diff options
Diffstat (limited to 'libs/libopus/include/opus_projection.h')
| -rw-r--r-- | libs/libopus/include/opus_projection.h | 568 |
1 files changed, 568 insertions, 0 deletions
diff --git a/libs/libopus/include/opus_projection.h b/libs/libopus/include/opus_projection.h new file mode 100644 index 000000000..9dabf4e85 --- /dev/null +++ b/libs/libopus/include/opus_projection.h @@ -0,0 +1,568 @@ +/* Copyright (c) 2017 Google Inc. + Written by Andrew Allen */ +/* + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions + are met: + + - Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + + - Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER + OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, + PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR + PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +*/ + +/** + * @file opus_projection.h + * @brief Opus projection reference API + */ + +#ifndef OPUS_PROJECTION_H +#define OPUS_PROJECTION_H + +#include "opus_multistream.h" + +#ifdef __cplusplus +extern "C" { +#endif + +/** @cond OPUS_INTERNAL_DOC */ + +/** These are the actual encoder and decoder CTL ID numbers. + * They should not be used directly by applications.c + * In general, SETs should be even and GETs should be odd.*/ +/**@{*/ +#define OPUS_PROJECTION_GET_DEMIXING_MATRIX_GAIN_REQUEST 6001 +#define OPUS_PROJECTION_GET_DEMIXING_MATRIX_SIZE_REQUEST 6003 +#define OPUS_PROJECTION_GET_DEMIXING_MATRIX_REQUEST 6005 +/**@}*/ + + +/** @endcond */ + +/** @defgroup opus_projection_ctls Projection specific encoder and decoder CTLs + * + * These are convenience macros that are specific to the + * opus_projection_encoder_ctl() and opus_projection_decoder_ctl() + * interface. + * The CTLs from @ref opus_genericctls, @ref opus_encoderctls, + * @ref opus_decoderctls, and @ref opus_multistream_ctls may be applied to a + * projection encoder or decoder as well. + */ +/**@{*/ + +/** Gets the gain (in dB. S7.8-format) of the demixing matrix from the encoder. + * @param[out] x <tt>opus_int32 *</tt>: Returns the gain (in dB. S7.8-format) + * of the demixing matrix. + * @hideinitializer + */ +#define OPUS_PROJECTION_GET_DEMIXING_MATRIX_GAIN(x) OPUS_PROJECTION_GET_DEMIXING_MATRIX_GAIN_REQUEST, __opus_check_int_ptr(x) + + +/** Gets the size in bytes of the demixing matrix from the encoder. + * @param[out] x <tt>opus_int32 *</tt>: Returns the size in bytes of the + * demixing matrix. + * @hideinitializer + */ +#define OPUS_PROJECTION_GET_DEMIXING_MATRIX_SIZE(x) OPUS_PROJECTION_GET_DEMIXING_MATRIX_SIZE_REQUEST, __opus_check_int_ptr(x) + + +/** Copies the demixing matrix to the supplied pointer location. + * @param[out] x <tt>unsigned char *</tt>: Returns the demixing matrix to the + * supplied pointer location. + * @param y <tt>opus_int32</tt>: The size in bytes of the reserved memory at the + * pointer location. + * @hideinitializer + */ +#define OPUS_PROJECTION_GET_DEMIXING_MATRIX(x,y) OPUS_PROJECTION_GET_DEMIXING_MATRIX_REQUEST, x, __opus_check_int(y) + + +/**@}*/ + +/** Opus projection encoder state. + * This contains the complete state of a projection Opus encoder. + * It is position independent and can be freely copied. + * @see opus_projection_ambisonics_encoder_create + */ +typedef struct OpusProjectionEncoder OpusProjectionEncoder; + + +/** Opus projection decoder state. + * This contains the complete state of a projection Opus decoder. + * It is position independent and can be freely copied. + * @see opus_projection_decoder_create + * @see opus_projection_decoder_init + */ +typedef struct OpusProjectionDecoder OpusProjectionDecoder; + + +/**\name Projection encoder functions */ +/**@{*/ + +/** Gets the size of an OpusProjectionEncoder structure. + * @param channels <tt>int</tt>: The total number of input channels to encode. + * This must be no more than 255. + * @param mapping_family <tt>int</tt>: The mapping family to use for selecting + * the appropriate projection. + * @returns The size in bytes on success, or a negative error code + * (see @ref opus_errorcodes) on error. + */ +OPUS_EXPORT OPUS_WARN_UNUSED_RESULT opus_int32 opus_projection_ambisonics_encoder_get_size( + int channels, + int mapping_family +); + + +/** Allocates and initializes a projection encoder state. + * Call