_NC_EXTRA=y
+CONFIG_NETSTAT=y
+# CONFIG_FEATURE_NETSTAT_WIDE is not set
+CONFIG_FEATURE_NETSTAT_PRG=y
+CONFIG_NSLOOKUP=y
+CONFIG_PING=y
+CONFIG_PING6=y
+CONFIG_FEATURE_FANCY_PING=y
+CONFIG_PSCAN=y
+CONFIG_ROUTE=y
+# CONFIG_SENDMAIL is not set
+# CONFIG_FETCHMAIL is not set
+CONFIG_SLATTACH=y
+CONFIG_TELNET=y
+CONFIG_FEATURE_TELNET_TTYPE=y
+CONFIG_FEATURE_TELNET_AUTOLOGIN=y
+CONFIG_TELNETD=y
+CONFIG_FEATURE_TELNETD_STANDALONE=y
+CONFIG_TFTP=y
+# CONFIG_TFTPD is not set
+CONFIG_FEATURE_TFTP_GET=y
+CONFIG_FEATURE_TFTP_PUT=y
+CONFIG_FEATURE_TFTP_BLOCKSIZE=y
+# CONFIG_DEBUG_TFTP is not set
+CONFIG_TRACEROUTE=y
+# CONFIG_FEATURE_TRACEROUTE_VERBOSE is not set
+# CONFIG_FEATURE_TRACEROUTE_SOURCE_ROUTE is not set
+# CONFIG_FEATURE_TRACEROUTE_USE_ICMP is not set
+# CONFIG_APP_UDHCPD is not set
+# CONFIG_APP_DHCPRELAY is not set
+# CONFIG_APP_DUMPLEASES is not set
+# CONFIG_FEATURE_UDHCPD_WRITE_LEASES_EARLY is not set
+CONFIG_DHCPD_LEASES_FILE=""
+# CONFIG_APP_UDHCPC is not set
+# CONFIG_FEATURE_UDHCPC_ARPING is not set
+# CONFIG_FEATURE_UDHCP_PORT is not set
+# CONFIG_FEATURE_UDHCP_DEBUG is not set
+# CONFIG_FEATURE_RFC3397 is not set
+CONFIG_DHCPC_DEFAULT_SCRIPT=""
+CONFIG_UDHCPC_SLACK_FOR_BUGGY_SERVERS=
+CONFIG_VCONFIG=y
+CONFIG_WGET=y
+CONFIG_FEATURE_WGET_STATUSBAR=y
+CONFIG_FEATURE_WGET_AUTHENTICATION=y
+CONFIG_FEATURE_WGET_LONG_OPTIONS=y
+CONFIG_ZCIP=y
+CONFIG_TCPSVD=y
+CONFIG_UDPSVD=y
+
+#
+# Process Utilities
+#
+CONFIG_FREE=y
+CONFIG_FUSER=y
+CONFIG_KILL=y
+CONFIG_KILLALL=y
+CONFIG_KILLALL5=y
+CONFIG_NMETER=y
+CONFIG_PGREP=y
+CONFIG_PIDOF=y
+CONFIG_FEATURE_PIDOF_SINGLE=y
+CONFIG_FEATURE_PIDOF_OMIT=y
+CONFIG_PKILL=y
+CONFIG_PS=y
+CONFIG_FEATURE_PS_WIDE=y
+CONFIG_FEATURE_PS_TIME=y
+# CONFIG_FEATURE_PS_UNUSUAL_SYSTEMS is not set
+CONFIG_RENICE=y
+CONFIG_BB_SYSCTL=y
+CONFIG_TOP=y
+CONFIG_FEATURE_TOP_CPU_USAGE_PERCENTAGE=y
+CONFIG_FEATURE_TOP_CPU_GLOBAL_PERCENTS=y
+CONFIG_FEATURE_TOP_DECIMALS=y
+CONFIG_FEATURE_TOPMEM=y
+CONFIG_UPTIME=y
+CONFIG_WATCH=y
+
+#
+# Shells
+#
+CONFIG_FEATURE_SH_IS_ASH=y
+# CONFIG_FEATURE_SH_IS_HUSH is not set
+# CONFIG_FEATURE_SH_IS_MSH is not set
+# CONFIG_FEATURE_SH_IS_NONE is not set
+CONFIG_ASH=y
+
+#
+# Ash Shell Options
+#
+CONFIG_ASH_BASH_COMPAT=y
+CONFIG_ASH_JOB_CONTROL=y
+CONFIG_ASH_READ_NCHARS=y
+CONFIG_ASH_READ_TIMEOUT=y
+CONFIG_ASH_ALIAS=y
+CONFIG_ASH_MATH_SUPPORT=y
+CONFIG_ASH_MATH_SUPPORT_64=y
+CONFIG_ASH_GETOPTS=y
+CONFIG_ASH_BUILTIN_ECHO=y
+CONFIG_ASH_BUILTIN_PRINTF=y
+CONFIG_ASH_BUILTIN_TEST=y
+CONFIG_ASH_CMDCMD=y
+CONFIG_ASH_MAIL=y
+CONFIG_ASH_OPTIMIZE_FOR_SIZE=y
+CONFIG_ASH_RANDOM_SUPPORT=y
+CONFIG_ASH_EXPAND_PRMT=y
+# CONFIG_HUSH is not set
+# CONFIG_HUSH_HELP is not set
+# CONFIG_HUSH_INTERACTIVE is not set
+# CONFIG_HUSH_JOB is not set
+# CONFIG_HUSH_TICK is not set
+# CONFIG_HUSH_IF is not set
+# CONFIG_HUSH_LOOPS is not set
+# CONFIG_HUSH_CASE is not set
+# CONFIG_LASH is not set
+# CONFIG_MSH is not set
+
+#
+# Bourne Shell Options
+#
+CONFIG_FEATURE_SH_EXTRA_QUIET=y
+# CONFIG_FEATURE_SH_STANDALONE is not set
+# CONFIG_FEATURE_SH_NOFORK is not set
+CONFIG_CTTYHACK=y
+
+#
+# System Logging Utilities
+#
+CONFIG_SYSLOGD=y
+CONFIG_FEATURE_ROTATE_LOGFILE=y
+CONFIG_FEATURE_REMOTE_LOG=y
+# CONFIG_FEATURE_SYSLOGD_DUP is not set
+CONFIG_FEATURE_IPC_SYSLOG=y
+CONFIG_FEATURE_IPC_SYSLOG_BUFFER_SIZE=16
+CONFIG_LOGREAD=y
+CONFIG_FEATURE_LOGREAD_REDUCED_LOCKING=y
+CONFIG_KLOGD=y
+CONFIG_LOGGER=y
+
+#
+# Runit Utilities
+#
+CONFIG_RUNSV=y
+CONFIG_RUNSVDIR=y
+CONFIG_SV=y
+CONFIG_SVLOGD=y
+CONFIG_CHPST=y
+CONFIG_SETUIDGID=y
+CONFIG_ENVUIDGID=y
+CONFIG_ENVDIR=y
+CONFIG_SOFTLIMIT=y
+# CONFIG_CHCON is not set
+# CONFIG_FEATURE_CHCON_LONG_OPTIONS is not set
+# CONFIG_GETENFORCE is not set
+# CONFIG_GETSEBOOL is not set
+# CONFIG_LOAD_POLICY is not set
+# CONFIG_MATCHPATHCON is not set
+# CONFIG_RESTORECON is not set
+# CONFIG_RUNCON is not set
+# CONFIG_FEATURE_RUNCON_LONG_OPTIONS is not set
+# CONFIG_SELINUXENABLED is not set
+# CONFIG_SETENFORCE is not set
+# CONFIG_SETFILES is not set
+# CONFIG_FEATURE_SETFILES_CHECK_OPTION is not set
+# CONFIG_SETSEBOOL is not set
+# CONFIG_SESTATUS is not set
+
+#
+# Print Utilities
+#
+# CONFIG_LPD is not set
+CONFIG_LPR=y
+# CONFIG_LPQ is not set
diff --git a/source/a/mkinitrd/archive/busybox-dot-config.1.12.1 b/source/a/mkinitrd/archive/busybox-dot-config.1.12.1
new file mode 100644
index 00000000..5987e050
--- /dev/null
+++ b/source/a/mkinitrd/archive/busybox-dot-config.1.12.1
@@ -0,0 +1,857 @@
+#
+# Automatically generated make config: don't edit
+# Busybox version: 1.12.1
+# Fri Nov 7 10:20:30 2008
+#
+CONFIG_HAVE_DOT_CONFIG=y
+
+#
+# Busybox Settings
+#
+
+#
+# General Configuration
+#
+CONFIG_DESKTOP=y
+# CONFIG_EXTRA_COMPAT is not set
+# CONFIG_FEATURE_ASSUME_UNICODE is not set
+CONFIG_FEATURE_BUFFERS_USE_MALLOC=y
+# CONFIG_FEATURE_BUFFERS_GO_ON_STACK is not set
+# CONFIG_FEATURE_BUFFERS_GO_IN_BSS is not set
+CONFIG_SHOW_USAGE=y
+CONFIG_FEATURE_VERBOSE_USAGE=y
+CONFIG_FEATURE_COMPRESS_USAGE=y
+CONFIG_FEATURE_INSTALLER=y
+CONFIG_LOCALE_SUPPORT=y
+CONFIG_GETOPT_LONG=y
+CONFIG_FEATURE_DEVPTS=y
+# CONFIG_FEATURE_CLEAN_UP is not set
+CONFIG_FEATURE_PIDFILE=y
+CONFIG_FEATURE_SUID=y
+CONFIG_FEATURE_SUID_CONFIG=y
+CONFIG_FEATURE_SUID_CONFIG_QUIET=y
+# CONFIG_SELINUX is not set
+# CONFIG_FEATURE_PREFER_APPLETS is not set
+CONFIG_BUSYBOX_EXEC_PATH="/proc/self/exe"
+CONFIG_FEATURE_SYSLOG=y
+CONFIG_FEATURE_HAVE_RPC=y
+
+#
+# Build Options
+#
+CONFIG_STATIC=y
+# CONFIG_PIE is not set
+# CONFIG_NOMMU is not set
+# CONFIG_BUILD_LIBBUSYBOX is not set
+# CONFIG_FEATURE_INDIVIDUAL is not set
+# CONFIG_FEATURE_SHARED_BUSYBOX is not set
+CONFIG_LFS=y
+CONFIG_CROSS_COMPILER_PREFIX=""
+
+#
+# Debugging Options
+#
+# CONFIG_DEBUG is not set
+# CONFIG_DEBUG_PESSIMIZE is not set
+# CONFIG_WERROR is not set
+CONFIG_NO_DEBUG_LIB=y
+# CONFIG_DMALLOC is not set
+# CONFIG_EFENCE is not set
+CONFIG_INCLUDE_SUSv2=y
+# CONFIG_PARSE is not set
+
+#
+# Installation Options
+#
+CONFIG_INSTALL_NO_USR=y
+CONFIG_INSTALL_APPLET_SYMLINKS=y
+# CONFIG_INSTALL_APPLET_HARDLINKS is not set
+# CONFIG_INSTALL_APPLET_SCRIPT_WRAPPERS is not set
+# CONFIG_INSTALL_APPLET_DONT is not set
+# CONFIG_INSTALL_SH_APPLET_SYMLINK is not set
+# CONFIG_INSTALL_SH_APPLET_HARDLINK is not set
+# CONFIG_INSTALL_SH_APPLET_SCRIPT_WRAPPER is not set
+CONFIG_PREFIX="./_install"
+
+#
+# Busybox Library Tuning
+#
+CONFIG_PASSWORD_MINLEN=6
+CONFIG_MD5_SIZE_VS_SPEED=2
+# CONFIG_FEATURE_FAST_TOP is not set
+# CONFIG_FEATURE_ETC_NETWORKS is not set
+CONFIG_FEATURE_EDITING=y
+CONFIG_FEATURE_EDITING_MAX_LEN=1024
+CONFIG_FEATURE_EDITING_VI=y
+CONFIG_FEATURE_EDITING_HISTORY=64
+# CONFIG_FEATURE_EDITING_SAVEHISTORY is not set
+CONFIG_FEATURE_TAB_COMPLETION=y
+# CONFIG_FEATURE_USERNAME_COMPLETION is not set
+CONFIG_FEATURE_EDITING_FANCY_PROMPT=y
+CONFIG_FEATURE_VERBOSE_CP_MESSAGE=y
+CONFIG_FEATURE_COPYBUF_KB=4
+CONFIG_MONOTONIC_SYSCALL=y
+CONFIG_IOCTL_HEX2STR_ERROR=y
+# CONFIG_FEATURE_HWIB is not set
+
+#
+# Applets
+#
+
+#
+# Archival Utilities
+#
+# CONFIG_FEATURE_SEAMLESS_LZMA is not set
+CONFIG_FEATURE_SEAMLESS_BZ2=y
+CONFIG_FEATURE_SEAMLESS_GZ=y
+CONFIG_FEATURE_SEAMLESS_Z=y
+CONFIG_AR=y
+CONFIG_FEATURE_AR_LONG_FILENAMES=y
+CONFIG_BUNZIP2=y
+CONFIG_BZIP2=y
+CONFIG_CPIO=y
+CONFIG_FEATURE_CPIO_O=y
+# CONFIG_DPKG is not set
+# CONFIG_DPKG_DEB is not set
+# CONFIG_FEATURE_DPKG_DEB_EXTRACT_ONLY is not set
+CONFIG_GUNZIP=y
+CONFIG_GZIP=y
+CONFIG_RPM2CPIO=y
+# CONFIG_RPM is not set
+CONFIG_TAR=y
+CONFIG_FEATURE_TAR_CREATE=y
+CONFIG_FEATURE_TAR_AUTODETECT=y
+CONFIG_FEATURE_TAR_FROM=y
+CONFIG_FEATURE_TAR_OLDGNU_COMPATIBILITY=y
+# CONFIG_FEATURE_TAR_OLDSUN_COMPATIBILITY is not set
+CONFIG_FEATURE_TAR_GNU_EXTENSIONS=y
+CONFIG_FEATURE_TAR_LONG_OPTIONS=y
+CONFIG_FEATURE_TAR_UNAME_GNAME=y
+CONFIG_UNCOMPRESS=y
+CONFIG_UNLZMA=y
+CONFIG_FEATURE_LZMA_FAST=y
+CONFIG_UNZIP=y
+
+#
+# Coreutils
+#
+CONFIG_BASENAME=y
+CONFIG_CAL=y
+CONFIG_CAT=y
+CONFIG_CATV=y
+CONFIG_CHGRP=y
+CONFIG_CHMOD=y
+CONFIG_CHOWN=y
+CONFIG_CHROOT=y
+CONFIG_CKSUM=y
+CONFIG_COMM=y
+CONFIG_CP=y
+CONFIG_CUT=y
+CONFIG_DATE=y
+CONFIG_FEATURE_DATE_ISOFMT=y
+CONFIG_DD=y
+CONFIG_FEATURE_DD_SIGNAL_HANDLING=y
+CONFIG_FEATURE_DD_IBS_OBS=y
+CONFIG_DF=y
+CONFIG_FEATURE_DF_INODE=y
+CONFIG_DIRNAME=y
+CONFIG_DOS2UNIX=y
+CONFIG_UNIX2DOS=y
+CONFIG_DU=y
+CONFIG_FEATURE_DU_DEFAULT_BLOCKSIZE_1K=y
+CONFIG_ECHO=y
+CONFIG_FEATURE_FANCY_ECHO=y
+CONFIG_ENV=y
+CONFIG_FEATURE_ENV_LONG_OPTIONS=y
+CONFIG_EXPAND=y
+CONFIG_FEATURE_EXPAND_LONG_OPTIONS=y
+CONFIG_EXPR=y
+CONFIG_EXPR_MATH_SUPPORT_64=y
+CONFIG_FALSE=y
+CONFIG_FOLD=y
+CONFIG_HEAD=y
+CONFIG_FEATURE_FANCY_HEAD=y
+CONFIG_HOSTID=y
+CONFIG_ID=y
+CONFIG_INSTALL=y
+CONFIG_FEATURE_INSTALL_LONG_OPTIONS=y
+CONFIG_LENGTH=y
+CONFIG_LN=y
+CONFIG_LOGNAME=y
+CONFIG_LS=y
+CONFIG_FEATURE_LS_FILETYPES=y
+CONFIG_FEATURE_LS_FOLLOWLINKS=y
+CONFIG_FEATURE_LS_RECURSIVE=y
+CONFIG_FEATURE_LS_SORTFILES=y
+CONFIG_FEATURE_LS_TIMESTAMPS=y
+CONFIG_FEATURE_LS_USERNAME=y
+CONFIG_FEATURE_LS_COLOR=y
+CONFIG_FEATURE_LS_COLOR_IS_DEFAULT=y
+CONFIG_MD5SUM=y
+CONFIG_MKDIR=y
+CONFIG_FEATURE_MKDIR_LONG_OPTIONS=y
+CONFIG_MKFIFO=y
+CONFIG_MKNOD=y
+CONFIG_MV=y
+CONFIG_FEATURE_MV_LONG_OPTIONS=y
+CONFIG_NICE=y
+CONFIG_NOHUP=y
+CONFIG_OD=y
+CONFIG_PRINTENV=y
+CONFIG_PRINTF=y
+CONFIG_PWD=y
+CONFIG_READLINK=y
+CONFIG_FEATURE_READLINK_FOLLOW=y
+CONFIG_REALPATH=y
+CONFIG_RM=y
+CONFIG_RMDIR=y
+# CONFIG_FEATURE_RMDIR_LONG_OPTIONS is not set
+CONFIG_SEQ=y
+CONFIG_SHA1SUM=y
+CONFIG_SLEEP=y
+CONFIG_FEATURE_FANCY_SLEEP=y
+# CONFIG_FEATURE_FLOAT_SLEEP is not set
+CONFIG_SORT=y
+CONFIG_FEATURE_SORT_BIG=y
+CONFIG_SPLIT=y
+CONFIG_FEATURE_SPLIT_FANCY=y
+CONFIG_STAT=y
+CONFIG_FEATURE_STAT_FORMAT=y
+CONFIG_STTY=y
+CONFIG_SUM=y
+CONFIG_SYNC=y
+CONFIG_TAC=y
+CONFIG_TAIL=y
+CONFIG_FEATURE_FANCY_TAIL=y
+CONFIG_TEE=y
+CONFIG_FEATURE_TEE_USE_BLOCK_IO=y
+CONFIG_TEST=y
+CONFIG_FEATURE_TEST_64=y
+CONFIG_TOUCH=y
+CONFIG_TR=y
+CONFIG_FEATURE_TR_CLASSES=y
+CONFIG_FEATURE_TR_EQUIV=y
+CONFIG_TRUE=y
+CONFIG_TTY=y
+CONFIG_UNAME=y
+CONFIG_UNEXPAND=y
+CONFIG_FEATURE_UNEXPAND_LONG_OPTIONS=y
+CONFIG_UNIQ=y
+CONFIG_USLEEP=y
+CONFIG_UUDECODE=y
+CONFIG_UUENCODE=y
+CONFIG_WC=y
+CONFIG_FEATURE_WC_LARGE=y
+CONFIG_WHO=y
+CONFIG_WHOAMI=y
+CONFIG_YES=y
+
+#
+# Common options for cp and mv
+#
+CONFIG_FEATURE_PRESERVE_HARDLINKS=y
+
+#
+# Common options for ls, more and telnet
+#
+CONFIG_FEATURE_AUTOWIDTH=y
+
+#
+# Common options for df, du, ls
+#
+CONFIG_FEATURE_HUMAN_READABLE=y
+
+#
+# Common options for md5sum, sha1sum
+#
+CONFIG_FEATURE_MD5_SHA1_SUM_CHECK=y
+
+#
+# Console Utilities
+#
+CONFIG_CHVT=y
+CONFIG_CLEAR=y
+CONFIG_DEALLOCVT=y
+CONFIG_DUMPKMAP=y
+CONFIG_KBD_MODE=y
+CONFIG_LOADFONT=y
+CONFIG_LOADKMAP=y
+CONFIG_OPENVT=y
+CONFIG_RESET=y
+CONFIG_RESIZE=y
+CONFIG_FEATURE_RESIZE_PRINT=y
+CONFIG_SETCONSOLE=y
+CONFIG_FEATURE_SETCONSOLE_LONG_OPTIONS=y
+CONFIG_SETFONT=y
+CONFIG_SETKEYCODES=y
+CONFIG_SETLOGCONS=y
+CONFIG_SHOWKEY=y
+
+#
+# Debian Utilities
+#
+CONFIG_MKTEMP=y
+CONFIG_PIPE_PROGRESS=y
+CONFIG_RUN_PARTS=y
+CONFIG_FEATURE_RUN_PARTS_LONG_OPTIONS=y
+CONFIG_FEATURE_RUN_PARTS_FANCY=y
+CONFIG_START_STOP_DAEMON=y
+CONFIG_FEATURE_START_STOP_DAEMON_FANCY=y
+CONFIG_FEATURE_START_STOP_DAEMON_LONG_OPTIONS=y
+CONFIG_WHICH=y
+
+#
+# Editors
+#
+CONFIG_AWK=y
+CONFIG_FEATURE_AWK_MATH=y
+CONFIG_CMP=y
+CONFIG_DIFF=y
+CONFIG_FEATURE_DIFF_BINARY=y
+CONFIG_FEATURE_DIFF_DIR=y
+CONFIG_FEATURE_DIFF_MINIMAL=y
+CONFIG_ED=y
+CONFIG_PATCH=y
+CONFIG_SED=y
+CONFIG_VI=y
+CONFIG_FEATURE_VI_MAX_LEN=1024
+CONFIG_FEATURE_VI_8BIT=y
+CONFIG_FEATURE_VI_COLON=y
+CONFIG_FEATURE_VI_YANKMARK=y
+CONFIG_FEATURE_VI_SEARCH=y
+CONFIG_FEATURE_VI_USE_SIGNALS=y
+CONFIG_FEATURE_VI_DOT_CMD=y
+CONFIG_FEATURE_VI_READONLY=y
+CONFIG_FEATURE_VI_SETOPTS=y
+CONFIG_FEATURE_VI_SET=y
+CONFIG_FEATURE_VI_WIN_RESIZE=y
+CONFIG_FEATURE_VI_OPTIMIZE_CURSOR=y
+CONFIG_FEATURE_ALLOW_EXEC=y
+
+#
+# Finding Utilities
+#
+CONFIG_FIND=y
+CONFIG_FEATURE_FIND_PRINT0=y
+CONFIG_FEATURE_FIND_MTIME=y
+CONFIG_FEATURE_FIND_MMIN=y
+CONFIG_FEATURE_FIND_PERM=y
+CONFIG_FEATURE_FIND_TYPE=y
+CONFIG_FEATURE_FIND_XDEV=y
+CONFIG_FEATURE_FIND_MAXDEPTH=y
+CONFIG_FEATURE_FIND_NEWER=y
+CONFIG_FEATURE_FIND_INUM=y
+CONFIG_FEATURE_FIND_EXEC=y
+CONFIG_FEATURE_FIND_USER=y
+CONFIG_FEATURE_FIND_GROUP=y
+CONFIG_FEATURE_FIND_NOT=y
+CONFIG_FEATURE_FIND_DEPTH=y
+CONFIG_FEATURE_FIND_PAREN=y
+CONFIG_FEATURE_FIND_SIZE=y
+CONFIG_FEATURE_FIND_PRUNE=y
+# CONFIG_FEATURE_FIND_DELETE is not set
+CONFIG_FEATURE_FIND_PATH=y
+CONFIG_FEATURE_FIND_REGEX=y
+# CONFIG_FEATURE_FIND_CONTEXT is not set
+CONFIG_GREP=y
+CONFIG_FEATURE_GREP_EGREP_ALIAS=y
+CONFIG_FEATURE_GREP_FGREP_ALIAS=y
+CONFIG_FEATURE_GREP_CONTEXT=y
+CONFIG_XARGS=y
+CONFIG_FEATURE_XARGS_SUPPORT_CONFIRMATION=y
+CONFIG_FEATURE_XARGS_SUPPORT_QUOTES=y
+CONFIG_FEATURE_XARGS_SUPPORT_TERMOPT=y
+CONFIG_FEATURE_XARGS_SUPPORT_ZERO_TERM=y
+
+#
+# Init Utilities
+#
+CONFIG_INIT=y
+# CONFIG_DEBUG_INIT is not set
+CONFIG_FEATURE_USE_INITTAB=y
+CONFIG_FEATURE_KILL_REMOVED=y
+CONFIG_FEATURE_KILL_DELAY=10
+CONFIG_FEATURE_INIT_SCTTY=y
+CONFIG_FEATURE_INIT_SYSLOG=y
+CONFIG_FEATURE_EXTRA_QUIET=y
+# CONFIG_FEATURE_INIT_COREDUMPS is not set
+# CONFIG_FEATURE_INITRD is not set
+CONFIG_HALT=y
+CONFIG_MESG=y
+
+#
+# Login/Password Management Utilities
+#
+CONFIG_FEATURE_SHADOWPASSWDS=y
+# CONFIG_USE_BB_PWD_GRP is not set
+# CONFIG_USE_BB_SHADOW is not set
+CONFIG_USE_BB_CRYPT=y
+CONFIG_ADDGROUP=y
+CONFIG_FEATURE_ADDUSER_TO_GROUP=y
+CONFIG_DELGROUP=y
+CONFIG_FEATURE_DEL_USER_FROM_GROUP=y
+CONFIG_FEATURE_CHECK_NAMES=y
+CONFIG_ADDUSER=y
+# CONFIG_FEATURE_ADDUSER_LONG_OPTIONS is not set
+CONFIG_DELUSER=y
+CONFIG_GETTY=y
+CONFIG_FEATURE_UTMP=y
+CONFIG_FEATURE_WTMP=y
+CONFIG_LOGIN=y
+# CONFIG_PAM is not set
+CONFIG_LOGIN_SCRIPTS=y
+CONFIG_FEATURE_NOLOGIN=y
+# CONFIG_FEATURE_SECURETTY is not set
+CONFIG_PASSWD=y
+CONFIG_FEATURE_PASSWD_WEAK_CHECK=y
+CONFIG_CRYPTPW=y
+CONFIG_CHPASSWD=y
+CONFIG_SU=y
+CONFIG_FEATURE_SU_SYSLOG=y
+CONFIG_FEATURE_SU_CHECKS_SHELLS=y
+CONFIG_SULOGIN=y
+CONFIG_VLOCK=y
+
+#
+# Linux Ext2 FS Progs
+#
+CONFIG_CHATTR=y
+CONFIG_FSCK=y
+CONFIG_LSATTR=y
+
+#
+# Linux Module Utilities
+#
+# CONFIG_MODPROBE_SMALL is not set
+# CONFIG_FEATURE_MODPROBE_SMALL_OPTIONS_ON_CMDLINE is not set
