1 files changed, 64 insertions, 0 deletions
diff --git a/source/a/floppy/mtools.conf b/source/a/floppy/mtools.conf
new file mode 100644
index 00000000..b528c01d
--- /dev/null
+++ b/source/a/floppy/mtools.conf
@@ -0,0 +1,64 @@
+# Example mtools.conf files.  Uncomment the lines which correspond to
+# your architecture and comment out the "SAMPLE FILE" line below
+#SAMPLE FILE
+
+# # Linux floppy drives
+drive a: file="/dev/fd0" exclusive
+drive b: file="/dev/fd1" exclusive
+
+# # First SCSI hard disk partition
+# drive c: file="/dev/sda1"
+
+# # First IDE hard disk partition
+# drive c: file="/dev/hda1"
+
+# # dosemu floppy image
+# drive m: file="/var/lib/dosemu/diskimage"
+
+# # dosemu hdimage
+# drive n: file="/var/lib/dosemu/diskimage" offset=3840
+
+# # Atari ramdisk image
+# drive o: file="/tmp/atari_rd" offset=136
+
+# # ZIP disk for Solaris:
+# Drive X is ZIP-100 at target 5
+# drive X: file="/dev/rdsk/c0t5d0s2" partition=4 scsi=1 nodelay
+
+# # ZIP disk for SunOS:
+# # Zip drive is at target 5, which default kernel calls tape st1 !!
+# drive Y: file="/dev/rsd5c" partition=4 scsi=1 nodelay
+
+# # autoselect zip drive/floppy on HP-UX 9/10
+#    drive a: file="/dev/rdsk/c201d5"      exclusive partition=4
+#    drive a: file="/dev/rdsk/c201d5s0"    exclusive partition=4
+#    drive a: file="/dev/rfloppy/c201d0s0" exclusive
+
+#          A/UX target 5 on 1st scsi bus   jaz or zip
+# drive X: file="/dev/rdsk/c105d0s31"      partition=4
+
+
+# Some examples for BeOS.
+# floppy drive. hardcoded in devices.c, so no real need to define it here
+#drive a: file="/dev/floppy_disk" exclusive
+# ZIP drive on SCSI ID 6
+#drive z: file="/dev/scsi_disk_060" offset=16384 fat_bits=16                        
+
+# SCO Unix 3.2v4
+# # Floppy disk drives
+#
+# drive a: file="/dev/install" exclusive
+# drive b: file="/dev/install1" exclusive
+#  
+# # SCSI hard disk partitions
+#  
+# drive c: file="/dev/dsk/0sC"
+# drive d: file="/dev/dsk/0sD"
+# drive e: file="/dev/dsk/0sE"
+# drive f: file="/dev/dsk/0sF"
+# drive g: file="/dev/dsk/0sG"
+# drive h: file="/dev/dsk/0sH"
+
+# # uncomment the following line to display all file names in lower
+# # case by default
+# mtools_lower_case=1