opus_projection_encoder_destroy() to release + * this object when finished. + * @param Fs <tt>opus_int32</tt>: Sampling rate of the input signal (in Hz). + * This must be one of 8000, 12000, 16000, + * 24000, or 48000. + * @param channels <tt>int</tt>: Number of channels in the input signal. + * This must be at most 255. + * It may be greater than the number of + * coded channels (<code>streams + + * coupled_streams</code>). + * @param mapping_family <tt>int</tt>: The mapping family to use for selecting + * the appropriate projection. + * @param[out] streams <tt>int *</tt>: The total number of streams that will + * be encoded from the input. + * @param[out] coupled_streams <tt>int *</tt>: Number of coupled (2 channel) + * streams that will be encoded from the input. + * @param application <tt>int</tt>: The target encoder application. + * This must be one of the following: + * <dl> + * <dt>#OPUS_APPLICATION_VOIP</dt> + * <dd>Process signal for improved speech intelligibility.</dd> + * <dt>#OPUS_APPLICATION_AUDIO</dt> + * <dd>Favor faithfulness to the original input.</dd> + * <dt>#OPUS_APPLICATION_RESTRICTED_LOWDELAY</dt> + * <dd>Configure the minimum possible coding delay by disabling certain modes + * of operation.</dd> + * </dl> + * @param[out] error <tt>int *</tt>: Returns #OPUS_OK on success, or an error + * code (see @ref opus_errorcodes) on + * failure. + */ +OPUS_EXPORT OPUS_WARN_UNUSED_RESULT OpusProjectionEncoder *opus_projection_ambisonics_encoder_create( + opus_int32 Fs, + int channels, + int mapping_family, + int *streams, + int *coupled_streams, + int application, + int *error +) OPUS_ARG_NONNULL(4) OPUS_ARG_NONNULL(5); + + +/** Initialize a previously allocated projection encoder state. + * The memory pointed to by \a st must be at least the size returned by + * opus_projection_ambisonics_encoder_get_size(). + * This is intended for applications which use their own allocator instead of + * malloc. + * To reset a previously initialized state, use the #OPUS_RESET_STATE CTL. + * @see opus_projection_ambisonics_encoder_create + * @see opus_projection_ambisonics_encoder_get_size + * @param st <tt>OpusProjectionEncoder*</tt>: Projection encoder state to initialize. + * @param Fs <tt>opus_int32</tt>: Sampling rate of the input signal (in Hz). + * This must be one of 8000, 12000, 16000, + * 24000, or 48000. + * @param channels <tt>int</tt>: Number of channels in the input signal. + * This must be at most 255. + * It may be greater than the number of + * coded channels (<code>streams + + * coupled_streams</code>). + * @param streams <tt>int</tt>: The total number of streams to encode from the + * input. + * This must be no more than the number of channels. + * @param coupled_streams <tt>int</tt>: Number of coupled (2 channel) streams + * to encode. + * This must be no larger than the total + * number of streams. + * Additionally, The total number of + * encoded channels (<code>streams + + * coupled_streams</code>) must be no + * more than the number of input channels. + * @param application <tt>int</tt>: The target encoder application. + * This must be one of the following: + * <dl> + * <dt>#OPUS_APPLICATION_VOIP</dt> + * <dd>Process signal for improved speech intelligibility.</dd> + * <dt>#OPUS_APPLICATION_AUDIO</dt> + * <dd>Favor faithfulness to the original input.</dd> + * <dt>#OPUS_APPLICATION_RESTRICTED_LOWDELAY</dt> + * <dd>Configure the minimum possible coding delay by disabling certain modes + * of operation.</dd> + * </dl> + * @returns #OPUS_OK on success, or an error code (see @ref opus_errorcodes) + * on failure. + */ +OPUS_EXPORT int opus_projection_ambisonics_encoder_init( + OpusProjectionEncoder *st, + opus_int32 Fs, + int channels, + int mapping_family, + int *streams, + int *coupled_streams, + int application +) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(5) OPUS_ARG_NONNULL(6); + + +/** Encodes a projection Opus frame. + * @param st <tt>OpusProjectionEncoder*</tt>: Projection encoder state. + * @param[in] pcm <tt>const opus_int16*</tt>: The input signal as interleaved + * samples. + * This must contain + * <code>frame_size*channels</code> + * samples. + * @param frame_size <tt>int</tt>: Number of samples per channel in the input + * signal. + * This must be an Opus frame size for