+# CONFIG_FEATURE_MODPROBE_SMALL_CHECK_ALREADY_LOADED is not set
+CONFIG_DEPMOD=y
+# CONFIG_FEATURE_DEPMOD_PRUNE_FANCY is not set
+CONFIG_FEATURE_DEPMOD_ALIAS=y
+CONFIG_INSMOD=y
+# CONFIG_FEATURE_INSMOD_VERSION_CHECKING is not set
+CONFIG_FEATURE_INSMOD_KSYMOOPS_SYMBOLS=y
+# CONFIG_FEATURE_INSMOD_LOADINKMEM is not set
+# CONFIG_FEATURE_INSMOD_LOAD_MAP is not set
+# CONFIG_FEATURE_INSMOD_LOAD_MAP_FULL is not set
+CONFIG_RMMOD=y
+CONFIG_LSMOD=y
+CONFIG_FEATURE_LSMOD_PRETTY_2_6_OUTPUT=y
+CONFIG_MODPROBE=y
+CONFIG_FEATURE_MODPROBE_MULTIPLE_OPTIONS=y
+CONFIG_FEATURE_MODPROBE_FANCY_ALIAS=y
+CONFIG_FEATURE_MODPROBE_BLACKLIST=y
+
+#
+# Options common to multiple modutils
+#
+CONFIG_FEATURE_CHECK_TAINTED_MODULE=y
+CONFIG_FEATURE_2_4_MODULES=y
+CONFIG_FEATURE_2_6_MODULES=y
+CONFIG_DEFAULT_MODULES_DIR="/lib/modules"
+CONFIG_DEFAULT_DEPMOD_FILE="modules.dep"
+# CONFIG_FEATURE_QUERY_MODULE_INTERFACE is not set
+
+#
+# Linux System Utilities
+#
+CONFIG_DMESG=y
+CONFIG_FEATURE_DMESG_PRETTY=y
+CONFIG_FBSET=y
+CONFIG_FEATURE_FBSET_FANCY=y
+CONFIG_FEATURE_FBSET_READMODE=y
+CONFIG_FDFLUSH=y
+CONFIG_FDFORMAT=y
+CONFIG_FDISK=y
+CONFIG_FDISK_SUPPORT_LARGE_DISKS=y
+CONFIG_FEATURE_FDISK_WRITABLE=y
+# CONFIG_FEATURE_AIX_LABEL is not set
+# CONFIG_FEATURE_SGI_LABEL is not set
+# CONFIG_FEATURE_SUN_LABEL is not set
+CONFIG_FEATURE_OSF_LABEL=y
+CONFIG_FEATURE_FDISK_ADVANCED=y
+CONFIG_FINDFS=y
+CONFIG_FREERAMDISK=y
+CONFIG_FSCK_MINIX=y
+CONFIG_MKFS_MINIX=y
+
+#
+# Minix filesystem support
+#
+CONFIG_FEATURE_MINIX2=y
+CONFIG_GETOPT=y
+CONFIG_HEXDUMP=y
+CONFIG_FEATURE_HEXDUMP_REVERSE=y
+CONFIG_HD=y
+CONFIG_HWCLOCK=y
+CONFIG_FEATURE_HWCLOCK_LONG_OPTIONS=y
+CONFIG_FEATURE_HWCLOCK_ADJTIME_FHS=y
+CONFIG_IPCRM=y
+CONFIG_IPCS=y
+CONFIG_LOSETUP=y
+CONFIG_MDEV=y
+CONFIG_FEATURE_MDEV_CONF=y
+CONFIG_FEATURE_MDEV_RENAME=y
+CONFIG_FEATURE_MDEV_RENAME_REGEXP=y
+CONFIG_FEATURE_MDEV_EXEC=y
+CONFIG_FEATURE_MDEV_LOAD_FIRMWARE=y
+CONFIG_MKSWAP=y
+CONFIG_FEATURE_MKSWAP_V0=y
+CONFIG_MORE=y
+CONFIG_FEATURE_USE_TERMIOS=y
+CONFIG_VOLUMEID=y
+CONFIG_FEATURE_VOLUMEID_EXT=y
+CONFIG_FEATURE_VOLUMEID_REISERFS=y
+CONFIG_FEATURE_VOLUMEID_FAT=y
+CONFIG_FEATURE_VOLUMEID_HFS=y
+CONFIG_FEATURE_VOLUMEID_JFS=y
+CONFIG_FEATURE_VOLUMEID_XFS=y
+CONFIG_FEATURE_VOLUMEID_NTFS=y
+CONFIG_FEATURE_VOLUMEID_ISO9660=y
+CONFIG_FEATURE_VOLUMEID_UDF=y
+CONFIG_FEATURE_VOLUMEID_LUKS=y
+CONFIG_FEATURE_VOLUMEID_LINUXSWAP=y
+CONFIG_FEATURE_VOLUMEID_CRAMFS=y
+CONFIG_FEATURE_VOLUMEID_ROMFS=y
+CONFIG_FEATURE_VOLUMEID_SYSV=y
+# CONFIG_FEATURE_VOLUMEID_OCFS2 is not set
+CONFIG_FEATURE_VOLUMEID_LINUXRAID=y
+CONFIG_MOUNT=y
+CONFIG_FEATURE_MOUNT_FAKE=y
+# CONFIG_FEATURE_MOUNT_VERBOSE is not set
+CONFIG_FEATURE_MOUNT_HELPERS=y
+CONFIG_FEATURE_MOUNT_LABEL=y
+CONFIG_FEATURE_MOUNT_NFS=y
+CONFIG_FEATURE_MOUNT_CIFS=y
+CONFIG_FEATURE_MOUNT_FLAGS=y
+CONFIG_FEATURE_MOUNT_FSTAB=y
+CONFIG_PIVOT_ROOT=y
+CONFIG_RDATE=y
+CONFIG_RDEV=y
+CONFIG_READPROFILE=y
+CONFIG_RTCWAKE=y
+CONFIG_SCRIPT=y
+CONFIG_SETARCH=y
+CONFIG_SWAPONOFF=y
+CONFIG_FEATURE_SWAPON_PRI=y
+CONFIG_SWITCH_ROOT=y
+CONFIG_UMOUNT=y
+CONFIG_FEATURE_UMOUNT_ALL=y
+
+#
+# Common options for mount/umount
+#
+CONFIG_FEATURE_MOUNT_LOOP=y
+CONFIG_FEATURE_MTAB_SUPPORT=y
+
+#
+# Miscellaneous Utilities
+#
+CONFIG_ADJTIMEX=y
+CONFIG_BBCONFIG=y
+CONFIG_CHAT=y
+CONFIG_FEATURE_CHAT_NOFAIL=y
+# CONFIG_FEATURE_CHAT_TTY_HIFI is not set
+CONFIG_FEATURE_CHAT_IMPLICIT_CR=y
+# CONFIG_FEATURE_CHAT_SWALLOW_OPTS is not set
+# CONFIG_FEATURE_CHAT_SEND_ESCAPES is not set
+# CONFIG_FEATURE_CHAT_VAR_ABORT_LEN is not set
+# CONFIG_FEATURE_CHAT_CLR_ABORT is not set
+CONFIG_CHRT=y
+CONFIG_CROND=y
+# CONFIG_DEBUG_CROND_OPTION is not set
+# CONFIG_FEATURE_CROND_CALL_SENDMAIL is not set
+CONFIG_CRONTAB=y
+CONFIG_DC=y
+# CONFIG_DEVFSD is not set
+# CONFIG_DEVFSD_MODLOAD is not set
+# CONFIG_DEVFSD_FG_NP is not set
+# CONFIG_DEVFSD_VERBOSE is not set
+# CONFIG_FEATURE_DEVFS is not set
+CONFIG_EJECT=y
+CONFIG_FEATURE_EJECT_SCSI=y
+CONFIG_FBSPLASH=y
+CONFIG_INOTIFYD=y
+CONFIG_LAST=y
+CONFIG_FEATURE_LAST_SMALL=y
+# CONFIG_FEATURE_LAST_FANCY is not set
+CONFIG_LESS=y
+CONFIG_FEATURE_LESS_MAXLINES=9999999
+CONFIG_FEATURE_LESS_BRACKETS=y
+CONFIG_FEATURE_LESS_FLAGS=y
+CONFIG_FEATURE_LESS_FLAGCS=y
+CONFIG_FEATURE_LESS_MARKS=y
+CONFIG_FEATURE_LESS_REGEXP=y
+CONFIG_HDPARM=y
+CONFIG_FEATURE_HDPARM_GET_IDENTITY=y
+CONFIG_FEATURE_HDPARM_HDIO_SCAN_HWIF=y
+CONFIG_FEATURE_HDPARM_HDIO_UNREGISTER_HWIF=y
+CONFIG_FEATURE_HDPARM_HDIO_DRIVE_RESET=y
+CONFIG_FEATURE_HDPARM_HDIO_TRISTATE_HWIF=y
+CONFIG_FEATURE_HDPARM_HDIO_GETSET_DMA=y
+CONFIG_MAKEDEVS=y
+# CONFIG_FEATURE_MAKEDEVS_LEAF is not set
+CONFIG_FEATURE_MAKEDEVS_TABLE=y
+# CONFIG_MAN is not set
+# CONFIG_MICROCOM is not set
+CONFIG_MOUNTPOINT=y
+CONFIG_MT=y
+CONFIG_RAIDAUTORUN=y
+CONFIG_READAHEAD=y
+CONFIG_RUNLEVEL=y
+CONFIG_RX=y
+CONFIG_SETSID=y
+CONFIG_STRINGS=y
+CONFIG_TASKSET=y
+CONFIG_FEATURE_TASKSET_FANCY=y
+CONFIG_TIME=y
+CONFIG_TTYSIZE=y
+CONFIG_WATCHDOG=y
+
+#
+# Networking Utilities
+#
+CONFIG_FEATURE_IPV6=y
+CONFIG_FEATURE_PREFER_IPV4_ADDRESS=y
+# CONFIG_VERBOSE_RESOLUTION_ERRORS is not set
+CONFIG_ARP=y
+CONFIG_ARPING=y
+CONFIG_BRCTL=y
+# CONFIG_FEATURE_BRCTL_FANCY is not set
+# CONFIG_FEATURE_BRCTL_SHOW is not set
+CONFIG_DNSD=y
+CONFIG_ETHER_WAKE=y
+CONFIG_FAKEIDENTD=y
+CONFIG_FTPGET=y
+CONFIG_FTPPUT=y
+CONFIG_FEATURE_FTPGETPUT_LONG_OPTIONS=y
+CONFIG_HOSTNAME=y
+# CONFIG_HTTPD is not set
+# CONFIG_FEATURE_HTTPD_RANGES is not set
+# CONFIG_FEATURE_HTTPD_USE_SENDFILE is not set
+# CONFIG_FEATURE_HTTPD_RELOAD_CONFIG_SIGHUP is not set
+# CONFIG_FEATURE_HTTPD_SETUID is not set
+# CONFIG_FEATURE_HTTPD_BASIC_AUTH is not set
+# CONFIG_FEATURE_HTTPD_AUTH_MD5 is not set
+# CONFIG_FEATURE_HTTPD_CONFIG_WITH_MIME_TYPES is not set
+# CONFIG_FEATURE_HTTPD_CGI is not set
+# CONFIG_FEATURE_HTTPD_CONFIG_WITH_SCRIPT_INTERPR is not set
+# CONFIG_FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV is not set
+# CONFIG_FEATURE_HTTPD_ENCODE_URL_STR is not set
+# CONFIG_FEATURE_HTTPD_ERROR_PAGES is not set
+# CONFIG_FEATURE_HTTPD_PROXY is not set
+CONFIG_IFCONFIG=y
+CONFIG_FEATURE_IFCONFIG_STATUS=y
+CONFIG_FEATURE_IFCONFIG_SLIP=y
+CONFIG_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ=y
+CONFIG_FEATURE_IFCONFIG_HW=y
+CONFIG_FEATURE_IFCONFIG_BROADCAST_PLUS=y
+CONFIG_IFENSLAVE=y
+CONFIG_IFUPDOWN=y
+CONFIG_IFUPDOWN_IFSTATE_PATH="/var/run/ifstate"
+CONFIG_FEATURE_IFUPDOWN_IP=y
+CONFIG_FEATURE_IFUPDOWN_IP_BUILTIN=y
+# CONFIG_FEATURE_IFUPDOWN_IFCONFIG_BUILTIN is not set
+CONFIG_FEATURE_IFUPDOWN_IPV4=y
+CONFIG_FEATURE_IFUPDOWN_IPV6=y
+CONFIG_FEATURE_IFUPDOWN_MAPPING=y
+CONFIG_FEATURE_IFUPDOWN_EXTERNAL_DHCP=y
+# CONFIG_INETD is not set
+# CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_ECHO is not set
+# CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DISCARD is not set
+# CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_TIME is not set
+# CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DAYTIME is not set
+# CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_CHARGEN is not set
+# CONFIG_FEATURE_INETD_RPC is not set
+CONFIG_IP=y
+CONFIG_FEATURE_IP_ADDRESS=y
+CONFIG_FEATURE_IP_LINK=y
+CONFIG_FEATURE_IP_ROUTE=y
+CONFIG_FEATURE_IP_TUNNEL=y
+CONFIG_FEATURE_IP_RULE=y
+CONFIG_FEATURE_IP_SHORT_FORMS=y
+# CONFIG_FEATURE_IP_RARE_PROTOCOLS is not set
+CONFIG_IPADDR=y
+CONFIG_IPLINK=y
+CONFIG_IPROUTE=y
+CONFIG_IPTUNNEL=y
+CONFIG_IPRULE=y
+CONFIG_IPCALC=y
+CONFIG_FEATURE_IPCALC_FANCY=y
+CONFIG_FEATURE_IPCALC_LONG_OPTIONS=y
+CONFIG_NAMEIF=y
+# CONFIG_FEATURE_NAMEIF_EXTENDED is not set
+CONFIG_NC=y
+CONFIG_NC_SERVER=y
+CONFIG_NC_EXTRA=y
+CONFIG_NETSTAT=y
+# CONFIG_FEATURE_NETSTAT_WIDE is not set
+CONFIG_FEATURE_NETSTAT_PRG=y
+CONFIG_NSLOOKUP=y
+CONFIG_PING=y
+CONFIG_PING6=y
+CONFIG_FEATURE_FANCY_PING=y
+CONFIG_PSCAN=y
+CONFIG_ROUTE=y
+# CONFIG_SENDMAIL is not set
+# CONFIG_FETCHMAIL is not set
+CONFIG_SLATTACH=y
+CONFIG_TELNET=y
+CONFIG_FEATURE_TELNET_TTYPE=y
+CONFIG_FEATURE_TELNET_AUTOLOGIN=y
+CONFIG_TELNETD=y
+CONFIG_FEATURE_TELNETD_STANDALONE=y
+CONFIG_TFTP=y
+# CONFIG_TFTPD is not set
+CONFIG_FEATURE_TFTP_GET=y
+CONFIG_FEATURE_TFTP_PUT=y
+CONFIG_FEATURE_TFTP_BLOCKSIZE=y
+# CONFIG_DEBUG_TFTP is not set
+CONFIG_TRACEROUTE=y
+# CONFIG_FEATURE_TRACEROUTE_VERBOSE is not set
+# CONFIG_FEATURE_TRACEROUTE_SOURCE_ROUTE is not set
+# CONFIG_FEATURE_TRACEROUTE_USE_ICMP is not set
+# CONFIG_APP_UDHCPD is not set
+# CONFIG_APP_DHCPRELAY is not set
+# CONFIG_APP_DUMPLEASES is not set
+# CONFIG_FEATURE_UDHCPD_WRITE_LEASES_EARLY is not set
+CONFIG_DHCPD_LEASES_FILE=""
+# CONFIG_APP_UDHCPC is not set
+# CONFIG_FEATURE_UDHCPC_ARPING is not set
+# CONFIG_FEATURE_UDHCP_PORT is not set
+# CONFIG_FEATURE_UDHCP_DEBUG is not set
+# CONFIG_FEATURE_RFC3397 is not set
+CONFIG_DHCPC_DEFAULT_SCRIPT=""
+CONFIG_UDHCPC_SLACK_FOR_BUGGY_SERVERS=
+CONFIG_VCONFIG=y
+CONFIG_WGET=y
+CONFIG_FEATURE_WGET_STATUSBAR=y
+CONFIG_FEATURE_WGET_AUTHENTICATION=y
+CONFIG_FEATURE_WGET_LONG_OPTIONS=y
+CONFIG_ZCIP=y
+CONFIG_TCPSVD=y
+CONFIG_UDPSVD=y
+
+#
+# Process Utilities
+#
+CONFIG_FREE=y
+CONFIG_FUSER=y
+CONFIG_KILL=y
+CONFIG_KILLALL=y
+CONFIG_KILLALL5=y
+CONFIG_NMETER=y
+CONFIG_PGREP=y
+CONFIG_PIDOF=y
+CONFIG_FEATURE_PIDOF_SINGLE=y
+CONFIG_FEATURE_PIDOF_OMIT=y
+CONFIG_PKILL=y
+CONFIG_PS=y
+CONFIG_FEATURE_PS_WIDE=y
+CONFIG_FEATURE_PS_TIME=y
+# CONFIG_FEATURE_PS_UNUSUAL_SYSTEMS is not set
+CONFIG_RENICE=y
+CONFIG_BB_SYSCTL=y
+CONFIG_TOP=y
+CONFIG_FEATURE_TOP_CPU_USAGE_PERCENTAGE=y
+CONFIG_FEATURE_TOP_CPU_GLOBAL_PERCENTS=y
+CONFIG_FEATURE_TOP_DECIMALS=y
+CONFIG_FEATURE_TOPMEM=y
+CONFIG_UPTIME=y
+CONFIG_WATCH=y
+
+#
+# Shells
+#
+CONFIG_FEATURE_SH_IS_ASH=y
+# CONFIG_FEATURE_SH_IS_HUSH is not set
+# CONFIG_FEATURE_SH_IS_MSH is not set
+# CONFIG_FEATURE_SH_IS_NONE is not set
+CONFIG_ASH=y
+
+#
+# Ash Shell Options
+#
+CONFIG_ASH_BASH_COMPAT=y
+CONFIG_ASH_JOB_CONTROL=y
+CONFIG_ASH_READ_NCHARS=y
+CONFIG_ASH_READ_TIMEOUT=y
+CONFIG_ASH_ALIAS=y
+CONFIG_ASH_MATH_SUPPORT=y
+CONFIG_ASH_MATH_SUPPORT_64=y
+CONFIG_ASH_GETOPTS=y
+CONFIG_ASH_BUILTIN_ECHO=y
+CONFIG_ASH_BUILTIN_PRINTF=y
+CONFIG_ASH_BUILTIN_TEST=y
+CONFIG_ASH_CMDCMD=y
+CONFIG_ASH_MAIL=y
+CONFIG_ASH_OPTIMIZE_FOR_SIZE=y
+CONFIG_ASH_RANDOM_SUPPORT=y
+CONFIG_ASH_EXPAND_PRMT=y
+# CONFIG_HUSH is not set
+# CONFIG_HUSH_HELP is not set
+# CONFIG_HUSH_INTERACTIVE is not set
+# CONFIG_HUSH_JOB is not set
+# CONFIG_HUSH_TICK is not set
+# CONFIG_HUSH_IF is not set
+# CONFIG_HUSH_LOOPS is not set
+# CONFIG_HUSH_CASE is not set
+# CONFIG_LASH is not set
+# CONFIG_MSH is not set
+
+#
+# Bourne Shell Options
+#
+CONFIG_FEATURE_SH_EXTRA_QUIET=y
+# CONFIG_FEATURE_SH_STANDALONE is not set
+# CONFIG_FEATURE_SH_NOFORK is not set
+CONFIG_CTTYHACK=y
+
+#
+# System Logging Utilities
+#
+CONFIG_SYSLOGD=y
+CONFIG_FEATURE_ROTATE_LOGFILE=y
+CONFIG_FEATURE_REMOTE_LOG=y
+# CONFIG_FEATURE_SYSLOGD_DUP is not set
+CONFIG_FEATURE_IPC_SYSLOG=y
+CONFIG_FEATURE_IPC_SYSLOG_BUFFER_SIZE=16
+CONFIG_LOGREAD=y
+CONFIG_FEATURE_LOGREAD_REDUCED_LOCKING=y
+CONFIG_KLOGD=y
+CONFIG_LOGGER=y
+
+#
+# Runit Utilities
+#
+CONFIG_RUNSV=y
+CONFIG_RUNSVDIR=y
+CONFIG_SV=y
+CONFIG_SVLOGD=y
+CONFIG_CHPST=y
+CONFIG_SETUIDGID=y
+CONFIG_ENVUIDGID=y
+CONFIG_ENVDIR=y
+CONFIG_SOFTLIMIT=y
+# CONFIG_CHCON is not set
+# CONFIG_FEATURE_CHCON_LONG_OPTIONS is not set
+# CONFIG_GETENFORCE is not set
+# CONFIG_GETSEBOOL is not set
+# CONFIG_LOAD_POLICY is not set
+# CONFIG_MATCHPATHCON is not set
+# CONFIG_RESTORECON is not set
+# CONFIG_RUNCON is not set
+# CONFIG_FEATURE_RUNCON_LONG_OPTIONS is not set
+# CONFIG_SELINUXENABLED is not set
+# CONFIG_SETENFORCE is not set
+# CONFIG_SETFILES is not set
+# CONFIG_FEATURE_SETFILES_CHECK_OPTION is not set
+# CONFIG_SETSEBOOL is not set
+# CONFIG_SESTATUS is not set
+
+#
+# Print Utilities
+#
+# CONFIG_LPD is not set
+CONFIG_LPR=y
+# CONFIG_LPQ is not set
diff --git a/source/a/mkinitrd/archive/busybox-dot-config.1.7.2 b/source/a/mkinitrd/archive/busybox-dot-config.1.7.2
new file mode 100644
index 00000000..5b9c00b4
--- /dev/null
+++ b/source/a/mkinitrd/archive/busybox-dot-config.1.7.2
@@ -0,0 +1,753 @@
+#
+# Automatically generated make config: don't edit
+# Busybox version: 1.7.2
+# Thu Oct 4 22:03:29 2007
+#
+CONFIG_HAVE_DOT_CONFIG=y
+
+#
+# Busybox Settings
+#
+
+#
+# General Configuration
+#
+CONFIG_NITPICK=y
+CONFIG_DESKTOP=y
+CONFIG_FEATURE_BUFFERS_USE_MALLOC=y
+# CONFIG_FEATURE_BUFFERS_GO_ON_STACK is not set
+# CONFIG_FEATURE_BUFFERS_GO_IN_BSS is not set
+CONFIG_SHOW_USAGE=y
+CONFIG_FEATURE_VERBOSE_USAGE=y
+CONFIG_FEATURE_COMPRESS_USAGE=y
+CONFIG_FEATURE_INSTALLER=y
+CONFIG_LOCALE_SUPPORT=y
+CONFIG_GETOPT_LONG=y
+CONFIG_FEATURE_DEVPTS=y
+# CONFIG_FEATURE_CLEAN_UP is not set
+CONFIG_FEATURE_PIDFILE=y
+CONFIG_FEATURE_SUID=y
+CONFIG_FEATURE_SUID_CONFIG=y
+CONFIG_FEATURE_SUID_CONFIG_QUIET=y
+# CONFIG_SELINUX is not set
+# CONFIG_FEATURE_PREFER_APPLETS is not set
+CONFIG_BUSYBOX_EXEC_PATH="/proc/self/exe"
+CONFIG_FEATURE_SYSLOG=y
+CONFIG_FEATURE_HAVE_RPC=y
+
+#
+# Build Options
+#
+CONFIG_STATIC=y
+# CONFIG_BUILD_LIBBUSYBOX is not set
+# CONFIG_FEATURE_FULL_LIBBUSYBOX is not set
+# CONFIG_FEATURE_SHARED_BUSYBOX is not set
+CONFIG_LFS=y
+CONFIG_BUILD_AT_ONCE=y
+
+#
+# Debugging Options
+#
+# CONFIG_DEBUG is not set
+# CONFIG_WERROR is not set
+CONFIG_NO_DEBUG_LIB=y
+# CONFIG_DMALLOC is not set
+# CONFIG_EFENCE is not set
+CONFIG_INCLUDE_SUSv2=y
+
+#
+# Installation Options
+#
+CONFIG_INSTALL_NO_USR=y
+CONFIG_INSTALL_APPLET_SYMLINKS=y
+# CONFIG_INSTALL_APPLET_HARDLINKS is not set
+# CONFIG_INSTALL_APPLET_DONT is not set
+CONFIG_PREFIX="./_install"
+
+#
+# Busybox Library Tuning
+#
+CONFIG_PASSWORD_MINLEN=6
+CONFIG_MD5_SIZE_VS_SPEED=2
+# CONFIG_FEATURE_FAST_TOP is not set
+# CONFIG_FEATURE_ETC_NETWORKS is not set
+CONFIG_FEATURE_EDITING=y
+CONFIG_FEATURE_EDITING_MAX_LEN=1024
+CONFIG_FEATURE_EDITING_FANCY_KEYS=y
+CONFIG_FEATURE_EDITING_VI=y
+CONFIG_FEATURE_EDITING_HISTORY=64
+# CONFIG_FEATURE_EDITING_SAVEHISTORY is not set
+CONFIG_FEATURE_TAB_COMPLETION=y
+# CONFIG_FEATURE_USERNAME_COMPLETION is not set
+CONFIG_FEATURE_EDITING_FANCY_PROMPT=y
+CONFIG_MONOTONIC_SYSCALL=y
+CONFIG_IOCTL_HEX2STR_ERROR=y
+
+#
+# Applets
+#
+
+#
+# Archival Utilities
+#
+CONFIG_AR=y
+CONFIG_FEATURE_AR_LONG_FILENAMES=y
+CONFIG_BUNZIP2=y
+CONFIG_CPIO=y
+# CONFIG_DPKG is not set
+# CONFIG_DPKG_DEB is not set
+# CONFIG_FEATURE_DPKG_DEB_EXTRACT_ONLY is not set
+CONFIG_GUNZIP=y
+CONFIG_FEATURE_GUNZIP_UNCOMPRESS=y
+CONFIG_GZIP=y
+CONFIG_RPM2CPIO=y
+# CONFIG_RPM is not set
+# CONFIG_FEATURE_RPM_BZ2 is not set
+CONFIG_TAR=y
+CONFIG_FEATURE_TAR_CREATE=y
+CONFIG_FEATURE_TAR_BZIP2=y
+CONFIG_FEATURE_TAR_LZMA=y
+CONFIG_FEATURE_TAR_FROM=y
+CONFIG_FEATURE_TAR_GZIP=y
+CONFIG_FEATURE_TAR_COMPRESS=y
+CONFIG_FEATURE_TAR_OLDGNU_COMPATIBILITY=y
+# CONFIG_FEATURE_TAR_OLDSUN_COMPATIBILITY is not set
+CONFIG_FEATURE_TAR_GNU_EXTENSIONS=y
+CONFIG_FEATURE_TAR_LONG_OPTIONS=y
+CONFIG_UNCOMPRESS=y
+CONFIG_UNLZMA=y
+CONFIG_FEATURE_LZMA_FAST=y
+CONFIG_UNZIP=y
+
+#
+# Common options for cpio and tar
+#
+CONFIG_FEATURE_UNARCHIVE_TAPE=y
+# CONFIG_FEATURE_DEB_TAR_GZ is not set
+# CONFIG_FEATURE_DEB_TAR_BZ2 is not set
+# CONFIG_FEATURE_DEB_TAR_LZMA is not set
+
+#
+# Coreutils
+#
+CONFIG_BASENAME=y
+CONFIG_CAL=y
+CONFIG_CAT=y
+CONFIG_CATV=y
+CONFIG_CHGRP=y
+CONFIG_CHMOD=y
+CONFIG_CHOWN=y
+CONFIG_CHROOT=y
+CONFIG_CKSUM=y
+CONFIG_COMM=y
+CONFIG_CP=y
+CONFIG_CUT=y
+CONFIG_DATE=y
+CONFIG_FEATURE_DATE_ISOFMT=y
+CONFIG_DD=y
+CONFIG_FEATURE_DD_SIGNAL_HANDLING=y
+CONFIG_FEATURE_DD_IBS_OBS=y
+CONFIG_DF=y
+CONFIG_DIRNAME=y
+CONFIG_DOS2UNIX=y
+CONFIG_UNIX2DOS=y
+CONFIG_DU=y
+CONFIG_FEATURE_DU_DEFAULT_BLOCKSIZE_1K=y
+CONFIG_ECHO=y
+CONFIG_FEATURE_FANCY_ECHO=y
+CONFIG_ENV=y
+CONFIG_FEATURE_ENV_LONG_OPTIONS=y
+CONFIG_EXPAND=y
+CONFIG_FEATURE_EXPAND_LONG_OPTIONS=y
+CONFIG_EXPR=y
+CONFIG_EXPR_MATH_SUPPORT_64=y
+CONFIG_FALSE=y
+CONFIG_FOLD=y
+CONFIG_HEAD=y
+CONFIG_FEATURE_FANCY_HEAD=y
+CONFIG_HOSTID=y
+CONFIG_ID=y
+CONFIG_INSTALL=y
+CONFIG_FEATURE_INSTALL_LONG_OPTIONS=y
+CONFIG_LENGTH=y
+CONFIG_LN=y
+CONFIG_LOGNAME=y
+CONFIG_LS=y
+CONFIG_FEATURE_LS_FILETYPES=y
+CONFIG_FEATURE_LS_FOLLOWLINKS=y
+CONFIG_FEATURE_LS_RECURSIVE=y
+CONFIG_FEATURE_LS_SORTFILES=y
+CONFIG_FEATURE_LS_TIMESTAMPS=y
+CONFIG_FEATURE_LS_USERNAME=y
+CONFIG_FEATURE_LS_COLOR=y
+CONFIG_FEATURE_LS_COLOR_IS_DEFAULT=y
+CONFIG_MD5SUM=y
+CONFIG_MKDIR=y
+CONFIG_FEATURE_MKDIR_LONG_OPTIONS=y
+CONFIG_MKFIFO=y
+CONFIG_MKNOD=y
+CONFIG_MV=y
+CONFIG_FEATURE_MV_LONG_OPTIONS=y
+CONFIG_NICE=y
+CONFIG_NOHUP=y
+CONFIG_OD=y
+CONFIG_PRINTENV=y
+CONFIG_PRINTF=y
+CONFIG_PWD=y
+CONFIG_READLINK=y
+CONFIG_FEATURE_READLINK_FOLLOW=y
+CONFIG_REALPATH=y
+CONFIG_RM=y
+CONFIG_RMDIR=y
+CONFIG_SEQ=y
+CONFIG_SHA1SUM=y
+CONFIG_SLEEP=y
+CONFIG_FEATURE_FANCY_SLEEP=y
+CONFIG_SORT=y
+CONFIG_FEATURE_SORT_BIG=y
+CONFIG_SPLIT=y
+CONFIG_FEATURE_SPLIT_FANCY=y
+CONFIG_STAT=y
+CONFIG_FEATURE_STAT_FORMAT=y
+CONFIG_STTY=y
+CONFIG_SUM=y
+CONFIG_SYNC=y
+CONFIG_TAIL=y
+CONFIG_FEATURE_FANCY_TAIL=y
+CONFIG_TEE=y
+CONFIG_FEATURE_TEE_USE_BLOCK_IO=y
+CONFIG_TEST=y
+CONFIG_FEATURE_TEST_64=y
+CONFIG_TOUCH=y
+CONFIG_TR=y
+CONFIG_FEATURE_TR_CLASSES=y
+CONFIG_FEATURE_TR_EQUIV=y
+CONFIG_TRUE=y
+CONFIG_TTY=y
+CONFIG_UNAME=y
+CONFIG_UNEXPAND=y
+CONFIG_FEATURE_UNEXPAND_LONG_OPTIONS=y
+CONFIG_UNIQ=y
+CONFIG_USLEEP=y
+CONFIG_UUDECODE=y
+CONFIG_UUENCODE=y
+CONFIG_WC=y
+CONFIG_FEATURE_WC_LARGE=y
+CONFIG_WHO=y
+CONFIG_WHOAMI=y
+CONFIG_YES=y
+
+#
+# Common options for cp and mv
+#
+CONFIG_FEATURE_PRESERVE_HARDLINKS=y
+
+#
+# Common options for ls, more and telnet
+#
+CONFIG_FEATURE_AUTOWIDTH=y
+
+#
+# Common options for df, du, ls
+#
+CONFIG_FEATURE_HUMAN_READABLE=y
+
+#
+# Common options for md5sum, sha1sum
+#
+CONFIG_FEATURE_MD5_SHA1_SUM_CHECK=y
+
+#
+# Console Utilities
+#
+CONFIG_CHVT=y
+CONFIG_CLEAR=y
+CONFIG_DEALLOCVT=y
+CONFIG_DUMPKMAP=y
+CONFIG_LOADFONT=y
+CONFIG_LOADKMAP=y
+CONFIG_OPENVT=y
+CONFIG_RESET=y
+CONFIG_RESIZE=y
+CONFIG_FEATURE_RESIZE_PRINT=y
+CONFIG_SETCONSOLE=y
+CONFIG_FEATURE_SETCONSOLE_LONG_OPTIONS=y
+CONFIG_SETKEYCODES=y
+CONFIG_SETLOGCONS=y
+
+#
+# Debian Utilities
+#
+CONFIG_MKTEMP=y
+CONFIG_PIPE_PROGRESS=y
+CONFIG_RUN_PARTS=y
+CONFIG_FEATURE_RUN_PARTS_LONG_OPTIONS=y
+CONFIG_FEATURE_RUN_PARTS_FANCY=y
+CONFIG_START_STOP_DAEMON=y
+CONFIG_FEATURE_START_STOP_DAEMON_FANCY=y
+CONFIG_FEATURE_START_STOP_DAEMON_LONG_OPTIONS=y
+CONFIG_WHICH=y
+
+#
+# Editors
+#
+CONFIG_AWK=y
+CONFIG_FEATURE_AWK_MATH=y
+CONFIG_CMP=y
+CONFIG_DIFF=y
+CONFIG_FEATURE_DIFF_BINARY=y
+CONFIG_FEATURE_DIFF_DIR=y
+CONFIG_FEATURE_DIFF_MINIMAL=y
+CONFIG_ED=y
+CONFIG_PATCH=y
+CONFIG_SED=y
+CONFIG_VI=y
+CONFIG_FEATURE_VI_MAX_LEN=1024
+CONFIG_FEATURE_VI_COLON=y
+CONFIG_FEATURE_VI_YANKMARK=y
+CONFIG_FEATURE_VI_SEARCH=y
+CONFIG_FEATURE_VI_USE_SIGNALS=y
+CONFIG_FEATURE_VI_DOT_CMD=y
+CONFIG_FEATURE_VI_READONLY=y
+CONFIG_FEATURE_VI_SETOPTS=y
+CONFIG_FEATURE_VI_SET=y
+CONFIG_FEATURE_VI_WIN_RESIZE=y
+CONFIG_FEATURE_VI_OPTIMIZE_CURSOR=y
+CONFIG_FEATURE_ALLOW_EXEC=y
+
+#
+# Finding Utilities
+#
+CONFIG_FIND=y
+CONFIG_FEATURE_FIND_PRINT0=y
+CONFIG_FEATURE_FIND_MTIME=y
+CONFIG_FEATURE_FIND_MMIN=y
+CONFIG_FEATURE_FIND_PERM=y
+CONFIG_FEATURE_FIND_TYPE=y
+CONFIG_FEATURE_FIND_XDEV=y
+CONFIG_FEATURE_FIND_MAXDEPTH=y
+CONFIG_FEATURE_FIND_NEWER=y
+CONFIG_FEATURE_FIND_INUM=y
+CONFIG_FEATURE_FIND_EXEC=y
+CONFIG_FEATURE_FIND_USER=y
+CONFIG_FEATURE_FIND_GROUP=y
+CONFIG_FEATURE_FIND_NOT=y
+CONFIG_FEATURE_FIND_DEPTH=y
+CONFIG_FEATURE_FIND_PAREN=y
+CONFIG_FEATURE_FIND_SIZE=y
+CONFIG_FEATURE_FIND_PRUNE=y
+# CONFIG_FEATURE_FIND_DELETE is not set
+CONFIG_FEATURE_FIND_PATH=y
+CONFIG_FEATURE_FIND_REGEX=y
+# CONFIG_FEATURE_FIND_CONTEXT is not set
+CONFIG_GREP=y
+CONFIG_FEATURE_GREP_EGREP_ALIAS=y
+CONFIG_FEATURE_GREP_FGREP_ALIAS=y
+CONFIG_FEATURE_GREP_CONTEXT=y
+CONFIG_XARGS=y
+CONFIG_FEATURE_XARGS_SUPPORT_CONFIRMATION=y
+CONFIG_FEATURE_XARGS_SUPPORT_QUOTES=y
+CONFIG_FEATURE_XARGS_SUPPORT_TERMOPT=y
+CONFIG_FEATURE_XARGS_SUPPORT_ZERO_TERM=y
+
+#
+# Init Utilities
+#
+CONFIG_INIT=y
+# CONFIG_DEBUG_INIT is not set
+CONFIG_FEATURE_USE_INITTAB=y
+CONFIG_FEATURE_INIT_SCTTY=y
+CONFIG_FEATURE_INIT_SYSLOG=y
+CONFIG_FEATURE_EXTRA_QUIET=y
+# CONFIG_FEATURE_INIT_COREDUMPS is not set
+# CONFIG_FEATURE_INITRD is not set
+CONFIG_HALT=y
+CONFIG_MESG=y
+
+#
+# Login/Password Management Utilities
+#
+CONFIG_FEATURE_SHADOWPASSWDS=y
+# CONFIG_USE_BB_SHADOW is not set
+# CONFIG_USE_BB_PWD_GRP is not set
+CONFIG_ADDGROUP=y
+CONFIG_FEATURE_ADDUSER_TO_GROUP=y
+CONFIG_DELGROUP=y
+CONFIG_FEATURE_DEL_USER_FROM_GROUP=y
+CONFIG_ADDUSER=y
+CONFIG_DELUSER=y
+CONFIG_GETTY=y
+CONFIG_FEATURE_UTMP=y
+CONFIG_FEATURE_WTMP=y
+CONFIG_LOGIN=y
+# CONFIG_PAM is not set
+CONFIG_LOGIN_SCRIPTS=y
+CONFIG_FEATURE_NOLOGIN=y
+# CONFIG_FEATURE_SECURETTY is not set
+CONFIG_PASSWD=y
+CONFIG_FEATURE_PASSWD_WEAK_CHECK=y
+CONFIG_CRYPTPW=y
+CONFIG_CHPASSWD=y
+CONFIG_SU=y
+CONFIG_FEATURE_SU_SYSLOG=y
+CONFIG_FEATURE_SU_CHECKS_SHELLS=y
+CONFIG_SULOGIN=y
+CONFIG_VLOCK=y
+
+#
+# Linux Ext2 FS Progs
+#
+CONFIG_CHATTR=y
+CONFIG_FSCK=y
+CONFIG_LSATTR=y
+
+#
+# Linux Module Utilities
+#
+CONFIG_INSMOD=y
+# CONFIG_FEATURE_INSMOD_VERSION_CHECKING is not set
+CONFIG_FEATURE_INSMOD_KSYMOOPS_SYMBOLS=y
+# CONFIG_FEATURE_INSMOD_LOADINKMEM is not set
+# CONFIG_FEATURE_INSMOD_LOAD_MAP is not set
+# CONFIG_FEATURE_INSMOD_LOAD_MAP_FULL is not set
+CONFIG_RMMOD=y
+CONFIG_LSMOD=y
+CONFIG_FEATURE_LSMOD_PRETTY_2_6_OUTPUT=y
+CONFIG_MODPROBE=y
+CONFIG_FEATURE_MODPROBE_MULTIPLE_OPTIONS=y
+CONFIG_FEATURE_MODPROBE_FANCY_ALIAS=y
+
+#
+# Options common to multiple modutils
+#
+CONFIG_FEATURE_CHECK_TAINTED_MODULE=y
+CONFIG_FEATURE_2_4_MODULES=y
+CONFIG_FEATURE_2_6_MODULES=y
+# CONFIG_FEATURE_QUERY_MODULE_INTERFACE is not set
+
+#
+# Linux System Utilities
+#
+CONFIG_DMESG=y
+CONFIG_FEATURE_DMESG_PRETTY=y
+CONFIG_FBSET=y
+CONFIG_FEATURE_FBSET_FANCY=y
+CONFIG_FEATURE_FBSET_READMODE=y
+CONFIG_FDFLUSH=y
+CONFIG_FDFORMAT=y
+CONFIG_FDISK=y
+CONFIG_FDISK_SUPPORT_LARGE_DISKS=y
+CONFIG_FEATURE_FDISK_WRITABLE=y
+# CONFIG_FEATURE_AIX_LABEL is not set
+# CONFIG_FEATURE_SGI_LABEL is not set
+# CONFIG_FEATURE_SUN_LABEL is not set
+CONFIG_FEATURE_OSF_LABEL=y
+CONFIG_FEATURE_FDISK_ADVANCED=y
+CONFIG_FREERAMDISK=y
+CONFIG_FSCK_MINIX=y
+CONFIG_MKFS_MINIX=y
+
+#
+# Minix filesystem support
+#
+CONFIG_FEATURE_MINIX2=y
+CONFIG_GETOPT=y
+CONFIG_HEXDUMP=y
+CONFIG_HWCLOCK=y
+CONFIG_FEATURE_HWCLOCK_LONG_OPTIONS=y
+CONFIG_FEATURE_HWCLOCK_ADJTIME_FHS=y
+CONFIG_IPCRM=y
+CONFIG_IPCS=y
+CONFIG_LOSETUP=y
+CONFIG_MDEV=y
+CONFIG_FEATURE_MDEV_CONF=y
+CONFIG_FEATURE_MDEV_EXEC=y
+CONFIG_FEATURE_MDEV_LOAD_FIRMWARE=y
+CONFIG_MKSWAP=y
+CONFIG_FEATURE_MKSWAP_V0=y
+CONFIG_MORE=y
+CONFIG_FEATURE_USE_TERMIOS=y
+CONFIG_MOUNT=y
+CONFIG_FEATURE_MOUNT_NFS=y
+CONFIG_FEATURE_MOUNT_CIFS=y
+CONFIG_FEATURE_MOUNT_FLAGS=y
+CONFIG_FEATURE_MOUNT_FSTAB=y
+CONFIG_PIVOT_ROOT=y
+CONFIG_RDATE=y
+CONFIG_READPROFILE=y
+CONFIG_SETARCH=y
+CONFIG_SWAPONOFF=y
+CONFIG_SWITCH_ROOT=y
+CONFIG_UMOUNT=y
+CONFIG_FEATURE_UMOUNT_ALL=y
+
+#
+# Common options for mount/umount
+#
+CONFIG_FEATURE_MOUNT_LOOP=y
+CONFIG_FEATURE_MTAB_SUPPORT=y
+
+#
+# Miscellaneous Utilities
+#
+CONFIG_ADJTIMEX=y
+CONFIG_BBCONFIG=y
+CONFIG_CHRT=y
+CONFIG_CROND=y
+# CONFIG_DEBUG_CROND_OPTION is not set
+# CONFIG_FEATURE_CROND_CALL_SENDMAIL is not set
+CONFIG_CRONTAB=y
+CONFIG_DC=y
+# CONFIG_DEVFSD is not set
+# CONFIG_DEVFSD_MODLOAD is not set
+# CONFIG_DEVFSD_FG_NP is not set
+# CONFIG_DEVFSD_VERBOSE is not set
+# CONFIG_FEATURE_DEVFS is not set
+CONFIG_EJECT=y
+CONFIG_LAST=y
+CONFIG_LESS=y
+CONFIG_FEATURE_LESS_MAXLINES=9999999
+CONFIG_FEATURE_LESS_BRACKETS=y
+CONFIG_FEATURE_LESS_FLAGS=y
+CONFIG_FEATURE_LESS_FLAGCS=y
+CONFIG_FEATURE_LESS_MARKS=y
+CONFIG_FEATURE_LESS_REGEXP=y
+CONFIG_HDPARM=y
+CONFIG_FEATURE_HDPARM_GET_IDENTITY=y
+CONFIG_FEATURE_HDPARM_HDIO_SCAN_HWIF=y
+CONFIG_FEATURE_HDPARM_HDIO_UNREGISTER_HWIF=y
+CONFIG_FEATURE_HDPARM_HDIO_DRIVE_RESET=y
+CONFIG_FEATURE_HDPARM_HDIO_TRISTATE_HWIF=y
+CONFIG_FEATURE_HDPARM_HDIO_GETSET_DMA=y
+CONFIG_MAKEDEVS=y
+# CONFIG_FEATURE_MAKEDEVS_LEAF is not set
+CONFIG_FEATURE_MAKEDEVS_TABLE=y
+CONFIG_MOUNTPOINT=y
+CONFIG_MT=y
+CONFIG_RAIDAUTORUN=y
+CONFIG_READAHEAD=y
+CONFIG_RUNLEVEL=y
+CONFIG_RX=y
+CONFIG_STRINGS=y
+CONFIG_SETSID=y
+CONFIG_TASKSET=y
+CONFIG_FEATURE_TASKSET_FANCY=y
+CONFIG_TIME=y
+CONFIG_TTYSIZE=y
+CONFIG_WATCHDOG=y
+
+#
+# Networking Utilities
+#
+CONFIG_FEATURE_IPV6=y
+# CONFIG_VERBOSE_RESOLUTION_ERRORS is not set
+CONFIG_ARP=y
+CONFIG_ARPING=y
+CONFIG_DNSD=y
+CONFIG_ETHER_WAKE=y
+CONFIG_FAKEIDENTD=y
+CONFIG_FTPGET=y
+CONFIG_FTPPUT=y
+CONFIG_FEATURE_FTPGETPUT_LONG_OPTIONS=y
+CONFIG_HOSTNAME=y
+# CONFIG_HTTPD is not set
+# CONFIG_FEATURE_HTTPD_USE_SENDFILE is not set
+# CONFIG_FEATURE_HTTPD_RELOAD_CONFIG_SIGHUP is not set
+# CONFIG_FEATURE_HTTPD_SETUID is not set
+# CONFIG_FEATURE_HTTPD_BASIC_AUTH is not set
+# CONFIG_FEATURE_HTTPD_AUTH_MD5 is not set
+# CONFIG_FEATURE_HTTPD_CONFIG_WITH_MIME_TYPES is not set
+# CONFIG_FEATURE_HTTPD_CGI is not set
+# CONFIG_FEATURE_HTTPD_CONFIG_WITH_SCRIPT_INTERPR is not set
+# CONFIG_FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV is not set
+# CONFIG_FEATURE_HTTPD_ENCODE_URL_STR is not set
+# CONFIG_FEATURE_HTTPD_ERROR_PAGES is not set
+CONFIG_IFCONFIG=y
+CONFIG_FEATURE_IFCONFIG_STATUS=y
+CONFIG_FEATURE_IFCONFIG_SLIP=y
+CONFIG_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ=y
+CONFIG_FEATURE_IFCONFIG_HW=y
+CONFIG_FEATURE_IFCONFIG_BROADCAST_PLUS=y
+CONFIG_IFUPDOWN=y
+CONFIG_IFUPDOWN_IFSTATE_PATH="/var/run/ifstate"
+CONFIG_FEATURE_IFUPDOWN_IP=y
+CONFIG_FEATURE_IFUPDOWN_IP_BUILTIN=y
+# CONFIG_FEATURE_IFUPDOWN_IFCONFIG_BUILTIN is not set
+CONFIG_FEATURE_IFUPDOWN_IPV4=y
+CONFIG_FEATURE_IFUPDOWN_IPV6=y
+CONFIG_FEATURE_IFUPDOWN_MAPPING=y
+CONFIG_FEATURE_IFUPDOWN_EXTERNAL_DHCP=y
+# CONFIG_INETD is not set
+# CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_ECHO is not set
+# CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DISCARD is not set
+# CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_TIME is not set
+# CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DAYTIME is not set
+# CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_CHARGEN is not set
+# CONFIG_FEATURE_INETD_RPC is not set
+CONFIG_IP=y
+CONFIG_FEATURE_IP_ADDRESS=y
+CONFIG_FEATURE_IP_LINK=y
+CONFIG_FEATURE_IP_ROUTE=y
+CONFIG_FEATURE_IP_TUNNEL=y
+CONFIG_FEATURE_IP_RULE=y
+CONFIG_FEATURE_IP_SHORT_FORMS=y
+CONFIG_IPADDR=y
+CONFIG_IPLINK=y
+CONFIG_IPROUTE=y
+CONFIG_IPTUNNEL=y
+CONFIG_IPRULE=y
+CONFIG_IPCALC=y
+CONFIG_FEATURE_IPCALC_FANCY=y
+CONFIG_FEATURE_IPCALC_LONG_OPTIONS=y
+CONFIG_NAMEIF=y
+CONFIG_NC=y
+CONFIG_NC_SERVER=y
+CONFIG_NC_EXTRA=y
+CONFIG_NETSTAT=y
+# CONFIG_FEATURE_NETSTAT_WIDE is not set
+CONFIG_NSLOOKUP=y
+CONFIG_PING=y
+CONFIG_PING6=y
+CONFIG_PSCAN=y
+CONFIG_FEATURE_FANCY_PING=y
+CONFIG_ROUTE=y
+CONFIG_SLATTACH=y
+CONFIG_TELNET=y
+CONFIG_FEATURE_TELNET_TTYPE=y
+CONFIG_FEATURE_TELNET_AUTOLOGIN=y
+CONFIG_TELNETD=y
+CONFIG_FEATURE_TELNETD_STANDALONE=y
+CONFIG_TFTP=y
+CONFIG_FEATURE_TFTP_GET=y
+CONFIG_FEATURE_TFTP_PUT=y
+CONFIG_FEATURE_TFTP_BLOCKSIZE=y
+# CONFIG_DEBUG_TFTP is not set
+CONFIG_TRACEROUTE=y
+# CONFIG_FEATURE_TRACEROUTE_VERBOSE is not set
+# CONFIG_FEATURE_TRACEROUTE_SOURCE_ROUTE is not set
+# CONFIG_FEATURE_TRACEROUTE_USE_ICMP is not set
+# CONFIG_APP_UDHCPD is not set
+# CONFIG_APP_DHCPRELAY is not set
+# CONFIG_APP_DUMPLEASES is not set
+# CONFIG_FEATURE_UDHCPD_WRITE_LEASES_EARLY is not set
+# CONFIG_APP_UDHCPC is not set
+# CONFIG_FEATURE_UDHCP_DEBUG is not set
+# CONFIG_FEATURE_RFC3397 is not set
+CONFIG_VCONFIG=y
+CONFIG_WGET=y
+CONFIG_FEATURE_WGET_STATUSBAR=y
+CONFIG_FEATURE_WGET_AUTHENTICATION=y
+CONFIG_FEATURE_WGET_LONG_OPTIONS=y
+CONFIG_ZCIP=y
+
+#
+# Process Utilities
+#
+CONFIG_FREE=y
+CONFIG_FUSER=y
+CONFIG_KILL=y
+CONFIG_KILLALL=y
+CONFIG_KILLALL5=y
+CONFIG_NMETER=y
+CONFIG_PIDOF=y
+CONFIG_FEATURE_PIDOF_SINGLE=y
+CONFIG_FEATURE_PIDOF_OMIT=y
+CONFIG_PS=y
+CONFIG_FEATURE_PS_WIDE=y
+CONFIG_RENICE=y
+CONFIG_BB_SYSCTL=y
+CONFIG_TOP=y
+CONFIG_FEATURE_TOP_CPU_USAGE_PERCENTAGE=y
+CONFIG_FEATURE_TOP_CPU_GLOBAL_PERCENTS=y
+CONFIG_FEATURE_TOP_DECIMALS=y
+CONFIG_UPTIME=y
+CONFIG_WATCH=y
+
+#
+# Shells
+#
+CONFIG_FEATURE_SH_IS_ASH=y
+# CONFIG_FEATURE_SH_IS_HUSH is not set
+# CONFIG_FEATURE_SH_IS_LASH is not set
+# CONFIG_FEATURE_SH_IS_MSH is not set
+# CONFIG_FEATURE_SH_IS_NONE is not set
+CONFIG_ASH=y
+
+#
+# Ash Shell Options
+#
+CONFIG_ASH_JOB_CONTROL=y
+CONFIG_ASH_READ_NCHARS=y