the + * encoder's sampling rate. + * For example, at 48 kHz the permitted values + * are 120, 240, 480, 960, 1920, and 2880. + * Passing in a duration of less than 10 ms + * (480 samples at 48 kHz) will prevent the + * encoder from using the LPC or hybrid modes. + * @param[out] data <tt>unsigned char*</tt>: Output payload. + * This must contain storage for at + * least \a max_data_bytes. + * @param [in] max_data_bytes <tt>opus_int32</tt>: Size of the allocated + * memory for the output + * payload. This may be + * used to impose an upper limit on + * the instant bitrate, but should + * not be used as the only bitrate + * control. Use #OPUS_SET_BITRATE to + * control the bitrate. + * @returns The length of the encoded packet (in bytes) on success or a + * negative error code (see @ref opus_errorcodes) on failure. + */ +OPUS_EXPORT OPUS_WARN_UNUSED_RESULT int opus_projection_encode( + OpusProjectionEncoder *st, + const opus_int16 *pcm, + int frame_size, + unsigned char *data, + opus_int32 max_data_bytes +) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(2) OPUS_ARG_NONNULL(4); + + +/** Encodes a projection Opus frame from floating point input. + * @param st <tt>OpusProjectionEncoder*</tt>: Projection encoder state. + * @param[in] pcm <tt>const float*</tt>: The input signal as interleaved + * samples with a normal range of + * +/-1.0. + * Samples with a range beyond +/-1.0 + * are supported but will be clipped by + * decoders using the integer API and + * should only be used if it is known + * that the far end supports extended + * dynamic range. + * This must contain + * <code>frame_size*channels</code> + * samples. + * @param frame_size <tt>int</tt>: Number of samples per channel in the input + * signal. + * This must be an Opus frame size for the + * encoder's sampling rate. + * For example, at 48 kHz the permitted values + * are 120, 240, 480, 960, 1920, and 2880. + * Passing in a duration of less than 10 ms + * (480 samples at 48 kHz) will prevent the + * encoder from using the LPC or hybrid modes. + * @param[out] data <tt>unsigned char*</tt>: Output payload. + * This must contain storage for at + * least \a max_data_bytes. + * @param [in] max_data_bytes <tt>opus_int32</tt>: Size of the allocated + * memory for the output + * payload. This may be + * used to impose an upper limit on + * the instant bitrate, but should + * not be used as the only bitrate + * control. Use #OPUS_SET_BITRATE to + * control the bitrate. + * @returns The length of the encoded packet (in bytes) on success or a + * negative error code (see @ref opus_errorcodes) on failure. + */ +OPUS_EXPORT OPUS_WARN_UNUSED_RESULT int opus_projection_encode_float( + OpusProjectionEncoder *st, + const float *pcm, + int frame_size, + unsigned char *data, + opus_int32 max_data_bytes +) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(2) OPUS_ARG_NONNULL(4); + + +/** Frees an <code>OpusProjectionEncoder</code> allocated by + * opus_projection_ambisonics_encoder_create(). + * @param st <tt>OpusProjectionEncoder*</tt>: Projection encoder state to be freed. + */ +OPUS_EXPORT void opus_projection_encoder_destroy(OpusProjectionEncoder *st); + + +/** Perform a CTL function on a projection Opus encoder. + * + * Generally the request and subsequent arguments are generated by a + * convenience macro. + * @param st <tt>OpusProjectionEncoder*</tt>: Projection encoder state. + * @param request This and all remaining parameters should be replaced by one + * of the convenience macros in @ref opus_genericctls, + * @ref opus_encoderctls, @ref opus_multistream_ctls, or + * @ref opus_projection_ctls + * @see opus_genericctls + * @see opus_encoderctls + * @see opus_multistream_ctls + * @see opus_projection_ctls + */ +OPUS_EXPORT int opus_projection_encoder_ctl(OpusProjectionEncoder *st, int request, ...) OPUS_ARG_NONNULL(1); + + +/**@}*/ + +/**\name Projection decoder functions */ +/**@{*/ + +/** Gets the size of an <code>OpusProjectionDecoder</code> structure. + * @param channels <tt>int</tt>: The total number of output channels. + * This must be no more than 255. + * @param streams <tt>int</tt>: The total number of streams coded in the + * input. + * This must be no more than 255. + * @param coupled_streams <tt>int</tt>: Number streams to decode as