+CONFIG_ASH_READ_TIMEOUT=y
+CONFIG_ASH_ALIAS=y
+CONFIG_ASH_MATH_SUPPORT=y
+CONFIG_ASH_MATH_SUPPORT_64=y
+CONFIG_ASH_GETOPTS=y
+CONFIG_ASH_BUILTIN_ECHO=y
+CONFIG_ASH_BUILTIN_TEST=y
+CONFIG_ASH_CMDCMD=y
+CONFIG_ASH_MAIL=y
+CONFIG_ASH_OPTIMIZE_FOR_SIZE=y
+CONFIG_ASH_RANDOM_SUPPORT=y
+CONFIG_ASH_EXPAND_PRMT=y
+# CONFIG_HUSH is not set
+# CONFIG_HUSH_HELP is not set
+# CONFIG_HUSH_INTERACTIVE is not set
+# CONFIG_HUSH_JOB is not set
+# CONFIG_HUSH_TICK is not set
+# CONFIG_HUSH_IF is not set
+# CONFIG_HUSH_LOOPS is not set
+# CONFIG_LASH is not set
+# CONFIG_MSH is not set
+
+#
+# Bourne Shell Options
+#
+CONFIG_FEATURE_SH_EXTRA_QUIET=y
+# CONFIG_FEATURE_SH_STANDALONE is not set
+CONFIG_CTTYHACK=y
+
+#
+# System Logging Utilities
+#
+CONFIG_SYSLOGD=y
+CONFIG_FEATURE_ROTATE_LOGFILE=y
+CONFIG_FEATURE_REMOTE_LOG=y
+CONFIG_FEATURE_IPC_SYSLOG=y
+CONFIG_FEATURE_IPC_SYSLOG_BUFFER_SIZE=16
+CONFIG_LOGREAD=y
+CONFIG_FEATURE_LOGREAD_REDUCED_LOCKING=y
+CONFIG_KLOGD=y
+CONFIG_LOGGER=y
+
+#
+# Runit Utilities
+#
+CONFIG_RUNSV=y
+CONFIG_RUNSVDIR=y
+CONFIG_SV=y
+CONFIG_SVLOGD=y
+CONFIG_CHPST=y
+CONFIG_SETUIDGID=y
+CONFIG_ENVUIDGID=y
+CONFIG_ENVDIR=y
+CONFIG_SOFTLIMIT=y
+# CONFIG_CHCON is not set
+# CONFIG_FEATURE_CHCON_LONG_OPTIONS is not set
+# CONFIG_GETENFORCE is not set
+# CONFIG_GETSEBOOL is not set
+# CONFIG_LOAD_POLICY is not set
+# CONFIG_MATCHPATHCON is not set
+# CONFIG_RESTORECON is not set
+# CONFIG_RUNCON is not set
+# CONFIG_FEATURE_RUNCON_LONG_OPTIONS is not set
+# CONFIG_SELINUXENABLED is not set
+# CONFIG_SETENFORCE is not set
+# CONFIG_SETFILES is not set
+# CONFIG_FEATURE_SETFILES_CHECK_OPTION is not set
+
+#
+# ipsvd utilities
+#
+CONFIG_TCPSVD=y
+CONFIG_UDPSVD=y
diff --git a/source/a/mkinitrd/busybox-1.12.1_inotify.diff b/source/a/mkinitrd/busybox-1.12.1_inotify.diff
new file mode 100644
index 00000000..151d16ce
--- /dev/null
+++ b/source/a/mkinitrd/busybox-1.12.1_inotify.diff
@@ -0,0 +1,11 @@
+--- busybox-1.12.1.orig/miscutils/inotifyd.c 2008-11-07 01:39:21.000000000 +0000
++++ busybox-1.12.1/miscutils/inotifyd.c 2008-11-07 01:37:05.000000000 +0000
+@@ -28,7 +28,7 @@
+ */
+
+ #include "libbb.h"
+-#include <linux/inotify.h>
++#include <sys/inotify.h>
+
+ static volatile smallint signalled;
+
diff --git a/source/a/mkinitrd/busybox-dot-config b/source/a/mkinitrd/busybox-dot-config
new file mode 100644
index 00000000..5987e050
--- /dev/null
+++ b/source/a/mkinitrd/busybox-dot-config
@@ -0,0 +1,857 @@
+#
+# Automatically generated make config: don't edit
+# Busybox version: 1.12.1
+# Fri Nov 7 10:20:30 2008
+#
+CONFIG_HAVE_DOT_CONFIG=y
+
+#
+# Busybox Settings
+#
+
+#
+# General Configuration
+#
+CONFIG_DESKTOP=y
+# CONFIG_EXTRA_COMPAT is not set
+# CONFIG_FEATURE_ASSUME_UNICODE is not set
+CONFIG_FEATURE_BUFFERS_USE_MALLOC=y
+# CONFIG_FEATURE_BUFFERS_GO_ON_STACK is not set
+# CONFIG_FEATURE_BUFFERS_GO_IN_BSS is not set
+CONFIG_SHOW_USAGE=y
+CONFIG_FEATURE_VERBOSE_USAGE=y
+CONFIG_FEATURE_COMPRESS_USAGE=y
+CONFIG_FEATURE_INSTALLER=y
+CONFIG_LOCALE_SUPPORT=y
+CONFIG_GETOPT_LONG=y
+CONFIG_FEATURE_DEVPTS=y
+# CONFIG_FEATURE_CLEAN_UP is not set
+CONFIG_FEATURE_PIDFILE=y
+CONFIG_FEATURE_SUID=y
+CONFIG_FEATURE_SUID_CONFIG=y
+CONFIG_FEATURE_SUID_CONFIG_QUIET=y
+# CONFIG_SELINUX is not set
+# CONFIG_FEATURE_PREFER_APPLETS is not set
+CONFIG_BUSYBOX_EXEC_PATH="/proc/self/exe"
+CONFIG_FEATURE_SYSLOG=y
+CONFIG_FEATURE_HAVE_RPC=y
+
+#
+# Build Options
+#
+CONFIG_STATIC=y
+# CONFIG_PIE is not set
+# CONFIG_NOMMU is not set
+# CONFIG_BUILD_LIBBUSYBOX is not set
+# CONFIG_FEATURE_INDIVIDUAL is not set
+# CONFIG_FEATURE_SHARED_BUSYBOX is not set
+CONFIG_LFS=y
+CONFIG_CROSS_COMPILER_PREFIX=""
+
+#
+# Debugging Options
+#
+# CONFIG_DEBUG is not set
+# CONFIG_DEBUG_PESSIMIZE is not set
+# CONFIG_WERROR is not set
+CONFIG_NO_DEBUG_LIB=y
+# CONFIG_DMALLOC is not set
+# CONFIG_EFENCE is not set
+CONFIG_INCLUDE_SUSv2=y
+# CONFIG_PARSE is not set
+
+#
+# Installation Options
+#
+CONFIG_INSTALL_NO_USR=y
+CONFIG_INSTALL_APPLET_SYMLINKS=y
+# CONFIG_INSTALL_APPLET_HARDLINKS is not set
+# CONFIG_INSTALL_APPLET_SCRIPT_WRAPPERS is not set
+# CONFIG_INSTALL_APPLET_DONT is not set
+# CONFIG_INSTALL_SH_APPLET_SYMLINK is not set
+# CONFIG_INSTALL_SH_APPLET_HARDLINK is not set
+# CONFIG_INSTALL_SH_APPLET_SCRIPT_WRAPPER is not set
+CONFIG_PREFIX="./_install"
+
+#
+# Busybox Library Tuning
+#
+CONFIG_PASSWORD_MINLEN=6
+CONFIG_MD5_SIZE_VS_SPEED=2
+# CONFIG_FEATURE_FAST_TOP is not set
+# CONFIG_FEATURE_ETC_NETWORKS is not set
+CONFIG_FEATURE_EDITING=y
+CONFIG_FEATURE_EDITING_MAX_LEN=1024
+CONFIG_FEATURE_EDITING_VI=y
+CONFIG_FEATURE_EDITING_HISTORY=64
+# CONFIG_FEATURE_EDITING_SAVEHISTORY is not set
+CONFIG_FEATURE_TAB_COMPLETION=y
+# CONFIG_FEATURE_USERNAME_COMPLETION is not set
+CONFIG_FEATURE_EDITING_FANCY_PROMPT=y
+CONFIG_FEATURE_VERBOSE_CP_MESSAGE=y
+CONFIG_FEATURE_COPYBUF_KB=4
+CONFIG_MONOTONIC_SYSCALL=y
+CONFIG_IOCTL_HEX2STR_ERROR=y
+# CONFIG_FEATURE_HWIB is not set
+
+#
+# Applets
+#
+
+#
+# Archival Utilities
+#
+# CONFIG_FEATURE_SEAMLESS_LZMA is not set
+CONFIG_FEATURE_SEAMLESS_BZ2=y
+CONFIG_FEATURE_SEAMLESS_GZ=y
+CONFIG_FEATURE_SEAMLESS_Z=y
+CONFIG_AR=y
+CONFIG_FEATURE_AR_LONG_FILENAMES=y
+CONFIG_BUNZIP2=y
+CONFIG_BZIP2=y
+CONFIG_CPIO=y
+CONFIG_FEATURE_CPIO_O=y
+# CONFIG_DPKG is not set
+# CONFIG_DPKG_DEB is not set
+# CONFIG_FEATURE_DPKG_DEB_EXTRACT_ONLY is not set
+CONFIG_GUNZIP=y
+CONFIG_GZIP=y
+CONFIG_RPM2CPIO=y
+# CONFIG_RPM is not set
+CONFIG_TAR=y
+CONFIG_FEATURE_TAR_CREATE=y
+CONFIG_FEATURE_TAR_AUTODETECT=y
+CONFIG_FEATURE_TAR_FROM=y
+CONFIG_FEATURE_TAR_OLDGNU_COMPATIBILITY=y
+# CONFIG_FEATURE_TAR_OLDSUN_COMPATIBILITY is not set
+CONFIG_FEATURE_TAR_GNU_EXTENSIONS=y
+CONFIG_FEATURE_TAR_LONG_OPTIONS=y
+CONFIG_FEATURE_TAR_UNAME_GNAME=y
+CONFIG_UNCOMPRESS=y
+CONFIG_UNLZMA=y
+CONFIG_FEATURE_LZMA_FAST=y
+CONFIG_UNZIP=y
+
+#
+# Coreutils
+#
+CONFIG_BASENAME=y
+CONFIG_CAL=y
+CONFIG_CAT=y
+CONFIG_CATV=y
+CONFIG_CHGRP=y
+CONFIG_CHMOD=y
+CONFIG_CHOWN=y
+CONFIG_CHROOT=y
+CONFIG_CKSUM=y
+CONFIG_COMM=y
+CONFIG_CP=y
+CONFIG_CUT=y
+CONFIG_DATE=y
+CONFIG_FEATURE_DATE_ISOFMT=y
+CONFIG_DD=y
+CONFIG_FEATURE_DD_SIGNAL_HANDLING=y
+CONFIG_FEATURE_DD_IBS_OBS=y
+CONFIG_DF=y
+CONFIG_FEATURE_DF_INODE=y
+CONFIG_DIRNAME=y
+CONFIG_DOS2UNIX=y
+CONFIG_UNIX2DOS=y
+CONFIG_DU=y
+CONFIG_FEATURE_DU_DEFAULT_BLOCKSIZE_1K=y
+CONFIG_ECHO=y
+CONFIG_FEATURE_FANCY_ECHO=y
+CONFIG_ENV=y
+CONFIG_FEATURE_ENV_LONG_OPTIONS=y
+CONFIG_EXPAND=y
+CONFIG_FEATURE_EXPAND_LONG_OPTIONS=y
+CONFIG_EXPR=y
+CONFIG_EXPR_MATH_SUPPORT_64=y
+CONFIG_FALSE=y
+CONFIG_FOLD=y
+CONFIG_HEAD=y
+CONFIG_FEATURE_FANCY_HEAD=y
+CONFIG_HOSTID=y
+CONFIG_ID=y
+CONFIG_INSTALL=y
+CONFIG_FEATURE_INSTALL_LONG_OPTIONS=y
+CONFIG_LENGTH=y
+CONFIG_LN=y
+CONFIG_LOGNAME=y
+CONFIG_LS=y
+CONFIG_FEATURE_LS_FILETYPES=y
+CONFIG_FEATURE_LS_FOLLOWLINKS=y
+CONFIG_FEATURE_LS_RECURSIVE=y
+CONFIG_FEATURE_LS_SORTFILES=y
+CONFIG_FEATURE_LS_TIMESTAMPS=y
+CONFIG_FEATURE_LS_USERNAME=y
+CONFIG_FEATURE_LS_COLOR=y
+CONFIG_FEATURE_LS_COLOR_IS_DEFAULT=y
+CONFIG_MD5SUM=y
+CONFIG_MKDIR=y
+CONFIG_FEATURE_MKDIR_LONG_OPTIONS=y
+CONFIG_MKFIFO=y
+CONFIG_MKNOD=y
+CONFIG_MV=y
+CONFIG_FEATURE_MV_LONG_OPTIONS=y
+CONFIG_NICE=y
+CONFIG_NOHUP=y
+CONFIG_OD=y
+CONFIG_PRINTENV=y
+CONFIG_PRINTF=y
+CONFIG_PWD=y
+CONFIG_READLINK=y
+CONFIG_FEATURE_READLINK_FOLLOW=y
+CONFIG_REALPATH=y
+CONFIG_RM=y
+CONFIG_RMDIR=y
+# CONFIG_FEATURE_RMDIR_LONG_OPTIONS is not set
+CONFIG_SEQ=y
+CONFIG_SHA1SUM=y
+CONFIG_SLEEP=y
+CONFIG_FEATURE_FANCY_SLEEP=y
+# CONFIG_FEATURE_FLOAT_SLEEP is not set
+CONFIG_SORT=y
+CONFIG_FEATURE_SORT_BIG=y
+CONFIG_SPLIT=y
+CONFIG_FEATURE_SPLIT_FANCY=y
+CONFIG_STAT=y
+CONFIG_FEATURE_STAT_FORMAT=y
+CONFIG_STTY=y
+CONFIG_SUM=y
+CONFIG_SYNC=y
+CONFIG_TAC=y
+CONFIG_TAIL=y
+CONFIG_FEATURE_FANCY_TAIL=y
+CONFIG_TEE=y
+CONFIG_FEATURE_TEE_USE_BLOCK_IO=y
+CONFIG_TEST=y
+CONFIG_FEATURE_TEST_64=y
+CONFIG_TOUCH=y
+CONFIG_TR=y
+CONFIG_FEATURE_TR_CLASSES=y
+CONFIG_FEATURE_TR_EQUIV=y
+CONFIG_TRUE=y
+CONFIG_TTY=y
+CONFIG_UNAME=y
+CONFIG_UNEXPAND=y
+CONFIG_FEATURE_UNEXPAND_LONG_OPTIONS=y
+CONFIG_UNIQ=y
+CONFIG_USLEEP=y
+CONFIG_UUDECODE=y
+CONFIG_UUENCODE=y
+CONFIG_WC=y
+CONFIG_FEATURE_WC_LARGE=y
+CONFIG_WHO=y
+CONFIG_WHOAMI=y
+CONFIG_YES=y
+
+#
+# Common options for cp and mv
+#
+CONFIG_FEATURE_PRESERVE_HARDLINKS=y
+
+#
+# Common options for ls, more and telnet
+#
+CONFIG_FEATURE_AUTOWIDTH=y
+
+#
+# Common options for df, du, ls
+#
+CONFIG_FEATURE_HUMAN_READABLE=y
+
+#
+# Common options for md5sum, sha1sum
+#
+CONFIG_FEATURE_MD5_SHA1_SUM_CHECK=y
+
+#
+# Console Utilities
+#
+CONFIG_CHVT=y
+CONFIG_CLEAR=y
+CONFIG_DEALLOCVT=y
+CONFIG_DUMPKMAP=y
+CONFIG_KBD_MODE=y
+CONFIG_LOADFONT=y
+CONFIG_LOADKMAP=y
+CONFIG_OPENVT=y
+CONFIG_RESET=y
+CONFIG_RESIZE=y
+CONFIG_FEATURE_RESIZE_PRINT=y
+CONFIG_SETCONSOLE=y
+CONFIG_FEATURE_SETCONSOLE_LONG_OPTIONS=y
+CONFIG_SETFONT=y
+CONFIG_SETKEYCODES=y
+CONFIG_SETLOGCONS=y
+CONFIG_SHOWKEY=y
+
+#
+# Debian Utilities
+#
+CONFIG_MKTEMP=y
+CONFIG_PIPE_PROGRESS=y
+CONFIG_RUN_PARTS=y
+CONFIG_FEATURE_RUN_PARTS_LONG_OPTIONS=y
+CONFIG_FEATURE_RUN_PARTS_FANCY=y
+CONFIG_START_STOP_DAEMON=y
+CONFIG_FEATURE_START_STOP_DAEMON_FANCY=y
+CONFIG_FEATURE_START_STOP_DAEMON_LONG_OPTIONS=y
+CONFIG_WHICH=y
+
+#
+# Editors
+#
+CONFIG_AWK=y
+CONFIG_FEATURE_AWK_MATH=y
+CONFIG_CMP=y
+CONFIG_DIFF=y
+CONFIG_FEATURE_DIFF_BINARY=y
+CONFIG_FEATURE_DIFF_DIR=y
+CONFIG_FEATURE_DIFF_MINIMAL=y
+CONFIG_ED=y
+CONFIG_PATCH=y
+CONFIG_SED=y
+CONFIG_VI=y
+CONFIG_FEATURE_VI_MAX_LEN=1024
+CONFIG_FEATURE_VI_8BIT=y
+CONFIG_FEATURE_VI_COLON=y
+CONFIG_FEATURE_VI_YANKMARK=y
+CONFIG_FEATURE_VI_SEARCH=y
+CONFIG_FEATURE_VI_USE_SIGNALS=y
+CONFIG_FEATURE_VI_DOT_CMD=y
+CONFIG_FEATURE_VI_READONLY=y
+CONFIG_FEATURE_VI_SETOPTS=y
+CONFIG_FEATURE_VI_SET=y
+CONFIG_FEATURE_VI_WIN_RESIZE=y
+CONFIG_FEATURE_VI_OPTIMIZE_CURSOR=y
+CONFIG_FEATURE_ALLOW_EXEC=y
+
+#
+# Finding Utilities
+#
+CONFIG_FIND=y
+CONFIG_FEATURE_FIND_PRINT0=y
+CONFIG_FEATURE_FIND_MTIME=y
+CONFIG_FEATURE_FIND_MMIN=y
+CONFIG_FEATURE_FIND_PERM=y
+CONFIG_FEATURE_FIND_TYPE=y
+CONFIG_FEATURE_FIND_XDEV=y
+CONFIG_FEATURE_FIND_MAXDEPTH=y
+CONFIG_FEATURE_FIND_NEWER=y
+CONFIG_FEATURE_FIND_INUM=y
+CONFIG_FEATURE_FIND_EXEC=y
+CONFIG_FEATURE_FIND_USER=y
+CONFIG_FEATURE_FIND_GROUP=y
+CONFIG_FEATURE_FIND_NOT=y
+CONFIG_FEATURE_FIND_DEPTH=y
+CONFIG_FEATURE_FIND_PAREN=y
+CONFIG_FEATURE_FIND_SIZE=y
+CONFIG_FEATURE_FIND_PRUNE=y
+# CONFIG_FEATURE_FIND_DELETE is not set
+CONFIG_FEATURE_FIND_PATH=y
+CONFIG_FEATURE_FIND_REGEX=y
+# CONFIG_FEATURE_FIND_CONTEXT is not set
+CONFIG_GREP=y
+CONFIG_FEATURE_GREP_EGREP_ALIAS=y
+CONFIG_FEATURE_GREP_FGREP_ALIAS=y
+CONFIG_FEATURE_GREP_CONTEXT=y
+CONFIG_XARGS=y
+CONFIG_FEATURE_XARGS_SUPPORT_CONFIRMATION=y
+CONFIG_FEATURE_XARGS_SUPPORT_QUOTES=y
+CONFIG_FEATURE_XARGS_SUPPORT_TERMOPT=y
+CONFIG_FEATURE_XARGS_SUPPORT_ZERO_TERM=y
+
+#
+# Init Utilities
+#
+CONFIG_INIT=y
+# CONFIG_DEBUG_INIT is not set
+CONFIG_FEATURE_USE_INITTAB=y
+CONFIG_FEATURE_KILL_REMOVED=y
+CONFIG_FEATURE_KILL_DELAY=10
+CONFIG_FEATURE_INIT_SCTTY=y
+CONFIG_FEATURE_INIT_SYSLOG=y
+CONFIG_FEATURE_EXTRA_QUIET=y
+# CONFIG_FEATURE_INIT_COREDUMPS is not set
+# CONFIG_FEATURE_INITRD is not set
+CONFIG_HALT=y
+CONFIG_MESG=y
+
+#
+# Login/Password Management Utilities
+#
+CONFIG_FEATURE_SHADOWPASSWDS=y
+# CONFIG_USE_BB_PWD_GRP is not set
+# CONFIG_USE_BB_SHADOW is not set
+CONFIG_USE_BB_CRYPT=y
+CONFIG_ADDGROUP=y
+CONFIG_FEATURE_ADDUSER_TO_GROUP=y
+CONFIG_DELGROUP=y
+CONFIG_FEATURE_DEL_USER_FROM_GROUP=y
+CONFIG_FEATURE_CHECK_NAMES=y
+CONFIG_ADDUSER=y
+# CONFIG_FEATURE_ADDUSER_LONG_OPTIONS is not set
+CONFIG_DELUSER=y
+CONFIG_GETTY=y
+CONFIG_FEATURE_UTMP=y
+CONFIG_FEATURE_WTMP=y
+CONFIG_LOGIN=y
+# CONFIG_PAM is not set
+CONFIG_LOGIN_SCRIPTS=y
+CONFIG_FEATURE_NOLOGIN=y
+# CONFIG_FEATURE_SECURETTY is not set
+CONFIG_PASSWD=y
+CONFIG_FEATURE_PASSWD_WEAK_CHECK=y
+CONFIG_CRYPTPW=y
+CONFIG_CHPASSWD=y
+CONFIG_SU=y
+CONFIG_FEATURE_SU_SYSLOG=y
+CONFIG_FEATURE_SU_CHECKS_SHELLS=y
+CONFIG_SULOGIN=y
+CONFIG_VLOCK=y
+
+#
+# Linux Ext2 FS Progs
+#
+CONFIG_CHATTR=y
+CONFIG_FSCK=y
+CONFIG_LSATTR=y
+
+#
+# Linux Module Utilities
+#
+# CONFIG_MODPROBE_SMALL is not set
+# CONFIG_FEATURE_MODPROBE_SMALL_OPTIONS_ON_CMDLINE is not set
+# CONFIG_FEATURE_MODPROBE_SMALL_CHECK_ALREADY_LOADED is not set
+CONFIG_DEPMOD=y
+# CONFIG_FEATURE_DEPMOD_PRUNE_FANCY is not set
+CONFIG_FEATURE_DEPMOD_ALIAS=y
+CONFIG_INSMOD=y
+# CONFIG_FEATURE_INSMOD_VERSION_CHECKING is not set
+CONFIG_FEATURE_INSMOD_KSYMOOPS_SYMBOLS=y
+# CONFIG_FEATURE_INSMOD_LOADINKMEM is not set
+# CONFIG_FEATURE_INSMOD_LOAD_MAP is not set
+# CONFIG_FEATURE_INSMOD_LOAD_MAP_FULL is not set
+CONFIG_RMMOD=y
+CONFIG_LSMOD=y
+CONFIG_FEATURE_LSMOD_PRETTY_2_6_OUTPUT=y
+CONFIG_MODPROBE=y
+CONFIG_FEATURE_MODPROBE_MULTIPLE_OPTIONS=y
+CONFIG_FEATURE_MODPROBE_FANCY_ALIAS=y
+CONFIG_FEATURE_MODPROBE_BLACKLIST=y
+
+#
+# Options common to multiple modutils
+#
+CONFIG_FEATURE_CHECK_TAINTED_MODULE=y
+CONFIG_FEATURE_2_4_MODULES=y
+CONFIG_FEATURE_2_6_MODULES=y
+CONFIG_DEFAULT_MODULES_DIR="/lib/modules"
+CONFIG_DEFAULT_DEPMOD_FILE="modules.dep"
+# CONFIG_FEATURE_QUERY_MODULE_INTERFACE is not set
+
+#
+# Linux System Utilities
+#
+CONFIG_DMESG=y
+CONFIG_FEATURE_DMESG_PRETTY=y
+CONFIG_FBSET=y
+CONFIG_FEATURE_FBSET_FANCY=y
+CONFIG_FEATURE_FBSET_READMODE=y
+CONFIG_FDFLUSH=y
+CONFIG_FDFORMAT=y
+CONFIG_FDISK=y
+CONFIG_FDISK_SUPPORT_LARGE_DISKS=y
+CONFIG_FEATURE_FDISK_WRITABLE=y
+# CONFIG_FEATURE_AIX_LABEL is not set
+# CONFIG_FEATURE_SGI_LABEL is not set
+# CONFIG_FEATURE_SUN_LABEL is not set
+CONFIG_FEATURE_OSF_LABEL=y
+CONFIG_FEATURE_FDISK_ADVANCED=y
+CONFIG_FINDFS=y
+CONFIG_FREERAMDISK=y
+CONFIG_FSCK_MINIX=y
+CONFIG_MKFS_MINIX=y
+
+#
+# Minix filesystem support
+#
+CONFIG_FEATURE_MINIX2=y
+CONFIG_GETOPT=y
+CONFIG_HEXDUMP=y
+CONFIG_FEATURE_HEXDUMP_REVERSE=y
+CONFIG_HD=y
+CONFIG_HWCLOCK=y
+CONFIG_FEATURE_HWCLOCK_LONG_OPTIONS=y
+CONFIG_FEATURE_HWCLOCK_ADJTIME_FHS=y
+CONFIG_IPCRM=y
+CONFIG_IPCS=y
+CONFIG_LOSETUP=y
+CONFIG_MDEV=y
+CONFIG_FEATURE_MDEV_CONF=y
+CONFIG_FEATURE_MDEV_RENAME=y
+CONFIG_FEATURE_MDEV_RENAME_REGEXP=y
+CONFIG_FEATURE_MDEV_EXEC=y
+CONFIG_FEATURE_MDEV_LOAD_FIRMWARE=y
+CONFIG_MKSWAP=y
+CONFIG_FEATURE_MKSWAP_V0=y
+CONFIG_MORE=y
+CONFIG_FEATURE_USE_TERMIOS=y
+CONFIG_VOLUMEID=y
+CONFIG_FEATURE_VOLUMEID_EXT=y
+CONFIG_FEATURE_VOLUMEID_REISERFS=y
+CONFIG_FEATURE_VOLUMEID_FAT=y
+CONFIG_FEATURE_VOLUMEID_HFS=y
+CONFIG_FEATURE_VOLUMEID_JFS=y
+CONFIG_FEATURE_VOLUMEID_XFS=y
+CONFIG_FEATURE_VOLUMEID_NTFS=y
+CONFIG_FEATURE_VOLUMEID_ISO9660=y
+CONFIG_FEATURE_VOLUMEID_UDF=y
+CONFIG_FEATURE_VOLUMEID_LUKS=y
+CONFIG_FEATURE_VOLUMEID_LINUXSWAP=y
+CONFIG_FEATURE_VOLUMEID_CRAMFS=y
+CONFIG_FEATURE_VOLUMEID_ROMFS=y
+CONFIG_FEATURE_VOLUMEID_SYSV=y
+# CONFIG_FEATURE_VOLUMEID_OCFS2 is not set
+CONFIG_FEATURE_VOLUMEID_LINUXRAID=y
+CONFIG_MOUNT=y
+CONFIG_FEATURE_MOUNT_FAKE=y
+# CONFIG_FEATURE_MOUNT_VERBOSE is not set
+CONFIG_FEATURE_MOUNT_HELPERS=y
+CONFIG_FEATURE_MOUNT_LABEL=y
+CONFIG_FEATURE_MOUNT_NFS=y
+CONFIG_FEATURE_MOUNT_CIFS=y
+CONFIG_FEATURE_MOUNT_FLAGS=y
+CONFIG_FEATURE_MOUNT_FSTAB=y
+CONFIG_PIVOT_ROOT=y
+CONFIG_RDATE=y
+CONFIG_RDEV=y
+CONFIG_READPROFILE=y
+CONFIG_RTCWAKE=y
+CONFIG_SCRIPT=y
+CONFIG_SETARCH=y
+CONFIG_SWAPONOFF=y
+CONFIG_FEATURE_SWAPON_PRI=y
+CONFIG_SWITCH_ROOT=y
+CONFIG_UMOUNT=y
+CONFIG_FEATURE_UMOUNT_ALL=y
+
+#
+# Common options for mount/umount
+#
+CONFIG_FEATURE_MOUNT_LOOP=y
+CONFIG_FEATURE_MTAB_SUPPORT=y
+
+#
+# Miscellaneous Utilities
+#
+CONFIG_ADJTIMEX=y
+CONFIG_BBCONFIG=y
+CONFIG_CHAT=y
+CONFIG_FEATURE_CHAT_NOFAIL=y
+# CONFIG_FEATURE_CHAT_TTY_HIFI is not set
+CONFIG_FEATURE_CHAT_IMPLICIT_CR=y
+# CONFIG_FEATURE_CHAT_SWALLOW_OPTS is not set
+# CONFIG_FEATURE_CHAT_SEND_ESCAPES is not set
+# CONFIG_FEATURE_CHAT_VAR_ABORT_LEN is not set
+# CONFIG_FEATURE_CHAT_CLR_ABORT is not set
+CONFIG_CHRT=y
+CONFIG_CROND=y
+# CONFIG_DEBUG_CROND_OPTION is not set
+# CONFIG_FEATURE_CROND_CALL_SENDMAIL is not set
+CONFIG_CRONTAB=y
+CONFIG_DC=y
+# CONFIG_DEVFSD is not set
+# CONFIG_DEVFSD_MODLOAD is not set
+# CONFIG_DEVFSD_FG_NP is not set
+# CONFIG_DEVFSD_VERBOSE is not set
+# CONFIG_FEATURE_DEVFS is not set
+CONFIG_EJECT=y
+CONFIG_FEATURE_EJECT_SCSI=y
+CONFIG_FBSPLASH=y
+CONFIG_INOTIFYD=y
+CONFIG_LAST=y
+CONFIG_FEATURE_LAST_SMALL=y
+# CONFIG_FEATURE_LAST_FANCY is not set
+CONFIG_LESS=y
+CONFIG_FEATURE_LESS_MAXLINES=9999999
+CONFIG_FEATURE_LESS_BRACKETS=y
+CONFIG_FEATURE_LESS_FLAGS=y
+CONFIG_FEATURE_LESS_FLAGCS=y
+CONFIG_FEATURE_LESS_MARKS=y
+CONFIG_FEATURE_LESS_REGEXP=y
+CONFIG_HDPARM=y
+CONFIG_FEATURE_HDPARM_GET_IDENTITY=y
+CONFIG_FEATURE_HDPARM_HDIO_SCAN_HWIF=y
+CONFIG_FEATURE_HDPARM_HDIO_UNREGISTER_HWIF=y
+CONFIG_FEATURE_HDPARM_HDIO_DRIVE_RESET=y
+CONFIG_FEATURE_HDPARM_HDIO_TRISTATE_HWIF=y
+CONFIG_FEATURE_HDPARM_HDIO_GETSET_DMA=y
+CONFIG_MAKEDEVS=y
+# CONFIG_FEATURE_MAKEDEVS_LEAF is not set
+CONFIG_FEATURE_MAKEDEVS_TABLE=y
+# CONFIG_MAN is not set
+# CONFIG_MICROCOM is not set
+CONFIG_MOUNTPOINT=y
+CONFIG_MT=y
+CONFIG_RAIDAUTORUN=y
+CONFIG_READAHEAD=y
+CONFIG_RUNLEVEL=y
+CONFIG_RX=y
+CONFIG_SETSID=y
+CONFIG_STRINGS=y
+CONFIG_TASKSET=y
+CONFIG_FEATURE_TASKSET_FANCY=y
+CONFIG_TIME=y
+CONFIG_TTYSIZE=y
+CONFIG_WATCHDOG=y
+
+#
+# Networking Utilities
+#
+CONFIG_FEATURE_IPV6=y
+CONFIG_FEATURE_PREFER_IPV4_ADDRESS=y
+# CONFIG_VERBOSE_RESOLUTION_ERRORS is not set
+CONFIG_ARP=y
+CONFIG_ARPING=y
+CONFIG_BRCTL=y
+# CONFIG_FEATURE_BRCTL_FANCY is not set
+# CONFIG_FEATURE_BRCTL_SHOW is not set
+CONFIG_DNSD=y
+CONFIG_ETHER_WAKE=y
+CONFIG_FAKEIDENTD=y
+CONFIG_FTPGET=y
+CONFIG_FTPPUT=y
+CONFIG_FEATURE_FTPGETPUT_LONG_OPTIONS=y
+CONFIG_HOSTNAME=y
+# CONFIG_HTTPD is not set
+# CONFIG_FEATURE_HTTPD_RANGES is not set
+# CONFIG_FEATURE_HTTPD_USE_SENDFILE is not set
+# CONFIG_FEATURE_HTTPD_RELOAD_CONFIG_SIGHUP is not set
+# CONFIG_FEATURE_HTTPD_SETUID is not set
+# CONFIG_FEATURE_HTTPD_BASIC_AUTH is not set
+# CONFIG_FEATURE_HTTPD_AUTH_MD5 is not set
+# CONFIG_FEATURE_HTTPD_CONFIG_WITH_MIME_TYPES is not set
+# CONFIG_FEATURE_HTTPD_CGI is not set
+# CONFIG_FEATURE_HTTPD_CONFIG_WITH_SCRIPT_INTERPR is not set
+# CONFIG_FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV is not set
+# CONFIG_FEATURE_HTTPD_ENCODE_URL_STR is not set
+# CONFIG_FEATURE_HTTPD_ERROR_PAGES is not set
+# CONFIG_FEATURE_HTTPD_PROXY is not set
+CONFIG_IFCONFIG=y
+CONFIG_FEATURE_IFCONFIG_STATUS=y
+CONFIG_FEATURE_IFCONFIG_SLIP=y
+CONFIG_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ=y
+CONFIG_FEATURE_IFCONFIG_HW=y
+CONFIG_FEATURE_IFCONFIG_BROADCAST_PLUS=y
+CONFIG_IFENSLAVE=y
+CONFIG_IFUPDOWN=y
+CONFIG_IFUPDOWN_IFSTATE_PATH="/var/run/ifstate"
+CONFIG_FEATURE_IFUPDOWN_IP=y
+CONFIG_FEATURE_IFUPDOWN_IP_BUILTIN=y
+# CONFIG_FEATURE_IFUPDOWN_IFCONFIG_BUILTIN is not set
+CONFIG_FEATURE_IFUPDOWN_IPV4=y
+CONFIG_FEATURE_IFUPDOWN_IPV6=y
+CONFIG_FEATURE_IFUPDOWN_MAPPING=y
+CONFIG_FEATURE_IFUPDOWN_EXTERNAL_DHCP=y
+# CONFIG_INETD is not set
+# CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_ECHO is not set
+# CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DISCARD is not set
+# CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_TIME is not set
+# CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DAYTIME is not set
+# CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_CHARGEN is not set
+# CONFIG_FEATURE_INETD_RPC is not set
+CONFIG_IP=y
+CONFIG_FEATURE_IP_ADDRESS=y
+CONFIG_FEATURE_IP_LINK=y
+CONFIG_FEATURE_IP_ROUTE=y
+CONFIG_FEATURE_IP_TUNNEL=y
+CONFIG_FEATURE_IP_RULE=y
+CONFIG_FEATURE_IP_SHORT_FORMS=y
+# CONFIG_FEATURE_IP_RARE_PROTOCOLS is not set
+CONFIG_IPADDR=y
+CONFIG_IPLINK=y
+CONFIG_IPROUTE=y
+CONFIG_IPTUNNEL=y
+CONFIG_IPRULE=y
+CONFIG_IPCALC=y
+CONFIG_FEATURE_IPCALC_FANCY=y
+CONFIG_FEATURE_IPCALC_LONG_OPTIONS=y
+CONFIG_NAMEIF=y
+# CONFIG_FEATURE_NAMEIF_EXTENDED is not set
+CONFIG_NC=y
+CONFIG_NC_SERVER=y
+CONFIG_NC_EXTRA=y
+CONFIG_NETSTAT=y
+# CONFIG_FEATURE_NETSTAT_WIDE is not set
+CONFIG_FEATURE_NETSTAT_PRG=y
+CONFIG_NSLOOKUP=y
+CONFIG_PING=y
+CONFIG_PING6=y
+CONFIG_FEATURE_FANCY_PING=y
+CONFIG_PSCAN=y
+CONFIG_ROUTE=y
+# CONFIG_SENDMAIL is not set
+# CONFIG_FETCHMAIL is not set
+CONFIG_SLATTACH=y
+CONFIG_TELNET=y
+CONFIG_FEATURE_TELNET_TTYPE=y
+CONFIG_FEATURE_TELNET_AUTOLOGIN=y
+CONFIG_TELNETD=y
+CONFIG_FEATURE_TELNETD_STANDALONE=y
+CONFIG_TFTP=y
+# CONFIG_TFTPD is not set
+CONFIG_FEATURE_TFTP_GET=y
+CONFIG_FEATURE_TFTP_PUT=y
+CONFIG_FEATURE_TFTP_BLOCKSIZE=y
+# CONFIG_DEBUG_TFTP is not set
+CONFIG_TRACEROUTE=y
+# CONFIG_FEATURE_TRACEROUTE_VERBOSE is not set
+# CONFIG_FEATURE_TRACEROUTE_SOURCE_ROUTE is not set
+# CONFIG_FEATURE_TRACEROUTE_USE_ICMP is not set
+# CONFIG_APP_UDHCPD is not set
+# CONFIG_APP_DHCPRELAY is not set
+# CONFIG_APP_DUMPLEASES is not set
+# CONFIG_FEATURE_UDHCPD_WRITE_LEASES_EARLY is not set
+CONFIG_DHCPD_LEASES_FILE=""
+# CONFIG_APP_UDHCPC is not set
+# CONFIG_FEATURE_UDHCPC_ARPING is not set
+# CONFIG_FEATURE_UDHCP_PORT is not set
+# CONFIG_FEATURE_UDHCP_DEBUG is not set
+# CONFIG_FEATURE_RFC3397 is not set
+CONFIG_DHCPC_DEFAULT_SCRIPT=""
+CONFIG_UDHCPC_SLACK_FOR_BUGGY_SERVERS=
+CONFIG_VCONFIG=y
+CONFIG_WGET=y
+CONFIG_FEATURE_WGET_STATUSBAR=y
+CONFIG_FEATURE_WGET_AUTHENTICATION=y
+CONFIG_FEATURE_WGET_LONG_OPTIONS=y
+CONFIG_ZCIP=y
+CONFIG_TCPSVD=y
+CONFIG_UDPSVD=y
+
+#
+# Process Utilities
+#
+CONFIG_FREE=y
+CONFIG_FUSER=y
+CONFIG_KILL=y
+CONFIG_KILLALL=y
+CONFIG_KILLALL5=y
+CONFIG_NMETER=y
+CONFIG_PGREP=y
+CONFIG_PIDOF=y
+CONFIG_FEATURE_PIDOF_SINGLE=y
+CONFIG_FEATURE_PIDOF_OMIT=y
+CONFIG_PKILL=y
+CONFIG_PS=y
+CONFIG_FEATURE_PS_WIDE=y
+CONFIG_FEATURE_PS_TIME=y
+# CONFIG_FEATURE_PS_UNUSUAL_SYSTEMS is not set
+CONFIG_RENICE=y
+CONFIG_BB_SYSCTL=y
+CONFIG_TOP=y
+CONFIG_FEATURE_TOP_CPU_USAGE_PERCENTAGE=y
+CONFIG_FEATURE_TOP_CPU_GLOBAL_PERCENTS=y
+CONFIG_FEATURE_TOP_DECIMALS=y
+CONFIG_FEATURE_TOPMEM=y
+CONFIG_UPTIME=y
+CONFIG_WATCH=y
+
+#
+# Shells
+#
+CONFIG_FEATURE_SH_IS_ASH=y
+# CONFIG_FEATURE_SH_IS_HUSH is not set
+# CONFIG_FEATURE_SH_IS_MSH is not set
+# CONFIG_FEATURE_SH_IS_NONE is not set
+CONFIG_ASH=y
+
+#
+# Ash Shell Options
+#
+CONFIG_ASH_BASH_COMPAT=y
+CONFIG_ASH_JOB_CONTROL=y
+CONFIG_ASH_READ_NCHARS=y
+CONFIG_ASH_READ_TIMEOUT=y
+CONFIG_ASH_ALIAS=y
+CONFIG_ASH_MATH_SUPPORT=y
+CONFIG_ASH_MATH_SUPPORT_64=y
+CONFIG_ASH_GETOPTS=y
+CONFIG_ASH_BUILTIN_ECHO=y
+CONFIG_ASH_BUILTIN_PRINTF=y
+CONFIG_ASH_BUILTIN_TEST=y
+CONFIG_ASH_CMDCMD=y
+CONFIG_ASH_MAIL=y
+CONFIG_ASH_OPTIMIZE_FOR_SIZE=y
+CONFIG_ASH_RANDOM_SUPPORT=y
+CONFIG_ASH_EXPAND_PRMT=y
+# CONFIG_HUSH is not set
+# CONFIG_HUSH_HELP is not set
+# CONFIG_HUSH_INTERACTIVE is not set
+# CONFIG_HUSH_JOB is not set
+# CONFIG_HUSH_TICK is not set
+# CONFIG_HUSH_IF is not set
+# CONFIG_HUSH_LOOPS is not set
+# CONFIG_HUSH_CASE is not set
+# CONFIG_LASH is not set
+# CONFIG_MSH is not set
+
+#
+# Bourne Shell Options
+#
+CONFIG_FEATURE_SH_EXTRA_QUIET=y
+# CONFIG_FEATURE_SH_STANDALONE is not set
+# CONFIG_FEATURE_SH_NOFORK is not set
+CONFIG_CTTYHACK=y
+
+#
+# System Logging Utilities
+#
+CONFIG_SYSLOGD=y
+CONFIG_FEATURE_ROTATE_LOGFILE=y
+CONFIG_FEATURE_REMOTE_LOG=y
+# CONFIG_FEATURE_SYSLOGD_DUP is not set
+CONFIG_FEATURE_IPC_SYSLOG=y
+CONFIG_FEATURE_IPC_SYSLOG_BUFFER_SIZE=16
+CONFIG_LOGREAD=y
+CONFIG_FEATURE_LOGREAD_REDUCED_LOCKING=y
+CONFIG_KLOGD=y
+CONFIG_LOGGER=y
+
+#
+# Runit Utilities
+#
+CONFIG_RUNSV=y
+CONFIG_RUNSVDIR=y
+CONFIG_SV=y
+CONFIG_SVLOGD=y
+CONFIG_CHPST=y
+CONFIG_SETUIDGID=y
+CONFIG_ENVUIDGID=y
+CONFIG_ENVDIR=y
+CONFIG_SOFTLIMIT=y
+# CONFIG_CHCON is not set
+# CONFIG_FEATURE_CHCON_LONG_OPTIONS is not set
+# CONFIG_GETENFORCE is not set
+# CONFIG_GETSEBOOL is not set
+# CONFIG_LOAD_POLICY is not set
+# CONFIG_MATCHPATHCON is not set
+# CONFIG_RESTORECON is not set
+# CONFIG_RUNCON is not set
+# CONFIG_FEATURE_RUNCON_LONG_OPTIONS is not set
+# CONFIG_SELINUXENABLED is not set
+# CONFIG_SETENFORCE is not set
+# CONFIG_SETFILES is not set
+# CONFIG_FEATURE_SETFILES_CHECK_OPTION is not set
+# CONFIG_SETSEBOOL is not set
+# CONFIG_SESTATUS is not set
+
+#
+# Print Utilities
+#
+# CONFIG_LPD is not set
+CONFIG_LPR=y
+# CONFIG_LPQ is not set
diff --git a/source/a/mkinitrd/init b/source/a/mkinitrd/init
new file mode 100755
index 00000000..0559932e
--- /dev/null
+++ b/source/a/mkinitrd/init
@@ -0,0 +1,230 @@
+#!/bin/ash
+#
+# /init: init script to load kernel modules from an initramfs
+# This requires that your kernel supports initramfs!!!
+#
+# Copyright 2004 Slackware Linux, Inc., Concord, CA, USA
+# Copyright 2007, 2008 Patrick J. Volkerding, Sebeka, MN, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
+# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+# With a generic kernel, you need to load the modules needed to mount the
+# root partition. This might mean a SCSI, RAID, or other drive controller
+# module, as well as the module to support the root filesystem. Once the
+# root partition is mounted all the other modules will be available so you
+# don't need to load them here.
+#
+# Config files used by this script:
+#
+# /rootdev Contains the name of the root device, such as: /dev/hda1
+#
+# /rootfs Contains the root filesystem type, such as: xfs
+#
+# /initrd-name Contains the name of the initrd file.
+#
+# Optional:
+# /load_kernel_modules A script that uses insmod to load the desired
+# modules. If this file is not present, all the modules
+# in /lib/modules/`uname -r`/ will be loaded in the usual
+# sorted order. If you need to load the modules in a
+# certain order, or if the modules need extra options,
+# then use a load_kernel_modules script.
+#
+# There's an example in here. To actually use it, you'll
+# need to make it executable:
+#
+# chmod 755 load_kernel_modules
+
+INITRD=`cat /initrd-name`
+ROOTDEV=`cat /rootdev`
+ROOTFS=`cat /rootfs`
+LUKSDEV=`cat /luksdev`
+RESUMEDEV=`cat /resumedev`
+WAIT=`cat /wait-for-root`
+KEYMAP=`cat /keymap`
+
+# Mount /proc and /sys:
+mount -n proc /proc -t proc
+mount -n sysfs /sys -t sysfs
+
+# Parse command line
+for ARG in `cat /proc/cmdline`; do
+ case $ARG in
+ rescue)
+ RESCUE=1
+ ;;
+ root=/dev/*)
+ ROOTDEV=`echo $ARG | cut -f2 -d=`
+ ;;
+ rootfs=*)
+ ROOTFS=`echo $ARG | cut -f2 -d=`
+ ;;
+ luksdev=/dev/*)
+ LUKSDEV=`echo $ARG | cut -f2 -d=`
+ ;;
+ waitforroot=*)
+ WAIT=`echo $ARG | cut -f2 -d=`
+ ;;
+ root=LABEL=*)
+ ROOTDEV=`echo $ARG | cut -f2- -d=`
+ ;;
+ resume=*)
+ RESUMEDEV=`echo $ARG | cut -f2 -d=`
+ ;;
+ 0|1|2|3|4|5|6)
+ RUNLEVEL=$ARG
+ ;;
+ esac
+done
+
+# Load kernel modules:
+if [ ! -d /lib/modules/`uname -r` ]; then
+ echo "No kernel modules found for Linux `uname -r`."
+elif [ -x ./load_kernel_modules ]; then # use load_kernel_modules script:
+ echo "${INITRD}: Loading kernel modules from initrd image:"
+ . ./load_kernel_modules
+else # load modules (if any) in order:
+ if ls /lib/modules/`uname -r`/*.*o 1> /dev/null 2> /dev/null ; then
+ echo "${INITRD}: Loading kernel modules from initrd image:"
+ for module in /lib/modules/`uname -r`/*.*o ; do
+ insmod $module
+ done
+ unset module
+ fi
+fi
+
+# Sometimes the devices needs extra time to be available.
+# root on USB are good example of that.
+sleep $WAIT
+
+# If udevd is available, use it to generate block devices
+# else use mdev to read sysfs and generate the needed devices
+if [ -x /sbin/udevd -a -x /sbin/udevadm ]; then
+ /sbin/udevd --daemon
+ /sbin/udevadm trigger --subsystem-match=block
+ /sbin/udevadm settle --timeout=10
+else
+ mdev -s
+fi
+
+# Load a custom keyboard mapping:
+if [ -n "$KEYMAP" ]; then
+ echo "${INITRD}: Loading '$KEYMAP' keyboard mapping:"
+ tar xzOf /etc/keymaps.tar.gz ${KEYMAP}.bmap | loadkmap
+fi
+
+if [ "$RESCUE" = "" ]; then
+ # Initialize RAID:
+ if [ -x /sbin/mdadm ]; then
+ /sbin/mdadm -E -s >/etc/mdadm.conf
+ /sbin/mdadm -A -s
+ fi
+
+ # Find root device if a label was given:
+ if echo $ROOTDEV | grep -q "LABEL=" ; then
+ ROOTDEV=`findfs $ROOTDEV`
+ fi
+
+ # Make encrypted root partition available:
+ # The useable device will be under /dev/mapper/
+ # Three scenarios for the commandline exist:
+ # 1- ROOTDEV is on a LUKS volume, and LUKSDEV is a real block device
+ # 2- ROOTDEV is on a LVM volume, and LUKSDEV is a real block device
+ # 3- ROOTDEV is on a LUKS volume, and LUKSDEV is on a LVM volume
+ # Case (3) will have to wait until we initialize the LVM.
+ # Test if ROOTDEV is "/dev/someting" or just "something" - the first means
+ # ROOTDEV is on a LVM volume (scenario 2); we don't need to rewrite ROOTDEV.
+ # The second means that ROOTDEV is on a LUKS volume (scenario 1).