coupled + * (2 channel) streams. + * This must be no larger than the total + * number of streams. + * Additionally, The total number of + * coded channels (<code>streams + + * coupled_streams</code>) must be no + * more than 255. + * @returns The size in bytes on success, or a negative error code + * (see @ref opus_errorcodes) on error. + */ +OPUS_EXPORT OPUS_WARN_UNUSED_RESULT opus_int32 opus_projection_decoder_get_size( + int channels, + int streams, + int coupled_streams +); + + +/** Allocates and initializes a projection decoder state. + * Call opus_projection_decoder_destroy() to release + * this object when finished. + * @param Fs <tt>opus_int32</tt>: Sampling rate to decode at (in Hz). + * This must be one of 8000, 12000, 16000, + * 24000, or 48000. + * @param channels <tt>int</tt>: Number of channels to output. + * This must be at most 255. + * It may be different from the number of coded + * channels (<code>streams + + * coupled_streams</code>). + * @param streams <tt>int</tt>: The total number of streams coded in the + * input. + * This must be no more than 255. + * @param coupled_streams <tt>int</tt>: Number of streams to decode as coupled + * (2 channel) streams. + * This must be no larger than the total + * number of streams. + * Additionally, The total number of + * coded channels (<code>streams + + * coupled_streams</code>) must be no + * more than 255. + * @param[in] demixing_matrix <tt>const unsigned char[demixing_matrix_size]</tt>: Demixing matrix + * that mapping from coded channels to output channels, + * as described in @ref opus_projection and + * @ref opus_projection_ctls. + * @param demixing_matrix_size <tt>opus_int32</tt>: The size in bytes of the + * demixing matrix, as + * described in @ref + * opus_projection_ctls. + * @param[out] error <tt>int *</tt>: Returns #OPUS_OK on success, or an error + * code (see @ref opus_errorcodes) on + * failure. + */ +OPUS_EXPORT OPUS_WARN_UNUSED_RESULT OpusProjectionDecoder *opus_projection_decoder_create( + opus_int32 Fs, + int channels, + int streams, + int coupled_streams, + unsigned char *demixing_matrix, + opus_int32 demixing_matrix_size, + int *error +) OPUS_ARG_NONNULL(5); + + +/** Intialize a previously allocated projection decoder state object. + * The memory pointed to by \a st must be at least the size returned by + * opus_projection_decoder_get_size(). + * This is intended for applications which use their own allocator instead of + * malloc. + * To reset a previously initialized state, use the #OPUS_RESET_STATE CTL. + * @see opus_projection_decoder_create + * @see opus_projection_deocder_get_size + * @param st <tt>OpusProjectionDecoder*</tt>: Projection encoder state to initialize. + * @param Fs <tt>opus_int32</tt>: Sampling rate to decode at (in Hz). + * This must be one of 8000, 12000, 16000, + * 24000, or 48000. + * @param channels <tt>int</tt>: Number of channels to output. + * This must be at most 255. + * It may be different from the number of coded + * channels (<code>streams + + * coupled_streams</code>). + * @param streams <tt>int</tt>: The total number of streams coded in the + * input. + * This must be no more than 255. + * @param coupled_streams <tt>int</tt>: Number of streams to decode as coupled + * (2 channel) streams. + * This must be no larger than the total + * number of streams. + * Additionally, The total number of + * coded channels (<code>streams + + * coupled_streams</code>) must be no + * more than 255. + * @param[in] demixing_matrix <tt>const unsigned char[demixing_matrix_size]</tt>: Demixing matrix + * that mapping from coded channels to output channels, + * as described in @ref opus_projection and + * @ref opus_projection_ctls. + * @param demixing_matrix_size <tt>opus_int32</tt>: The size in bytes of the + * demixing matrix, as + * described in @ref + * opus_projection_ctls. + * @returns #OPUS_OK on success, or an error code (see @ref opus_errorcodes) + * on failure. + */ +OPUS_EXPORT int opus_projection_decoder_init( + OpusProjectionDecoder *st, + opus_int32 Fs, + int channels, + int streams, + int coupled_streams, + unsigned char *demixing_matrix, + opus_int32 demixing_matrix_size +) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(6); + + +/** Decode a projection Opus packet. + * @param st <tt>OpusProjectionDecoder*</tt>: Projection decoder state. + * @param[in] data <tt>const unsigned char*</tt>: Input payload. + * Use a <code>NULL</code> + * pointer to indicate packet + * loss. + * @param len <tt>opus_int32</tt>: Number of bytes in payload. + * @param[out] pcm <tt>opus_int16*</tt>: Output signal, with interleaved + * samples. + * This must contain room for + * <code>frame_size*channels</code> + * samples. + * @param frame_size <tt>int</tt>: The number of samples per channel of + * available space in \a pcm. + * If this is less than the maximum packet duration + * (120 ms; 5760 for 48kHz), this function will not be capable + * of decoding some packets. In the case of PLC (data==NULL) + * or FEC (decode_fec=1), then frame_size needs to be exactly + * the duration of audio that is missing, otherwise the + * decoder will not be in the optimal state to decode the + * next incoming packet. For the PLC and FEC cases, frame_size + * <b>must</b> be a multiple of 2.5 ms. + * @param decode_fec <tt>int</tt>: Flag (0 or 1) to request that any in-band + * forward error correction data be decoded. + * If no such data is available, the frame is + * decoded as if it were lost. + * @returns Number of samples decoded on success or a negative error code + * (see @ref opus_errorcodes) on failure. + */ +OPUS_EXPORT OPUS_WARN_UNUSED_RESULT int opus_projection_decode( + OpusProjectionDecoder *st, + const unsigned char *data, + opus_int32 len, + opus_int16 *pcm, + int frame_size, + int decode_fec +) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(4); + + +/** Decode a projection Opus packet with floating point output. + * @param st <tt>OpusProjectionDecoder*</tt>: Projection decoder state. + * @param[in] data <tt>const unsigned char*</tt>: Input payload. + * Use a <code>NULL</code> + * pointer to indicate packet + * loss. + * @param len <tt>opus_int32</tt>: Number of bytes in payload. + * @param[out] pcm <tt>opus_int16*</tt>: Output signal, with interleaved + * samples. + * This must contain room for + * <code>frame_size*channels</code> + * samples. + * @param frame_size <tt>int</tt>: The number of samples per channel of + * available space in \a pcm. + * If this is less than the maximum packet duration + * (120 ms; 5760 for 48kHz), this function will not be capable + * of decoding some packets. In the case of PLC (data==NULL) + * or FEC (decode_fec=1), then frame_size needs to be exactly + * the duration of audio that is missing, otherwise the + * decoder will not be in the optimal state to decode the + * next incoming packet. For the PLC and FEC cases, frame_size + * <b>must</b> be a multiple of 2.5 ms. + * @param decode_fec <tt>int</tt>: Flag (0 or 1) to request that any in-band + * forward error correction data be decoded. + * If no such data is available, the frame is + * decoded as if it were lost. + * @returns Number of samples decoded on success or a negative error code + * (see @ref opus_errorcodes) on failure. + */ +OPUS_EXPORT OPUS_WARN_UNUSED_RESULT int opus_projection_decode_float( + OpusProjectionDecoder *st, + const unsigned char *data, + opus_int32 len, + float *pcm, + int frame_size, + int decode_fec +) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(4); + + +/** Perform a CTL function on a projection Opus decoder. + * + * Generally the request and subsequent arguments are generated by a + * convenience macro. + * @param st <tt>OpusProjectionDecoder*</tt>: Projection decoder state. + * @param request This and all remaining parameters should be replaced by one + * of the convenience macros in @ref opus_genericctls, + * @ref opus_decoderctls, @ref opus_multistream_ctls, or + * @ref opus_projection_ctls. + * @see opus_genericctls + * @see opus_decoderctls + * @see opus_multistream_ctls + * @see opus_projection_ctls + */ +OPUS_EXPORT int opus_projection_decoder_ctl(OpusProjectionDecoder *st, int request, ...) OPUS_ARG_NONNULL(1); + + +/** Frees an <code>OpusProjectionDecoder</code> allocated by + * opus_projection_decoder_create(). + * @param st <tt>OpusProjectionDecoder</tt>: Projection decoder state to be freed. + */ +OPUS_EXPORT void opus_projection_decoder_destroy(OpusProjectionDecoder *st); + + +/**@}*/ + +/**@}*/ + +#ifdef __cplusplus +} +#endif + +#endif /* OPUS_PROJECTION_H */ |