+ CRYPTDEV=""
+ if [ -x /sbin/cryptsetup ]; then
+ # If we find a LUKS device now, it is on a real block device:
+ if /sbin/cryptsetup isLuks ${LUKSDEV} 1>/dev/null 2>/dev/null ; then
+ CRYPTDEV=$(basename $ROOTDEV)
+ echo "Unlocking LUKS crypt volume '${CRYPTDEV}' on device '$LUKSDEV':"
+ /sbin/cryptsetup luksOpen ${LUKSDEV} $CRYPTDEV </dev/systty >/dev/systty 2>&1
+ if [ "$CRYPTDEV" == "$ROOTDEV" ]; then # scenario 1
+ ROOTDEV="/dev/mapper/${CRYPTDEV}"
+ fi
+ fi
+ fi
+
+ # Initialize LVM:
+ if [ -x /sbin/vgscan ]; then
+ /sbin/vgscan --mknodes --ignorelockingfailure
+ sleep 10
+ /sbin/vgchange -ay --ignorelockingfailure
+ fi
+
+ # Make encrypted root partition available (scenario 3):
+ # We have to handle cases here where the LUKS volume is created on a LV
+ if [ -x /sbin/cryptsetup ]; then
+ if /sbin/cryptsetup isLuks ${LUKSDEV} 1>/dev/null 2>/dev/null ; then
+ # Only act if we could not open the LUKS device before (i.e. is on a LV):
+ if [ "x$CRYPTDEV" == "x" ]; then
+ echo "Unlocking LUKS crypt volume '${ROOTDEV}' on device '$LUKSDEV':"
+ /sbin/cryptsetup luksOpen ${LUKSDEV} $ROOTDEV </dev/systty >/dev/systty 2>&1
+ ROOTDEV="/dev/mapper/${ROOTDEV}"
+ fi
+ fi
+ fi
+
+ # Resume state from swap
+ if [ "$RESUMEDEV" != "" ]; then
+ if ls -l $RESUMEDEV | grep -q "^l" ; then
+ RESUMEDEV=`ls -l $RESUMEDEV | awk '{ print $NF }'`
+ fi
+ echo "Trying to resume from $RESUMEDEV"
+ RESMAJMIN=`ls -l $RESUMEDEV | tr , : | awk '{ print $5$6 }'`
+ echo $RESMAJMIN > /sys/power/resume
+ fi
+
+ # Switch to real root partition:
+ echo 0x0100 > /proc/sys/kernel/real-root-dev
+ mount -o ro -t $ROOTFS $ROOTDEV /mnt
+
+ if [ ! -r /mnt/sbin/init ]; then
+ echo "ERROR: No /sbin/init found on rootdev (or not mounted). Trouble ahead."
+ echo " You can try to fix it. Type 'exit' when things are done."
+ echo
+ /bin/sh
+ fi
+else
+ echo "RESCUE mode"
+ echo
+ echo " You can try to fix or rescue your system now. If you want"
+ echo " to boot into your fixed system, mount your root filesystem"
+ echo " read-only under /mnt:"
+ echo
+ echo " # mount -o ro -t filesystem root_device /mnt"
+ echo
+ echo " Type 'exit' when things are done."
+ echo
+ /bin/sh
+fi
+
+if ps axc | grep -q udevd ; then
+ killall udevd
+fi
+
+unset ERR
+umount /proc
+umount /sys
+echo "${INITRD}: exiting"
+exec switch_root /mnt /sbin/init $RUNLEVEL
diff --git a/source/a/mkinitrd/mkinitrd b/source/a/mkinitrd/mkinitrd
new file mode 100644
index 00000000..8f77725f
--- /dev/null
+++ b/source/a/mkinitrd/mkinitrd
@@ -0,0 +1,494 @@
+#!/bin/sh
+# Copyright 2004 Slackware Linux, Inc., Concord, CA, USA
+# Copyright 2004 Patrick J. Volkerding, Concord, CA, USA
+# Copyright 2007, 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
+# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+# Modified by Robby Workman <rworkman@slackware.com> 26 November 2007
+# to add support for mkinitrd.conf - No additional license terms added
+# Modified by Alan Hicks <alan@slackware.com> 27 November 2007 to enable
+# passing arguments to kernel modules - No additional license terms added
+# volkerdi - feel free to remove these :)
+# Modified by Eric Hameleers <alien@slackware.com> 3 April 2008
+# to add support custom keymaps - No additional license terms added
+# Modified by Patrick Volkerding <volkerdi@slackware.com> 17 Dec 2008
+# Added support to bail out if kernel modules are requested for a kernel
+# version that is not installed (thanks to Eric Hameleers), be more
+# verbose about showing modules added to the initrd (thanks to
+# Ellington Santos), and if "mount" returns /dev/root as the root device,
+# use readlink to resolve the device pointed to by the /dev/root
+# symlink, changed modprobe to use --ignore-install to avoid catching
+# custom "install" lines and causing /sbin/modprobe to be copied to the
+# initrd (thanks to Ken Milmore).
+# Of course, license terms remain unchanged.
+
+MKINITRD_VERSION=1.3.4
+
+print_usage() {
+ cat << EOF
+Usage: mkinitrd [OPTION]
+
+mkinitrd creates an initial ramdisk (actually an initramfs cpio+gzip
+archive) used to load kernel modules that are needed to mount the
+root filesystem, or other modules that might be needed before the
+root filesystem is available. Other binaries may be added to the
+initrd, and the script is easy to modify. Be creative. :-)
+
+ -F Use the contents of /etc/mkinitrd.conf (optional)
+ If this is used in conjunction with any other options passed
+ on the command line, the command-line options will override
+ the config file options. See mkinitrd.conf(5) for details.
+ -c Clear the existing initrd tree first
+ -f Filesystem to use for root partition (must be used with -r)
+ --help Display this message
+ -h Device to resume from hibernation. Needs to be the name of
+ the swap partition holding the hibernation image.
+ -k Kernel version to use
+ -l Custom keymap to load. Like, 'nl' or 'de-latin1-nodeadkeys'
+ -m A colon (:) delimited list of kernel modules to load.
+ Additional options may be added to use when loading the
+ kernel modules (but in this case the entire list must be
+ wrapped with double quotes). Any dependencies of requested
+ modules will also be added to the initrd.
+ -o Output image (default /boot/initrd.gz)
+ -r Root partition device (must be used with -f)
+ -s Initrd source tree (default /boot/initrd-tree/)
+ -w Time to wait until all disks are detected
+ -C Use cryptsetup to unlock the underlying device of an
+ encrypted root filesystem (must be used with '-r' parameter).
+ Two scenarios are possible. (1) root filesystem was created on the
+ encrypted disk/LVM partition, example:
+ -C /dev/sda2 -r cryptroot
+ where /dev/sda2 is the encrypted partition and
+ the actual root device name in /etc/fstab is:
+ /dev/mapper/cryptroot
+ (2) the encrypted partition contains a LVM volume which holds the
+ root filesystem, example:
+ -C /dev/sda2 -r /dev/vg/root
+ where /dev/sda2 is the encrypted partition and
+ the actual root device name in /etc/fstab is:
+ /dev/vg/root
+ -L Add support for LVM partitions
+ -R Add support for RAID partitions
+ -V Display version number
+
+A simple example: Build an initrd for a reiserfs root partition:
+
+ mkinitrd -c -m reiserfs
+
+Another example: Build an initrd image using Linux 2.6.29.3-smp kernel
+modules for a system with an ext3 root partition on /dev/hdb3:
+
+ mkinitrd -c -k 2.6.29.3-smp -m mbcache:jbd:ext3 -f ext3 -r /dev/hdb3
+
+Note that if you are already logged in with /dev/hdb3 as your /
+partition, and it is running ext3, this command works just the same:
+
+ mkinitrd -c -m ext3
+
+If run without options, mkinitrd will rebuild an initrd image using
+the contents of the $SOURCE_TREE directory, or, if that directory
+does not exist it will be created and populated, and then mkinitrd
+will exit.
+
+EOF
+}
+
+create_new_source_tree() {
+ mkdir -p $SOURCE_TREE
+ # Make sure a kernel module directory exists:
+ mkdir -p $SOURCE_TREE/lib/modules/${KERNEL_VERSION}
+ # Add the initrd-tree skeleton:
+ ( cd $SOURCE_TREE ; tar xzf /usr/share/mkinitrd/initrd-tree.tar.gz )
+ # Make sure we have any block devices that might be needed:
+
+ SLOPPY_DEV_LIST=$(cat /proc/partitions)
+ for device in $SLOPPY_DEV_LIST ; do
+ if [ ! -r $SOURCE_TREE/dev/$device ]; then
+ if [ -b /dev/$device ]; then
+ if [ -L /dev/$device ]; then
+ cp -a --parents $(readlink -e /dev/$device) $SOURCE_TREE
+ fi
+ cp -a --parents /dev/$device $SOURCE_TREE
+ fi
+ fi
+ done
+}
+
+clear_source_tree() {
+ if [ -d "$SOURCE_TREE" ]; then
+ rm -rf $SOURCE_TREE
+ fi
+}
+
+build_initrd_image() {
+ # Make sure we have any block devices that might be needed:
+ SLOPPY_DEV_LIST=$(cat /proc/partitions)
+ for device in $SLOPPY_DEV_LIST ; do
+ if [ ! -r $SOURCE_TREE/dev/$device ]; then
+ if [ -b /dev/$device ]; then
+ if [ -L /dev/$device ]; then
+ cp -a --parents $(readlink -e /dev/$device) $SOURCE_TREE
+ fi
+ cp -a --parents /dev/$device $SOURCE_TREE
+ fi
+ fi
+ done
+ # Wrap the initrd as an initramfs image and move it into place:
+ ( cd $SOURCE_TREE
+ rm -f $OUTPUT_IMAGE
+ find . | cpio -o -H newc | gzip -9c > $OUTPUT_IMAGE
+ )
+}
+
+badconf_file() {
+ # This won't really help with what's *wrong* with the file,
+ # but it will at least give them a clue that there's a problem
+ echo "/etc/mkinitrd.conf is bad or does not exist."
+ echo "If the file does not exist, do not pass -F to mkinitrd."
+ exit 1
+}
+
+# If --help is given, print_usage and exit:
+if echo $* | grep -wq '\--help' ; then
+ print_usage
+ exit 0
+fi
+
+# If -V given, print version and exit:
+if echo $* | grep -wq '\-V' ; then
+ echo "mkinitrd version $MKINITRD_VERSION"
+ exit 0
+fi
+
+# Default values if these aren't previously set.
+# Might be set from config file or by -s and -o options too.
+SOURCE_TREE=${SOURCE_TREE:-/boot/initrd-tree}
+OUTPUT_IMAGE=${OUTPUT_IMAGE:-/boot/initrd.gz}
+KERNEL_VERSION=${KERNEL_VERSION:-"$(uname -r)"}
+
+# Default actions without options:
+if [ -z "$1" ]; then
+ # If the output tree doesn't exist, create it and then exit:
+ if [ ! -d $SOURCE_TREE ]; then
+ echo "Nothing found at location $SOURCE_TREE, so we will create an"
+ echo -n "initrd directory structure there... "
+ create_new_source_tree
+ echo "done."
+ echo
+ echo "Now cd to $SOURCE_TREE and install some modules in your"
+ echo "module directory (lib/modules/${KERNEL_VERSION}). Then see init"
+ echo "for more information (there are a few other files to edit)."
+ echo "Finally, run mkinitrd again once the initrd-tree is ready,"
+ echo "and $OUTPUT_IMAGE will be created from it."
+ echo
+ exit 0
+ else
+ # If the source tree does exist, the default is to build the initrd
+ # image from it and then exit:
+ build_initrd_image
+ echo "$OUTPUT_IMAGE created."
+ echo "Be sure to run lilo again if you use it."
+ exit 0
+ fi
+fi # default no-option actions
+
+# Parse for the use config file option first or else the other command
+# line options can not override /etc/mkinitrd.conf.
+for opt in "$@"; do
+ if [ $opt = "-F" ]; then
+ if [ -e /etc/mkinitrd.conf ]; then
+ . /etc/mkinitrd.conf || badconf_file
+ else
+ badconf_file
+ fi
+ fi
+done
+
+# Parse options:
+while [ ! -z "$1" ]; do
+ case $1 in
+ -c)
+ CLEAR_TREE=1
+ shift
+ ;;
+ -f)
+ ROOTFS="$2"
+ shift 2
+ ;;
+ -h)
+ RESUMEDEV="$2"
+ shift 2
+ ;;
+ -k)
+ KERNEL_VERSION="$2"
+ shift 2
+ ;;
+ -l)
+ KEYMAP="$2"
+ shift 2
+ ;;
+ -m)
+ MODULE_LIST="$2"
+ shift 2
+ ;;
+ -o)
+ OUTPUT_IMAGE="$2"
+ if [ ! "$(echo $OUTPUT_IMAGE | cut -b1)" = "/" ]; then
+ OUTPUT_IMAGE=$(pwd)/$OUTPUT_IMAGE
+ fi
+ shift 2
+ ;;
+ -r)
+ ROOTDEV="$2"
+ shift 2
+ ;;
+ -s)
+ SOURCE_TREE="$2"
+ shift 2
+ ;;
+ -w)
+ WAIT="$2"
+ shift 2
+ ;;
+ -C)
+ CRYPT=1
+ LUKSDEV="$2"
+ shift 2
+ ;;
+ -L)
+ LVM=1
+ shift
+ ;;
+ -R)
+ RAID=1
+ shift
+ ;;
+ *) # unknown, prevent infinite loop
+ shift
+ ;;
+ esac
+done
+
+# If kernel modules are needed but the kernel version is absent, exit now:
+if [ ! -d /lib/modules/$KERNEL_VERSION ]; then
+ echo "ERROR: No /lib/modules/$KERNEL_VERSION kernel modules tree found for kernel \"$KERNEL_VERSION\""
+ exit 1
+fi
+
+# If clearing source tree was requested, do that first
+if [ "$CLEAR_TREE" = "1" ]; then
+ clear_source_tree
+fi
+
+# If there's no $SOURCE_TREE, make one now:
+if [ ! -d "$SOURCE_TREE" ]; then
+ create_new_source_tree
+fi
+
+# If $ROOTDEV and $ROOTFS are not set, assume we want the
+# values for the currently mounted /
+# (unless we find that values are already set in the initrd-tree):
+if [ -z "$ROOTDEV" -a -z "$(cat $SOURCE_TREE/rootdev 2> /dev/null)" ]; then
+ ROOTDEV=$(mount | grep ' on / ' | cut -f 1 -d ' ')
+ if [ "$ROOTDEV" = "/dev/root" ]; then # find real root device
+ ROOTDEV="/dev/$(readlink /dev/root)"
+ fi
+fi
+if [ -z "$ROOTFS" -a -z "$(cat $SOURCE_TREE/rootfs 2> /dev/null)" ]; then
+ ROOTFS=$(mount | grep ' on / ' | cut -f 5 -d ' ')
+fi
+# If needed, write them in the initrd-tree:
+if [ ! -z "$ROOTDEV" ]; then
+ echo $ROOTDEV > $SOURCE_TREE/rootdev
+fi
+if [ ! -z "$ROOTFS" ]; then
+ echo $ROOTFS > $SOURCE_TREE/rootfs
+fi
+
+# If $WAIT is not set, assume we need only one second
+# to have all devices done
+# (unless we find that value is already set in the initrd-tree):
+if [ -z "$WAIT" -a -z "$(cat $SOURCE_TREE/wait-for-root)" ]; then
+ WAIT=1
+fi
+if [ ! -z "$WAIT" ]; then
+ echo $WAIT > $SOURCE_TREE/wait-for-root
+fi
+
+# Useful to know which initrd is running:
+INITRD_NAME=$(basename $OUTPUT_IMAGE)
+echo $INITRD_NAME > $SOURCE_TREE/initrd-name
+
+# Fill /resumedev with the swap partition holding the hibernation image
+if [ ! -z "$RESUMEDEV" ]; then
+ echo $RESUMEDEV > $SOURCE_TREE/resumedev
+fi
+
+# Add custom keymap support if one was given
+if [ ! -z "$KEYMAP" ]; then
+ echo $KEYMAP > $SOURCE_TREE/keymap
+ cp /usr/share/mkinitrd/keymaps.tar.gz $SOURCE_TREE/etc/
+fi
+
+# If LUKSDEV was set in the config file, then we need to set CRYPT=1
+if [ ! -z "$LUKSDEV" ]; then
+ CRYPT=1
+fi
+
+# Include RAID support in initrd
+if [ ! -z "$RAID" ]; then
+ if [ -r /sbin/mdadm ]; then
+ mkdir -p $SOURCE_TREE/sbin
+ cp /sbin/mdadm $SOURCE_TREE/sbin/mdadm
+ chmod 755 $SOURCE_TREE/sbin/mdadm
+ else
+ echo "ERROR: mdadm binary is missing, RAID support not installed"
+ fi
+fi
+
+# Include LVM support in initrd
+if [ ! -z "$LVM" ]; then
+ if [ -f /sbin/lvm.static ]; then
+ mkdir -p $SOURCE_TREE/sbin
+ cp /sbin/lvm.static $SOURCE_TREE/sbin/lvm.static
+ cp /sbin/dmsetup.static $SOURCE_TREE/sbin/dmsetup.static
+ ( cd $SOURCE_TREE/sbin
+ ln -s lvm.static vgchange 2>/dev/null
+ ln -s lvm.static vgscan 2>/dev/null )
+ if [ -z "${MODULE_LIST}" ] ; then
+ MODULE_LIST="dm-mod"
+ elif ! echo ${MODULE_LIST} | grep -q dm-mod ; then
+ MODULE_LIST="$MODULE_LIST:dm-mod"
+ fi
+ else
+ echo "LVM static binary is missing, LVM support isn't installed"
+ fi
+fi
+
+# Include cryptsetup (LUKS) support in initrd
+if [ ! -z "$CRYPT" ]; then
+ if [ -e /sbin/cryptsetup.static ]; then
+ mkdir -p $SOURCE_TREE/sbin
+ cp /sbin/cryptsetup.static $SOURCE_TREE/sbin/cryptsetup.static
+ ( cd $SOURCE_TREE/sbin
+ ln -s cryptsetup.static cryptsetup 2>/dev/null
+ )
+ cat << EOF > $SOURCE_TREE/sbin/udevadm
+#!/bin/sh
+sleep 3
+EOF
+ chmod 0755 $SOURCE_TREE/sbin/udevadm
+
+ if [ -z "${MODULE_LIST}" ] ; then
+ MODULE_LIST="dm-mod"
+ elif ! echo ${MODULE_LIST} | grep -q dm-mod ; then
+ MODULE_LIST="$MODULE_LIST:dm-mod"
+ fi
+ # Write the underlying luks device to the initrd-tree:
+ echo $LUKSDEV > $SOURCE_TREE/luksdev
+ else
+ echo "Cryptsetup static binary is missing, CRYPT support isn't installed"
+ fi
+fi
+
+# Make module directory:
+if [ ! -d $SOURCE_TREE/lib/modules/$KERNEL_VERSION ]; then
+ mkdir -p $SOURCE_TREE/lib/modules/$KERNEL_VERSION
+fi
+
+# If a module list was given, copy the modules into place:
+if [ ! -z "$MODULE_LIST" ]; then
+ if grep -q "#insmod /lib/modules/2.6.18.8-smp/reiserfs.ko" $SOURCE_TREE/load_kernel_modules ; then
+ rm -f $SOURCE_TREE/load_kernel_modules
+ touch $SOURCE_TREE/load_kernel_modules
+ chmod 755 $SOURCE_TREE/load_kernel_modules
+ echo "# This is a script used to load the kernel modules." >> $SOURCE_TREE/load_kernel_modules
+ echo "# To use it, chmod it 755, and then add the insmod" >> $SOURCE_TREE/load_kernel_modules
+ echo "# lines needed to load your modules, like this:" >> $SOURCE_TREE/load_kernel_modules
+ echo >> $SOURCE_TREE/load_kernel_modules
+ fi
+
+ # Count number of modules
+ # This INDEX number gives us an easy way to find individual
+ # modules and their arguments, as well as tells us how many
+ # times to run through the list
+ if ! echo $MODULE_LIST | grep ':' > /dev/null ; then # only 1 module specified
+ INDEX=1
+ else
+ INDEX=1
+ while [ ! "$(echo "$MODULE_LIST" | cut -f $INDEX -d ':' )" = "" ]; do
+ INDEX=$(expr $INDEX + 1)
+ done
+ INDEX=$(expr $INDEX - 1) # Don't include the null value
+ fi
+
+# Wrap everything in a while loop
+i=0
+while [ $i -ne $INDEX ]; do
+ i=$(( $i + 1 ))
+
+ # FULL_MOD is the module plus any arguments (if any)
+ # MODULE is the module name
+ # ARGS is any optional arguments to be passed to the kernel
+ FULL_MOD="$(echo "$MODULE_LIST" | cut -d ':' -f $i)"
+ MODULE="$(echo "$FULL_MOD" | cut -d ' ' -f 1 )"
+ # Test for arguments
+ if echo "$FULL_MOD" | grep ' ' > /dev/null; then
+ ARGS=" $(echo "$FULL_MOD" | cut -d ' ' -f 2- )"
+ else
+ unset ARGS
+ fi
+
+ # Get MODULE deps and prepare insmod lines
+ /sbin/modprobe --set-version $KERNEL_VERSION --show-depends --ignore-install $MODULE 2> /dev/null \
+ | grep "^insmod " | cut -f 2 -d ' ' | while read SRCMOD; do
+
+ if ! grep -q "$SRCMOD" $SOURCE_TREE/load_kernel_modules 2>/dev/null ; then
+ LINE="$(echo "insmod -v $SRCMOD" | sed -e "s/$KERNEL_VERSION/\$(uname -r)/")"
+
+ # Test to see if arguments should be passed
+ # Over-ride the previously defined LINE variable if so
+ if [ "$(basename $SRCMOD .ko)" = "$MODULE" ]; then
+ # SRCMOD and MODULE are same, ARGS can be passed
+ LINE="$LINE$ARGS"
+ fi
+
+ fi
+
+ if ! grep -qx "$LINE" $SOURCE_TREE/load_kernel_modules ; then
+ echo "$LINE" >> $SOURCE_TREE/load_kernel_modules
+ fi
+
+ if cp -a --parents $SRCMOD $SOURCE_TREE 2> /dev/null; then
+ echo "OK: $SRCMOD added."
+ else
+ echo "WARNING: Could not find module \"$SRCMOD\""
+ fi
+
+ done
+
+done
+
+fi
+
+# And finally, build the initrd:
+build_initrd_image
+
diff --git a/source/a/mkinitrd/mkinitrd.8 b/source/a/mkinitrd/mkinitrd.8
new file mode 100644
index 00000000..5fa95721
--- /dev/null
+++ b/source/a/mkinitrd/mkinitrd.8
@@ -0,0 +1,194 @@
+.\" -*- nroff -*-
+.ds g \" empty
+.ds G \" empty
+.\" Like TP, but if specified indent is more than half
+.\" the current line-length - indent, use the default indent.
+.de Tp
+.ie \\n(.$=0:((0\\$1)*2u>(\\n(.lu-\\n(.iu)) .TP
+.el .TP "\\$1"
+..
+.TH MKINITRD 8 "04 March 2008" "Slackware Version 12.1"
+.SH NAME
+mkinitrd \- create or rebuilt an initrd (initial ramdisk) using initramfs (simple cpio+gzip).
+.SH SYNOPSIS
+.B mkinitrd
+[
+.B \-F
+]
+[
+.B \-c
+]
+[
+.B \-f filesystem
+]
+[
+.B \-h hibernate_partition
+]
+[
+.B \-k kernel_version
+]
+[
+.B \-m module1:module2:module3...
+]
+[
+.B \-o output_file
+]
+[
+.B \-r root_device
+]
+[
+.B \-s source_tree
+]
+[
+.B \-C crypt_device
+]
+[
+.B \-L
+]
+[
+.B \-R
+]
+[
+.B \-V
+]
+.SH DESCRIPTION
+.B mkinitrd
+is used to build an initial ramdisk. An initial ramdisk is a very small
+set of files that are loaded into RAM and "mounted" (as initramfs doesn't
+actually use a filesystem) as the kernel boots (before the main root
+filesystem is mounted). The usual reason to use an initrd is because
+you need to load kernel modules before mounting the root partition.
+Usually these modules are required to support the filesystem used by the
+root partition (ext3, reiserfs, xfs), or perhaps the controller that the
+hard drive is attached to (SCSI, RAID, etc). Essentially, there are so many
+different options available in modern Linux kernels that it isn't practical
+to try to ship many different kernels to try to cover everyone's needs.
+It's a lot more flexible to ship a generic kernel and a set of kernel
+modules for it.
+.SH OPTIONS
+.TP
+.B \-F
+Use the contents of /etc/mkinitrd.conf as options to mkinitrd (optional).
+If this is used in conjunction with any other options passed on the command
+line, the command-line options will override the config file options.
+.br
+See mkinitrd.conf(5) for details.
+.TP
+.B \-c
+Clear the existing initrd tree (by default in /boot/initrd-tree/) first.
+If this is not done, running mkinitrd will add additional modules to the
+existing initrd.
+.TP
+.B \-f filesystem
+Specify the filesystem to use for the root partition. If this isn't given,
+mount will usually figure it out. This option must be used together with the
+\-r option in order to be beneficial.
+.TP
+.B \--help
+Display a help summary.
+.TP
+.B \-h hibernate_partition
+Specify the swap partition holding the hibernation image.
+.TP
+.B \-k kernel version
+Use kernel modules from the specified kernel version. mkinitrd will look
+for them in /lib/modules/(kernel version).
+.TP
+.B \-l keymap
+Load an alternative keyboard mapping. All supported keyboard mappings
+can be found in /usr/share/mkinitrd/keymaps.tar.gz
+Leave the '.bmap' out when you supply this parameter. E.g. '-l nl' will
+add support for dutch keyboard mapping to the initrd.
+.TP
+.B \-m module list
+This is a list of colon-delimited modules to build into the initrd.
+Any dependencies of requested modules will also be added to the initrd.
+Additional options may be added to use when loading the kernel modules
+(but in this case the entire list must be wrapped with double quotes).
+.TP
+.B \-o output image
+The file to write the initrd to. (default: /boot/initrd.gz)
+.TP
+.B \-r root partition
+Specify the device to be used as the root partition. If this isn't given, the
+kernel default will be used (which is usually fine). This option must be used
+together with the \-f option in order to be beneficial.
+.TP
+.B \-s source tree
+The directory to use as the source for the initrd. (default: /boot/initrd-tree/)
+.TP
+.B \-w
+The -w option specifies how long to wait in seconds before assuming that all the
+drives are spun up and ready to go.
+.TP
+.B \-C
+Use cryptsetup to enable the underlying device of an encrypted root partition.
+Requires '-r' parameter. Two scenarios are possible.
+.br
+(1) root filesystem was created on the encrypted disk/LVM partition, example:
+
+ -C /dev/sda2 -r cryptroot
+
+where /dev/sda2 is the encrypted partition and the actual root device name in /etc/fstab is:
+
+ /dev/mapper/cryptroot
+
+(2) the encrypted partition contains a LVM volume which holds the root filesystem, example:
+
+ -C /dev/sda2 -r /dev/vg/root
+
+where /dev/sda2 is the encrypted partition and the actual root device name in /etc/fstab is:
+
+ /dev/vg/root
+.TP
+.B \-L
+This option adds LVM support to the initrd, if the tools are
+available on the system.
+.TP
+.B \-R
+This option adds RAID support to the initrd, if a static mdadm binary is
+available on the system.
+.TP
+.B \-V
+Display version information and exit.
+.SH EXAMPLES
+A simple example: Build an initrd for a reiserfs root partition:
+
+ mkinitrd -c -m reiserfs
+
+Another example: Build an initrd image using Linux 2.6.24.5 kernel
+modules for a system with an ext3 root partition on /dev/hdb3:
+
+ mkinitrd -c -k 2.6.24.5 -m ext3 -f ext3 -r /dev/hdb3
+
+If run without options, mkinitrd will rebuild an initrd image using
+the contents of the $SOURCE_TREE directory, or, if that directory
+does not exist it will be created and populated, and then mkinitrd
+will exit. These options are handy for building an initrd mostly
+by hand. After creating /boot/initrd-tree/, you can add modules and
+edit files by hand, and then rerun mkinitrd to create the initrd.
+
+Once the initrd is created, you'll need to tell your boot loader
+to load it. If you boot with LILO, you will need to add an initrd
+line to /etc/lilo.conf. Here's a section of lilo.conf that shows
+how to set this up:
+
+ # Linux bootable partition config begins
+ image = /boot/vmlinuz-generic-2.6.24.5
+ initrd = /boot/initrd.gz
+ root = /dev/hda6
+ label = Linux26245
+ read-only
+ # Linux bootable partition config ends
+
+Once you've created the initrd and editing /etc/lilo.conf, you will
+need to run 'lilo' to write out the changed boot block. The next
+time you reboot the initrd should be loaded along with the kernel.
+
+Have fun!
+
+.SH SEE ALSO
+mkinitrd.conf (5)
+
+.SH AUTHOR
+Patrick J. Volkerding <volkerdi@slackware.com>
diff --git a/source/a/mkinitrd/mkinitrd.SlackBuild b/source/a/mkinitrd/mkinitrd.SlackBuild
new file mode 100755
index 00000000..10e70b99
--- /dev/null
+++ b/source/a/mkinitrd/mkinitrd.SlackBuild
@@ -0,0 +1,119 @@
+#!/bin/sh
+
+# Copyright 2007, 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
+# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+VERSION=1.3.4
+BB=1.12.1
+ARCH=${ARCH:-x86_64}
+NUMJOBS=${NUMJOBS:--j7}
+BUILD=${BUILD:-3}
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-mkinitrd
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+cd $TMP
+rm -rf busybox-$BB
+tar xvf $CWD/busybox-$BB.tar.bz2 || exit 1
+cd busybox-$BB
+
+#zcat $CWD/busybox-${BB}.remove_warning.diff.gz | patch -p1 --verbose || exit 1
+#zcat $CWD/busybox-${BB}.no-gc-sections.diff.gz | patch -p1 --verbose || exit 1
+# Needed with 2.6.27 kernel:
+zcat $CWD/busybox-1.12.1_inotify.diff.gz | patch -p1 --verbose || exit 1
+
+chown -R root:root .
+sed -e \
+ 's#^CONFIG_PREFIX=.*#CONFIG_PREFIX="'$PKG'/usr/share/mkinitrd/initrd-tree"#' \
+ $CWD/busybox-dot-config > .config
+make oldconfig
+make $NUMJOBS || make || exit 1
+
+mkdir -p $PKG/usr/share/mkinitrd/initrd-tree/{bin,sbin}
+make install || exit 1
+rm -f $PKG/usr/share/mkinitrd/initrd-tree/linuxrc
+
+# Copying additional files:
+cp $CWD/mkinitrd_command_generator.sh $PKG/usr/share/mkinitrd
+chmod 755 $PKG/usr/share/mkinitrd/mkinitrd_command_generator.sh
+cp $CWD/keymaps.tar.gz $PKG/usr/share/mkinitrd
+
+# Zip up the initrd-tree:
+( cd $PKG/usr/share/mkinitrd/initrd-tree
+ tar xf $CWD/_initrd-tree.tar.gz
+ cat $CWD/init > init
+ tar czf ../initrd-tree.tar.gz .
+)
+rm -rf $PKG/usr/share/mkinitrd/initrd-tree
+
+# Add busybox docs:
+mkdir -p $PKG/usr/doc/busybox-$BB
+cp -a AUTHORS INSTALL LICENSE README \
+ $PKG/usr/doc/busybox-$BB
+
+mkdir -p $PKG/sbin
+cat $CWD/mkinitrd > $PKG/sbin/mkinitrd
+chmod 755 $PKG/sbin/mkinitrd
+
+mkdir -p $PKG/usr/man/man{5,8}
+cat $CWD/mkinitrd.8 | gzip -9c > $PKG/usr/man/man8/mkinitrd.8.gz
+cat $CWD/mkinitrd.conf.5 | gzip -9c > $PKG/usr/man/man5/mkinitrd.conf.5.gz
+
+mkdir -p $PKG/etc
+cat $CWD/mkinitrd.conf.sample > $PKG/etc/mkinitrd.conf.sample
+
+mkdir -p $PKG/usr/doc/mkinitrd-$VERSION
+cp -a $CWD/README.initrd $PKG/usr/doc/mkinitrd-$VERSION
+
+( cd $PKG/usr/doc/mkinitrd-$VERSION
+ DATE="$(date)"
+ KERNEL_VERSION="$(uname -r)"
+ PACKAGE_VERSION="$(uname -r | tr - _)"
+ LILO_KERNEL_NAME="$(echo $(uname -r) | tr -d . | tr -d - )"
+ cat README.initrd | sed -e s/@DATE@/"$DATE"/ > README.initrd1
+ cat README.initrd1 | sed -e s/@KERNEL_VERSION@/"$KERNEL_VERSION"/ > README.initrd2
+ cat README.initrd2 | sed -e s/@PACKAGE_VERSION@/"$PACKAGE_VERSION"/ > README.initrd3
+ cat README.initrd3 | sed -e s/@LILO_KERNEL_NAME@/"$LILO_KERNEL_NAME"/ > README.initrd4
+ cat README.initrd4 | sed -e s/@MKINITRD_VERSION@/"$VERSION"/ > README.initrd5
+ cat README.initrd5 | sed -e s/@ARCH@/"$ARCH"/ > README.initrd6
+ cat README.initrd6 | sed -e s/@BUILD@/"$BUILD"/ > README.initrd
+ rm -f README.initrd{1,2,3,4,5,6}
+)
+chmod 644 $PKG/usr/doc/mkinitrd-$VERSION/*
+chown root:root $PKG/usr/doc/mkinitrd-$VERSION/*
+
+mkdir $PKG/boot
+( cd $PKG/boot
+ ln -sf /usr/doc/mkinitrd-$VERSION/README.initrd .
+)
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" \
+ | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/mkinitrd-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/source/a/mkinitrd/mkinitrd.conf.5 b/source/a/mkinitrd/mkinitrd.conf.5
new file mode 100644
index 00000000..5890e246
--- /dev/null
+++ b/source/a/mkinitrd/mkinitrd.conf.5
@@ -0,0 +1,174 @@
+.\" mkinitrd.5 Robby Workman <rworkman@slackware.com>
+.\" 25 November 2007 "
+
+.TH MKINITRD.CONF 5 "05 Februrary 2008" "Slackware 12.1"
+.SH NAME
+.B mkinitrd.conf(5)
+.SH SYNOPSIS
+.B mkinitrd.conf - optional configuration file for
+.I mkinitrd(8)
+
+.SH DESCRIPTION
+The
+.I mkinitrd.conf
+file contains options to be passed to
+.I mkinitrd(8)
+on every run if mkinitrd is executed with the -F flag.
+.br
+It is intended as a fast and easy way for the system administrator to
+pass options to mkinitrd without having to type them on each execution.
+
+Options passed to
+.I mkinitrd(8)
+on the command line will override any
+values set in the config file.
+
+.SH OPTIONS AND SYNTAX
+
+All options are in the format of OPTION="value"
+.br
+Unset variables have no effect.
+
+.TP 5
+.I SOURCE_TREE
+This is the location for the initrd's source tree.
+.br
+Defaults to "/boot/initrd-tree"
+
+.TP 5
+.I CLEAR_TREE
+This option specifies whether to clear the initrd source tree prior to
+creating the initrd.
+.br
+This requires a value of either "0" or "1" where 0=no and 1=yes
+.br
+Examples:
+.br
+CLEAR_TREE="0" # Do not clear initrd tree first
+.br
+CLEAR_TREE="1" # Clear initrd tree first
+
+It is recommended to leave this unset and pass "-c" on the command line
+when clearing the tree is desired. Clearing the tree is not desirable
+if you wish to build support for more than one kernel into the initrd
+image.
+
+.TP 5
+.I OUTPUT_IMAGE
+This is the location for the initrd image that is created.
+.br
+Defaults to "/boot/initrd.gz"
+
+.TP 5
+.I KERNEL_VERSION
+This is the kernel version for which the initrd should be created.
+.br
+Defaults to "$(uname -r)"
+
+.TP 5
+.I KEYMAP
+This is the custom keyboard map that should be loaded instead of the
+default 'us' keymap.
+.br
+The file /usr/share/mkinitrd/keymaps.tar.gz contains all possible keymaps
+to choose from (omit the '.bmap' extension in the mkinitrd command)
+.br
+Example: KEYMAP="nl"
+
+.TP 5
+.I MODULE_LIST
+This should be a colon-separated list of modules you wish to be included
+in the initrd image.
+.br
+Example: MODULE_LIST="ext3:mbcache:jbd"
+
+If you have loadtime options that you need to specify when loading kernel
+modules, those can be added here as well.
+.br
+Example: MODULE_LIST="module1:module2 option=1:module3"
+
+.TP 5
+.I LUKSDEV
+When using cryptsetup with an encrypted root partition, use this variable to
+define the *actual* device name of the encrypted root partition and define the
+*mapped* device name as ROOTDEV.
+.br
+For example, if your actual root device name in /etc/fstab is:
+.br
+.I /dev/mapper/cryptroot
+on
+.I /dev/sda2
+
+Then you'll need to set:
+.br
+LUKSDEV="/dev/sda2"
+.br
+ROOTDEV="cryptroot"
+
+.TP 5
+.I ROOTDEV
+The device on which your root filesystem is located.
+.br
+Example: ROOTDEV="/dev/sda2"
+
+If you are using cryptsetup and an encrypted root filesystem, be sure to
+read the option above for LUKSDEV or Bad Things will happen.
+
+.TP 5
+.I ROOTFS
+The filesystem type of your root filesystem
+.br
+Example: ROOTFS="ext3"
+
+.TP 5
+.I RAID
+This option adds the mdadm binary to the initrd to support RAID.
+Additional modules may be required, depending on your kernel
+configuration. If you wish to add LVM support to the initrd, then
+set this to 1; otherwise, leave it unset or set it to 0.
+.br
+Examples:
+.br
+RAID="0" # Do not add RAID support to initrd
+.br
+RAID="1" # Add RAID support to initrd
+
+.TP 5
+.I LVM
+This option adds support for LVM partitions into the initrd.
+If you wish to add LVM support to the initrd, then set this to 1;
+otherwise, leave it unset or set it to 0.
+.br
+Examples:
+.br
+LVM="0" # Do not add LVM support to initrd
+.br
+LVM="1" # Add LVM support to initrd
+
+.TP 5
+.I WAIT
+This defines the time to wait, in seconds, until all disks are detected.
+.br
+This is useful for allowing extra time that might be needed for slow usb disks or systems with large amounts of storage to become ready.
+.br
+If not defined, the default is 1 second.
+
+.TP 5
+.I RESUMEDEV
+The swap partition holding your hibernation image.
+.br
+Example: RESUMEDEV="/dev/sda2"
+
+.SH FILES
+.I /etc/mkinitrd.conf
+.br
+See /etc/mkinitrd.conf.sample
+
+.SH "SEE ALSO"
+.BR mkinitrd "(8)"
+
+.SH BUGS
+None known :-)
+
+.SH MISCELLANEOUS
+Support for mkinitrd.conf was added in mkinitrd-1.3.0
diff --git a/source/a/mkinitrd/mkinitrd.conf.sample b/source/a/mkinitrd/mkinitrd.conf.sample
new file mode 100644
index 00000000..29e56f5f
--- /dev/null
+++ b/source/a/mkinitrd/mkinitrd.conf.sample
@@ -0,0 +1,16 @@
+# mkinitrd.conf.sample
+# See "man mkinitrd.conf" for details on the syntax of this file
+#
+#SOURCE_TREE="/boot/initrd-tree"
+#CLEAR_TREE="0"
+#OUTPUT_IMAGE="/boot/initrd.gz"
+#KERNEL_VERSION="$(uname -r)"
+#KEYMAP="us"
+#MODULE_LIST="ext3"
+#LUKSDEV="/dev/hda1"
+#ROOTDEV="/dev/hda1"
+#ROOTFS="ext3"
+#RESUMEDEV="/dev/hda2"
+#RAID="0"
+#LVM="0"
+#WAIT="1"
diff --git a/source/a/mkinitrd/mkinitrd_command_generator.sh b/source/a/mkinitrd/mkinitrd_command_generator.sh
new file mode 100644
index 00000000..d3cdfb73
--- /dev/null
+++ b/source/a/mkinitrd/mkinitrd_command_generator.sh
@@ -0,0 +1,842 @@
+#!/bin/sh
+# $Id: mkinitrd_command_generator.sh,v 1.40 2008/12/18 23:32:56 eha Exp eha $
+# Copyright 2008, 2009 by Eric Hameleers <alien@slackware.com>, Eindhoven, Netherlands
+# Copyright 2008, 2009 by PiterPUNK <piterpunk@slackware.com>, Sao Paulo, SP, Brazil
+# All rights reserved.
+#
+# Permission to use, copy, modify, and distribute this software for
+# any purpose with or without fee is hereby granted, provided that
+# the above copyright notice and this permission notice appear in all
+# copies.
+#
+# THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESSED OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+# IN NO EVENT SHALL THE AUTHORS AND COPYRIGHT HOLDERS AND THEIR
+# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+# USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+# ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+# OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+# OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+# SUCH DAMAGE.
+# -----------------------------------------------------------------------------
+#
+# Create an initrd which fits the system.
+# Take into account the use of LVM/LUKS/RAID.
+# Find out about any hardware drivers the system may need in an initrd when
+# booting from a generic lightweight kernel.
+#
+# -----------------------------------------------------------------------------
+
+# The script's revision number will be displayed in the help text:
+REV=$( echo "$Revision: 1.40 $" | cut -d' ' -f2 )
+
+# Define some essential parameter values:
+USING_LVM=""
+USING_LUKS=""
+USING_RAID=""
+MLIST=""
+REALDEV="" # The device that contains the LUKS volume
+BASEDEV="" # Lowest level device (raw block device or RAID volume)
+
+FSTAB=${FSTAB:-"/etc/fstab"} # so we can test with alternate fstab files
+
+# These are needed by -c and -i options:
+SOURCE_TREE=${SOURCE_TREE:-"/boot/initrd-tree"}
+CLEAR_TREE=${CLEAR_TREE:-1}
+KEYMAP=${KEYMAP:-"us"}
+WAIT=${WAIT:-1}
+
+# A basic explanation of the commandline parameters:
+basic_usage() {
+ cat <<-EOT
+
+ *** $(basename $0) revision $REV ***
+ Usage:
+ $(basename $0) [ options ] [ kernel_filename ]
+ Options:
+ -a <"additional params"> Additional parameters to pass to mkinitrd.
+ -c | --conf Show a suitable mkinitrd configuration file.
+ -h | --help Show this help.
+ -i | --interactive Navigate through menus instead of using
+ commandline arguments.
+ --longhelp Show more detailed information/examples.
+ -k <kernelversion> Use specific kernel version.
+ -m <"additional mods"> Additional modules to pass to mkinitrd,
+ separated by colons (:).
+ -l | --lilo Only show lilo.conf section
+ (requires a kernel_filename).
+ -r | --run Only show 'mkinitrd' command.
+ EOT
+}
+
+# More of a tutorial here:
+extended_usage() {
+ cat <<-EOT
+
+ This script is useful in situations where you require an initrd image
+ to boot your computer.
+ For instance, when booting a kernel that does not have support for your
+ storage or root filesystem built in (such as the Slackware 'generic'
+ kernels').
+
+ * When you run the script without parameters, it will examine your
+ running system, your current kernel version and will output an example
+ of a 'mkinitrd' commandline that you can use to generate an initrd
+ image containing enough driver support to boot the computer.
+
+ * You can make it more specific: when you add the filename of a kernel
+ as parameter to the script, it will determine the kernel version from
+ that kernel, and also give an example of the lines that you should add
+ to your '/etc/lilo.conf' file.
+
+ * If you want your initrd image to have a custom name instead of the
+ default '/boot/initrd.gz' you can add it as another parameter to the
+ script, as follows:
+
+ $(basename $0) -a "-o /boot/custom.gz"
+
+ The arguments to the '-a' parameter will be used as additional arguments
+ to the 'mkinitrd' command.
+
+ * If you need additional modules in the initrd image, apart from what
+ the script determines, you can pass then to the script using the '-m'
+ parameter as follows:
+
+ $(basename $0) -m "uhci-hcd:usbhid"
+
+ The above example adds support for USB keyboards to the initrd - you
+ may need that if you have encrypted your root partition and need to
+ enter a passphrase using a USB keyboard.
+
+ * Instead of copying and pasting the script's output, you can create
+ an initrd by directly executing the output, like in this example:
+
+ EOT
+
+ echo " \$($(basename $0) --run /boot/vmlinuz-generic-smp-2.6.24.5-smp)"
+
+ cat <<-EOT
+
+ That used the '-r' or '--run' switch to make the script only write
+ the 'mkinitrd' commandline to the terminal.
+
+ * When you want to add a section for a specific kernel to
+ '/etc/lilo.conf' directly, use the '-l' or '--lilo' switch and use a
+ command like in this example:
+
+ EOT
+
+ echo " $(basename $0) --lilo /boot/vmlinuz-generic-smp-2.6.24.5-smp >>/etc/lilo.conf"
+
+ cat <<-EOT
+
+ That command will result in the following lines being added to your
+ '/etc/lilo.conf' file (example for my hardware):
+
+ # Linux bootable partition config begins
+ # initrd created with 'mkinitrd -c -k 2.6.24.5-smp -m ata_generic:pata_amd:mbcache:jbd:ext3 -f ext3 -r /dev/hda7'
+ image = /boot/vmlinuz-generic-smp-2.6.24.5-smp
+ initrd = /boot/initrd.gz
+ root = /dev/hda7
+ label = 2.6.24.5-smp
+ read-only
+ # Linux bootable partition config ends
+
+ The last two examples show how easy it is to configure your computer
+ for the use of an initrd if you need one. The only thing left to do
+ afterwards is running 'lilo'.
+
+ EOT
+}
+
+# Find the device that holds the root partition:
+get_root_device() {
+ if [ -e $FSTAB ]; then
+ RD=$(cat $FSTAB | tr '\t' ' ' | tr -s ' ' | grep ' / ' | cut -f1 -d' ')
+ if [ "$(echo $RD | cut -f1 -d=)" = "LABEL" -o "$(echo $RD | cut -f1 -d=)" = "UUID" ]; then
+ DKEY=$(echo $RD | cut -f1 -d=)
+ # The value can be LABEL=foo or LABEL='foo' or LABEL="foo"
+ DVAL=$(echo $RD | cut -f2 -d= | tr -d "'\042")
+ RD=$(/sbin/blkid | grep -w $DKEY | grep -w $DVAL | cut -f1 -d:)
+ fi
+ else
+ RD=$(grep -m1 "^/dev/.*[[:blank:]]/[[:blank:]]" /proc/mounts | cut -f1 -d' ')
+ fi
+ echo $RD
+}
+
+# Get the root fs information:
+get_rootfs_type() {
+ if $(type vol_id 1>/dev/null 2>&1) ; then
+ vol_id $ROOTDEV | grep ID_FS_TYPE | cut -f2 -d=
+ else
+ # Alternatively, use:
+ cat $FSTAB | tr '\t' ' ' | tr -s ' ' | grep ' / ' | cut -f3 -d' '
+ fi
+}
+
+# Add the module(s) needed for the root filesystem:
+add_rootfs_module() {
+ local FSMOD
+ FSMOD=$(/sbin/modprobe --set-version $KVER --show-depends ${ROOTFS} 2>/dev/null | while read LINE; do
+ echo $(basename $(echo $LINE | cut -d' ' -f2) .ko )
+ done)
+ if [ -n "$FSMOD" ]; then
+ [ -n "$MLIST" ] && echo "$MLIST:$(echo $FSMOD | tr ' ' ':')" \
+ || echo $FSMOD | tr ' ' ':'
+ fi
+}
+
+# Determine the list of kernel modules needed to support the root device:
+determine_blockdev_drivers() {
+ # Walk the /sys tree to find kernel modules that are
+ # required for our storage devices.
+ # Thanks to PiterPUNK for this piece of code.
+ local MLIST
+ MLIST=$(for i in $(find /sys/block -name "device" -exec ls -l {} \; | sed -ne 's:.*/\(devices.*\)/[a-zA-Z]\+[.0-9]\+/.*:/sys/\1:p' | sort -u); do
+ for j in $(find $i -name "modalias"); do
+ /sbin/modprobe --set-version $KVER --show-depends $(cat $j) 2>/dev/null | while read LINE ; do
+ echo $(basename $(echo $LINE | cut -d' ' -f2) .ko )
+ done
+ done
+ done)
+ MLIST=$( echo $MLIST | tr ' ' ':' )
+ echo $MLIST
+}
+
+# Search for USB keyboards:
+function add_usb_keyboard() {
+ local USBMOD
+ if cat /proc/bus/input/devices | sed -e 's/^$/\$/g' | \
+ tr "\n$" " \n" | grep -q " Phys=.*usb.* .*Handlers=.*kbd.*B:"; then
+ USBMOD="usbhid"
+ [ -n "$MLIST" ] && MLIST="$MLIST:$USBMOD" \
+ || MLIST="$USBMOD"
+ fi
+ echo $MLIST
+}
+
+# Determine what USB Host Controller is in use
+function add_usb_hcd() {
+ local USBMOD
+ for i in `ls -Ld /sys/module/*_hcd/drivers/*`; do
+ if ls -L $i | grep -q "[0-9a-f]*:" ; then
+ USBMOD=$( echo $i | cut -f4 -d/ | tr "_" "-")
+ [ -n "$MLIST" ] && MLIST="$MLIST:$USBMOD" \
+ || MLIST="$USBMOD"
+ fi
+ done
+ echo $MLIST
+}
+
+# Is the root partition on a (combination of) LVM/LUKS volume?
+check_luks_lvm_raid() {
+ if $( lvdisplay -c $ROOTDEV 1>/dev/null 2>/dev/null ); then
+ # Our root partition is on a LV:
+ USING_LVM=1
+ # Search the Physical Volume of our Logical Volume:
+ MYVG=$( echo $(lvdisplay -c $ROOTDEV) | cut -d: -f2 )
+ for LINE in $(pvdisplay -c) ; do
+ VG=$(echo $LINE | cut -d: -f2)
+ [ "$VG" = "$MYVG" ] && break
+ done
+ PV=$(echo $LINE | cut -d: -f1)
+ # Check if there is a LUKS device underneath:
+ if $( cryptsetup status $PV 1>/dev/null 2>/dev/null ) ; then
+ # Our root partition's LV is on a LUKS volume:
+ USING_LUKS=1
+ REALDEV=$( cryptsetup status $PV | grep 'device: ' | tr -d ' ' | cut -d: -f2 )
+ BASEDEV=$REALDEV
+ else
+ BASEDEV=$PV
+ fi
+ elif $( cryptsetup status $ROOTDEV 1>/dev/null 2>/dev/null ) ; then
+ # Our root device is on a LUKS volume:
+ USING_LUKS=1
+ REALDEV=$( cryptsetup status $ROOTDEV | grep 'device: ' | tr -d ' ' | cut -d: -f2 )
+ ROOTDEV=$(basename $ROOTDEV)
+ # Check for LVM:
+ for LV in $(lvdisplay -c | tr -d ' ' | cut -f1 -d:) ; do
+ # Note: cryptsetup shows the real device, whereas
+ # lvdisplay requires the /dev/<myvg>/... symlink to the real device.
+ if [ "$(readlink $LV)" = "$REALDEV" ]; then
+ REALDEV=$LV
+ break
+ fi
+ done
+ if $( lvdisplay -c $REALDEV 1>/dev/null 2>/dev/null ); then
+ # Our root partition's LUKS device is on a LV:
+ USING_LVM=1
+ # Search the Physical Volume of our Logical Volume:
+ MYVG=$( echo $(lvdisplay -c $REALDEV) | cut -d: -f2 )
+ for LINE in $(pvdisplay -c) ; do
+ VG=$(echo $LINE | cut -d: -f2)
+ [ "$VG" = "$MYVG" ] && break
+ done
+ PV=$(echo $LINE | cut -d: -f1)
+ BASEDEV=$PV
+ else
+ BASEDEV=$REALDEV
+ fi
+ else
+ BASEDEV=$ROOTDEV
+ fi
+
+ # Finally, we should check if base device is
+ # a real block device or a RAID volume:
+ for MD in $(cat /proc/mdstat | grep -w active | cut -d' ' -f1) ; do
+ if [ "$BASEDEV" = "/dev/$MD" ]; then
+ USING_RAID=1
+ break
+ fi
+ done
+}
+
+# Before we start
+[ -x /bin/id ] && CMD_ID="/bin/id" || CMD_ID="/usr/bin/id"
+if [ "$($CMD_ID -u)" != "0" ]; then
+ echo "You need to be root to run $(basename $0)."
+ exit 1
+fi
+
+# Parse the commandline parameters:
+while [ ! -z "$1" ]; do
+ case $1 in
+ --longhelp)
+ basic_usage
+ extended_usage
+ exit 0
+ ;;
+ -a)
+ MKINIT_PARAMS=$2
+ shift 2
+ ;;
+ -c|--conf)
+ [ -n "$EMIT" ] && { echo "Do not mix incompatible parameters!"; exit 1; }
+ EMIT="conf"
+ shift
+ ;;
+ -h|--help)
+ basic_usage
+ exit 0
+ ;;
+ -i|--interactive)
+ INTERACTIVE=1
+ shift
+ ;;
+ -k)
+ KVER=$2
+ shift 2
+ ;;
+ -m)
+ MKINIT_MODS=$2
+ shift 2
+ ;;
+ -l|--lilo)
+ [ -n "$EMIT" ] && { echo "Do not mix incompatible parameters!"; exit 1; }
+ EMIT="lilo"
+ shift
+ ;;
+ -L|--fromlilo)
+ FROMLILO=1
+ shift
+ ;;
+ -r|--run)
+ [ -n "$EMIT" ] && { echo "Do not mix incompatible parameters!"; exit 1; }
+ EMIT="run"
+ shift
+ ;;
+ -R|--rootdev)
+ ROOTDEV=$2
+ shift 2
+ ;;
+ -*)
+ echo "Unsupported parameter '$1'!"
+ exit 1
+ ;;
+ *) # Everything else but switches (which start with '-') follows:
+ if [ -f $1 ]; then
+ KFILE=$1
+ # Construction of KFILE's full filename:
+ KFILEPATH=$(cd $(dirname $KFILE) && pwd)
+ if [ -L $KFILE ]; then
+ KFILE=$(readlink $KFILE)
+ else
+ KFILE=$(basename $KFILE)
+ fi
+ KFILE=${KFILEPATH}/$KFILE
+ if [ -z "$(file $KFILE | grep 'Linux kernel x86 boot')" ]; then
+ echo "File '$KFILE' does not look like it is a kernel file!"
+ exit 1
+ fi
+ else
+ echo "File $1 not found!"
+ exit 1
+ fi
+ shift
+ ;;
+ esac
+done
+
+# Determine what to show as output (other options may have set EMIT already)
+EMIT=${EMIT:-"all"}
+
+# An EMIT value of 'lilo' requires a kernel filename as script parameter:
+if [ "$EMIT" = "lilo" ]; then
+ if [ -z "$KFILE" ]; then
+ echo "A kernel_filename is required with the '-l|--lilo' option!"
+ exit 1
+ fi
+fi
+
+# Determine kernel version to use,
+# and check if modules for this kernel are actually present:
+if [ -z "$KVER" ]; then
+ if [ -n "$KFILE" ]; then
+ KVER="$(strings $KFILE | grep '(.*@.*) #' | cut -f1 -d' ')"
+ else
+ KVER="$(uname -r)"
+ fi
+fi
+if [ ! -d /lib/modules/$KVER ]; then
+ echo "Modules for kernel $KVER aren't installed."
+ exit 1
+fi
+
+# Determine whether the user passed an alternate filename for the initrd:
+if [ -n "$MKINIT_PARAMS" ]; then
+ SRCHLIST="$MKINIT_PARAMS"
+ for ELEM in $MKINIT_PARAMS ; do
+ SRCHLIST=$(echo $SRCHLIST | cut -d' ' -f2-) # cut ELEM from the list
+ if [ "$ELEM" = "-o" ]; then
+ IMGFILE=$(echo $SRCHLIST | cut -d' ' -f1)
+ break
+ fi
+ done
+fi
+IMGFILE=${IMGFILE:-"/boot/initrd.gz"}
+
+# Get information about the root device / root filesystem:
+ROOTDEV=${ROOTDEV:-$(get_root_device)}
+ROOTFS=$(get_rootfs_type)
+
+# Determine the list of kernel modules needed to support the root device:
+MLIST=$(determine_blockdev_drivers)
+
+# Determine if a USB keyboard is in use and include usbhid to module list
+MLIST=$(add_usb_keyboard)
+
+# If we use any USB module, try to determine the Host Controller
+if echo $MLIST | grep -q "usb"; then
+ MLIST=$(add_usb_hcd)
+fi
+
+# Check what combination of LUKS/LVM/RAID we have to support:
+# This sets values for USING_LUKS, USING_LVM, USING_RAID, REALDEV and BASEDEV.
+check_luks_lvm_raid
+
+# This is the interactive part:
+if [ "$INTERACTIVE" = "1" ]; then
+ if [ "$FROMLILO" != "1" ]; then
+ dialog --stdout --title "WELCOME TO MKINITRD COMMAND GENERATOR" --msgbox "\
+The main goal of this utility is to create a good initrd to \
+fit your needs. It can detect what kernel you are running, \
+what is your root device, root filesystem, if you use encryption, \
+LVM, RAID, etc. \
+\n\n\
+Usually the probed values are OK and they will be the \
+defaults in all subsequent dialogs, but maybe you want \
+to change something. \n\
+If in doubt, leave the defaults." 0 0
+
+ KVER=$( ls -d1 --indicator-style=none /lib/modules/* | \
+ awk -F/ -vVER=$KVER '{
+ if ( VER == $NF ) {
+ ONOFF="on"
+ } else {
+ ONOFF="off"
+ } ; printf("%s \"\" %s\n",$NF,ONOFF) }' | \
+ xargs dialog --stdout --title "CHOOSE KERNEL VERSION" \
+ --default-item $KVER --radiolist "\
+Please, select the kernel version you want to create this initrd for." 0 0 4 )
+ [ -z "$KVER" ] && exit 1
+
+ OLDROOTDEV=$ROOTDEV
+ ROOTDEV=$( dialog --stdout --title "SELECT ROOT DEVICE" --inputbox "\
+Enter your root device. Root device is the one where your '/' filesystem \
+is mounted." 0 0 "$ROOTDEV" )
+ [ -z "$ROOTDEV" ] && exit 1
+
+ # We need to re-check our defaults in case the user changed the default
+ # value for ROOTDEV:
+ [ "$OLDROOTDEV" != "$ROOTDEV" ] && check_luks_lvm_raid
+ ROOTFS=$(get_rootfs_type)
+
+ ROOTFS=$( dialog --stdout --title "SELECT ROOT FILESYSTEM" --inputbox "\
+Enter the type of your root filesystem." 0 0 "$ROOTFS" )
+ [ -z "$ROOTFS" ] && exit 1
+ fi
+
+ MLIST=$(add_rootfs_module)
+
+ LLR=$( dialog --stdout --title "LVM/LUKS/RAID" --checklist "\
+Do you use some of those in your root filesystem? \
+If this is the case, please select one or more options." 12 45 3 \
+"LVM" "Logical Volume Manager" $([ "$USING_LVM" = "1" ] && echo on || echo off) \
+"LUKS" "Linux Unified Key Setup" $([ "$USING_LUKS" = "1" ] && echo on || echo off) \
+"RAID" "Linux Software RAID" $([ "$USING_RAID" = "1" ] && echo on || echo off))
+
+ if [ "$?" != "0" ]; then
+ exit 1
+ fi
+
+ echo $LLR | grep -q LUKS && USING_LUKS="1"
+ echo $LLR | grep -q LVM && USING_LVM="1"
+ echo $LLR | grep -q RAID && USING_RAID="1"
+
+ if [ "$USING_LUKS" = "1" ]; then
+ REALDEV=$( dialog --stdout --title "LUKS ROOT DEVICE" --inputbox "\
+Please, enter your LUKS root device:" 0 0 "$REALDEV" )
+ [ -z "$REALDEV" ] && exit 1
+ fi
+fi
+
+# Step out of the interactive loop for a moment. The next block needs to be
+# executed in all cases.
+
+# We need to 'undouble' the MLIST array. Some people report that walking the
+# /sys tree produces duplicate modules in the list.
+# The awk command elimitates doubles without changing the order:
+MLIST=$( echo $MLIST | tr ':' '\n' | awk '!x[$0]++' | tr '\n' ' ' )
+MLIST=$( echo $MLIST | tr ' ' ':' )
+MLIST=$(echo ${MLIST%:}) # To weed out a trailing ':' which was reported once.
+
+# Back to the interactive part:
+
+if [ "$INTERACTIVE" = "1" ]; then
+ MLIST=$( dialog --stdout --title "INITRD'S MODULE LIST" --inputbox "\
+The list here shows all modules needed to support your root filesystem \
+and boot from it. But you can change the list to use some alternative \
+or additional modules. If you don't know what to do, the default is safe." \
+0 0 "$MLIST" )
+ if [ "$?" != "0" ]; then
+ exit 1
+ fi
+
+ EXTRA=$( dialog --stdout --title "EXTRA CONFIGURATION" --checklist "\
+Now is your chance for some additional configuration. All of these \
+configurations are optional and you can stick to the defaults." 11 72 3 \
+"KEYMAP" "Select keyboard layout (default: US)" \
+ $([ $USING_LUKS = 1 ] && echo on || echo off) \
+"RESUMEDEV" "Select device for 'suspend-to-disk' feature" off \
+"WAIT" "Add delay to allow detection of slow disks at boot" off)
+ if [ "$?" != "0" ]; then
+ exit 1
+ fi
+
+ if echo $EXTRA | grep -q KEYMAP ; then
+ KEYMAP=$( dialog --stdout --title "KEYBOARD LAYOUT SELECTION" \
+ --cancel-label "Skip" \
+ --menu "You may select one of the following keyboard layouts. \
+If you do not select a keyboard map, 'us.map' \
+(the US keyboard layout) is the default. Use the UP/DOWN \
+arrow keys and PageUp/PageDown to scroll \
+through the whole list of choices." \
+22 55 11 \
+"qwerty/us.map" "" \
+"azerty/azerty.map" "" \
+"azerty/be-latin1.map" "" \
+"azerty/fr-latin0.map" "" \
+"azerty/fr-latin1.map" "" \
+"azerty/fr-latin9.map" "" \
+"azerty/fr-old.map" "" \
+"azerty/fr-pc.map" "" \
+"azerty/fr.map" "" \
+"azerty/wangbe.map" "" \
+"azerty/wangbe2.map" "" \
+"dvorak/ANSI-dvorak.map" "" \
+"dvorak/dvorak-l.map" "" \
+"dvorak/dvorak-r.map" "" \
+"dvorak/dvorak.map" "" \
+"dvorak/no-dvorak.map" "" \
+"fgGIod/tr_f-latin5.map" "" \
+"fgGIod/trf-fgGIod.map" "" \
+"olpc/es-olpc.map" "" \
+"olpc/pt-olpc.map" "" \
+"qwerty/bg-cp1251.map" "" \
+"qwerty/bg-cp855.map" "" \
+"qwerty/bg_bds-cp1251.map" "" \
+"qwerty/bg_bds-utf8.map" "" \
+"qwerty/bg_pho-cp1251.map" "" \
+"qwerty/bg_pho-utf8.map" "" \
+"qwerty/br-abnt.map" "" \
+"qwerty/br-abnt2.map" "" \
+"qwerty/br-latin1-abnt2.map" "" \
+"qwerty/br-latin1-us.map" "" \
+"qwerty/by-cp1251.map" "" \
+"qwerty/by.map" "" \
+"qwerty/bywin-cp1251.map" "" \
+"qwerty/cf.map" "" \
+"qwerty/cz-cp1250.map" "" \
+"qwerty/cz-lat2-prog.map" "" \
+"qwerty/cz-lat2.map" "" \
+"qwerty/cz-qwerty.map" "" \
+"qwerty/defkeymap.map" "" \
+"qwerty/defkeymap_V1.0.map" "" \
+"qwerty/dk-latin1.map" "" \
+"qwerty/dk.map" "" \
+"qwerty/emacs.map" "" \
+"qwerty/emacs2.map" "" \
+"qwerty/es-cp850.map" "" \
+"qwerty/es.map" "" \
+"qwerty/et-nodeadkeys.map" "" \
+"qwerty/et.map" "" \
+"qwerty/fi-latin1.map" "" \
+"qwerty/fi-latin9.map" "" \
+"qwerty/fi-old.map" "" \
+"qwerty/fi.map" "" \
+"qwerty/gr-pc.map" "" \
+"qwerty/gr.map" "" \
+"qwerty/hu101.map" "" \
+"qwerty/il-heb.map" "" \
+"qwerty/il-phonetic.map" "" \
+"qwerty/il.map" "" \
+"qwerty/is-latin1-us.map" "" \
+"qwerty/is-latin1.map" "" \
+"qwerty/it-ibm.map" "" \
+"qwerty/it.map" "" \
+"qwerty/it2.map" "" \
+"qwerty/jp106.map" "" \
+"qwerty/kazakh.map" "" \
+"qwerty/kyrgyz.map" "" \
+"qwerty/la-latin1.map" "" \
+"qwerty/lt.baltic.map" "" \
+"qwerty/lt.l4.map" "" \
+"qwerty/lt.map" "" \
+"qwerty/mk-cp1251.map" "" \
+"qwerty/mk-utf.map" "" \
+"qwerty/mk.map" "" \
+"qwerty/mk0.map" "" \
+"qwerty/nl.map" "" \
+"qwerty/nl2.map" "" \
+"qwerty/no-latin1.map" "" \
+"qwerty/no.map" "" \
+"qwerty/pc110.map" "" \
+"qwerty/pl.map" "" \
+"qwerty/pl1.map" "" \
+"qwerty/pl2.map" "" \
+"qwerty/pl3.map" "" \
+"qwerty/pl4.map" "" \
+"qwerty/pt-latin1.map" "" \
+"qwerty/pt-latin9.map" "" \
+"qwerty/pt.map" "" \
+"qwerty/ro.map" "" \
+"qwerty/ro_std.map" "" \
+"qwerty/ru-cp1251.map" "" \
+"qwerty/ru-ms.map" "" \
+"qwerty/ru-yawerty.map" "" \
+"qwerty/ru.map" "" \
+"qwerty/ru1.map" "" \
+"qwerty/ru2.map" "" \
+"qwerty/ru3.map" "" \
+"qwerty/ru4.map" "" \
+"qwerty/ru_win.map" "" \
+"qwerty/ruwin_alt-CP1251.map" "" \
+"qwerty/ruwin_alt-KOI8-R.map" "" \
+"qwerty/ruwin_alt-UTF-8.map" "" \
+"qwerty/ruwin_cplk-CP1251.map" "" \
+"qwerty/ruwin_cplk-KOI8-R.map" "" \
+"qwerty/ruwin_cplk-UTF-8.map" "" \
+"qwerty/ruwin_ct_sh-CP1251.map" "" \
+"qwerty/ruwin_ct_sh-KOI8-R.map" "" \
+"qwerty/ruwin_ct_sh-UTF-8.map" "" \
+"qwerty/ruwin_ctrl-CP1251.map" "" \
+"qwerty/ruwin_ctrl-KOI8-R.map" "" \
+"qwerty/ruwin_ctrl-UTF-8.map" "" \
+"qwerty/se-fi-ir209.map" "" \
+"qwerty/se-fi-lat6.map" "" \
+"qwerty/se-ir209.map" "" \
+"qwerty/se-lat6.map" "" \
+"qwerty/se-latin1.map" "" \
+"qwerty/sk-prog-qwerty.map" "" \
+"qwerty/sk-qwerty.map" "" \
+"qwerty/speakup-jfw.map" "" \
+"qwerty/speakupmap.map" "" \
+"qwerty/sr-cy.map" "" \
+"qwerty/sv-latin1.map" "" \
+"qwerty/tr_q-latin5.map" "" \
+"qwerty/tralt.map" "" \
+"qwerty/trf.map" "" \
+"qwerty/trq.map" "" \
+"qwerty/ttwin_alt-UTF-8.map.gz" "" \
+"qwerty/ttwin_cplk-UTF-8.map.gz" "" \
+"qwerty/ttwin_ct_sh-UTF-8.map.gz" "" \
+"qwerty/ttwin_ctrl-UTF-8.map.gz" "" \
+"qwerty/ua-cp1251.map.gz" "" \
+"qwerty/ua-utf-ws.map" "" \
+"qwerty/ua-utf.map" "" \
+"qwerty/ua-ws.map" "" \
+"qwerty/ua.map" "" \
+"qwerty/uk.map" "" \
+"qwerty/us-acentos.map" "" \
+"qwerty/us.map" "" \
+"qwertz/croat.map" "" \
+"qwertz/cz-us-qwertz.map" "" \
+"qwertz/cz.map" "" \
+"qwertz/de-latin1-nodeadkeys.map" "" \
+"qwertz/de-latin1.map" "" \
+"qwertz/de.map" "" \
+"qwertz/de_CH-latin1.map" "" \
+"qwertz/fr_CH-latin1.map" "" \
+"qwertz/fr_CH.map" "" \
+"qwertz/hu.map" "" \
+"qwertz/sg-latin1-lk450.map" "" \
+"qwertz/sg-latin1.map" "" \
+"qwertz/sg.map" "" \
+"qwertz/sk-prog-qwertz.map" "" \
+"qwertz/sk-qwertz.map" "" \
+"qwertz/slovene.map" "" )
+ [ -n "$KEYMAP" ] && KEYMAP=$(basename $KEYMAP .map)
+ fi
+
+ if echo $EXTRA | grep -q RESUMEDEV ; then
+ # Print information about swap partitions:
+ FREERAM=$(free -k | grep "^Mem:" | tr -s ' ' | cut -d' ' -f2)
+ SWPINFO=""
+ for SWPDEV in $(grep -w swap $FSTAB | cut -d' ' -f1) ; do
+ SWPINFO="$SWPINFO $SWPDEV Linux swap partition $(fdisk -s $SWPDEV) KB \\n"
+ [ $(fdisk -s $SWPDEV) -gt $FREERAM ] && RESUMEDEV=$SWPDEV
+ done
+ FREERAM=$(free -m | grep "^Mem:" | tr -s ' ' | cut -d' ' -f2)
+ RESUMEDEV=$( dialog --stdout --no-collapse --title "HIBERNATE RESUME DEVICE" --inputbox "\
+When using suspend-to-disk feature (hibernate), your computer's RAM is copied \
+to a swap device when it shuts down. The kernel will resume from that RAM \
+image at boot. This means that the swap partition must not be smaller than \
+the amount of RAM you have ($FREERAM MB). \n\
+$SWPINFO \n\
+Please specify a swap partition to be used for hibernation:" \
+0 0 "$RESUMEDEV")
+ [ -z "$RESUMEDEV" ] && exit 1
+ fi
+
+ if echo $EXTRA | grep -q WAIT ; then
+ WAIT=$( dialog --stdout --title "WAIT FOR ROOT DEVICE" --inputbox "\
+Some block devices are too slow to be detected properly at boot. USB storage \
+devices and some disk arrays have this 'feature'. To make your machine \
+boot properly, you can add some delay here, to wait until all your disks are \
+probed and detected. The time is in seconds:" 0 0 "$WAIT")
+ [ -z "$WAIT" ] && exit 1
+ fi
+
+ IMGFILE=$( dialog --stdout --title "INITRD IMAGE NAME" --inputbox "\
+Enter your initrd image filename." 0 0 "$IMGFILE" )
+ [ -z "$IMGFILE" ] && exit 1
+
+else
+ MLIST=$(add_rootfs_module)
+fi
+
+# Add any modules passed along on the commandline:
+if [ -n "$MKINIT_MODS" ]; then
+ [ -n "$MLIST" ] && MLIST="$MLIST:$(echo $MKINIT_MODS | tr ' ' ':')" \
+ || MLIST="$(echo $MKINIT_MODS | tr ' ' ':')"
+fi
+
+# Constructing the mkinitrd command:
+MKINIT="mkinitrd -c -k $KVER -f $ROOTFS -r $ROOTDEV"
+
+# If we have a module list, add them:
+if ! [ -z "$MLIST" -o "$MLIST" = ":" ]; then
+ MKINIT="$MKINIT -m $MLIST"
+fi
+
+# Deal with LUKS/LVM/RAID:
+if [ "$USING_LUKS" = "1" ]; then
+ MKINIT="$MKINIT -C $REALDEV"
+fi
+if [ "$USING_LVM" = "1" ]; then
+ MKINIT="$MKINIT -L"
+fi
+if [ "$USING_RAID" = "1" ]; then
+ MKINIT="$MKINIT -R"
+fi
+
+if [ -n "$RESUMEDEV" ]; then
+ # Add hibernation partition:
+ MKINIT="$MKINIT -h $RESUMEDEV"
+fi
+if [ -n "$KEYMAP" -a "$KEYMAP" != "us" ]; then
+ # Add non-us keyboard mapping:
+ MKINIT="$MKINIT -l $KEYMAP"
+fi
+if [ -n "$WAIT" -a $WAIT -ne 1 ]; then
+ # Add non-default wait time:
+ MKINIT="$MKINIT -w $WAIT"
+fi
+if ! echo "$MKINIT_PARAMS" | grep -q ' -o ' ; then
+ # Add non-default output filename:
+ MKINIT="$MKINIT -o $IMGFILE"
+fi
+if [ -n "$MKINIT_PARAMS" ]; then
+ # Add user-supplied additional parameters:
+ MKINIT="$MKINIT $MKINIT_PARAMS"
+fi
+
+# Notify the user:
+if [ "$EMIT" = "all" ]; then
+ cat <<-EOT
+ #
+ # $(basename $0) revision $REV
+ #
+ # This script will now make a recommendation about the command to use
+ # in case you require an initrd image to boot a kernel that does not
+ # have support for your storage or root filesystem built in
+ # (such as the Slackware 'generic' kernels').
+ # A suitable 'mkinitrd' command will be:
+
+ $MKINIT
+ EOT
+elif [ "$EMIT" = "run" ]; then
+ echo "$MKINIT"
+elif [ "$EMIT" = "conf" ]; then
+ cat <<-EOT
+ SOURCE_TREE="$SOURCE_TREE"
+ CLEAR_TREE="$CLEAR_TREE"
+ OUTPUT_IMAGE="$IMGFILE"
+ KERNEL_VERSION="$KVER"
+ KEYMAP="$KEYMAP"
+ MODULE_LIST="$(echo $MLIST | cut -f2 -d\ )"
+ LUKSDEV="$REALDEV"
+ ROOTDEV="$ROOTDEV"
+ ROOTFS="$ROOTFS"
+ RESUMEDEV="$RESUMEDEV"
+ RAID="$USING_RAID"
+ LVM="$USING_LVM"
+ WAIT="$WAIT"
+ EOT
+fi
+
+if [ -n "$KFILE" ]; then
+ if [ "$EMIT" = "all" ]; then
+ cat <<-EOT
+ # An entry in 'etc/lilo.conf' for kernel '$KFILE' would look like this:
+ EOT
+ fi
+ if [ "$EMIT" = "all" -o "$EMIT" = "lilo" ]; then
+ # Compensate for the syntax used for the LUKS-on-LVM case:
+ [ "$(basename $ROOTDEV)" = "$ROOTDEV" ] && BASE="/dev/mapper/" || BASE=""
+ cat <<-EOT
+ # Linux bootable partition config begins
+ # initrd created with '$MKINIT'
+ image = $KFILE
+ initrd = $IMGFILE
+ root = $BASE$ROOTDEV
+ label = $KVER
+ read-only
+ # Linux bootable partition config ends
+ EOT
+ fi
+fi
diff --git a/source/a/mkinitrd/mkinitrd_kernelcheck.diff b/source/a/mkinitrd/mkinitrd_kernelcheck.diff
new file mode 100644
index 00000000..e1302f54
--- /dev/null
+++ b/source/a/mkinitrd/mkinitrd_kernelcheck.diff
@@ -0,0 +1,15 @@
+--- mkinitrd.orig 2008-11-30 15:35:58.000000000 +0100
++++ mkinitrd 2008-12-11 11:16:37.000000000 +0100
+@@ -277,6 +277,12 @@
+ esac
+ done
+
++# If kernel modules are needed but the kernel version is absent, exit now:
++if [ ! -d /lib/modules/$KERNEL_VERSION ]; then
++ echo "No modules tree found for kernel \"$KERNEL_VERSION\""
++ exit 1
++fi
++
+ # If clearing source tree was requested, do that first
+ if [ "$CLEAR_TREE" = "1" ]; then
+ clear_source_tree
diff --git a/source/a/mkinitrd/slack-desc b/source/a/mkinitrd/slack-desc
new file mode 100644
index 00000000..49d1a764
--- /dev/null
+++ b/source/a/mkinitrd/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in. You must make
+# exactly 11 lines for the formatting to be correct. It's also customary to
+# leave one space after the ':'.
+
+ |-----handy-ruler------------------------------------------------------|
+mkinitrd: mkinitrd (make an initial ramdisk)
+mkinitrd:
+mkinitrd: mkinitrd is a script to create an initial ramdisk that is loaded at
+mkinitrd: the same time as the kernel. The initial ramdisk may be responsible
+mkinitrd: for loading kernel modules (such a filesystem or SCSI controller
+mkinitrd: module) that are needed to mount the root filesystem.
+mkinitrd:
+mkinitrd: The "initrd" is implemented as an initramfs. See the kernel
+mkinitrd: documentation for more information on this, if you are interested.
+mkinitrd:
+mkinitrd: